Best Fixes For Tecno Spark Go (2023) Hard Reset

If you are looking for the best fixes for Tecno Spark Go (2023) hard reset, then you have come to the right place. In this guide, we will discuss the best ways to hard reset your Tecno Spark Go (2023) device. We will also provide you with some tips and tricks to help you avoid common issues that may arise during the process.

Do you want to hard reset your Tecno Spark Go (2023) phone? When your phone is not showing its peak performance, it can be very annoying because its working gets slower. If your phone is lagging and apps are not working properly, then there is a problem with its software. The only way to fix this problem is with a hard reset that will restore factory settings in your phone. You can do it to fix your phone or to remove all data if you want to sell it.

If you are facing some troubles with Tecno Spark Go (2023) hard reset, then we have the five best ways to factory reset your phone. Each method is best for certain situations, such as if you forget your password, you only want to erase data, or you want to fix software problems. We will give you simple step-by-step tutorials for each method. Although the procedure is simple, it is best to follow each step.

Using Tecno Spark Go (2023) Hard Reset in What Situations?

1: Erase All Data and Settings

One of the most common reasons for a hard reset is to erase all data and settings from the phone. When your phone runs out of storage, you can only delete the previous data if you want to save something new. Although Tecno Spark Go (2023) phones provide a lot of storage and support SD cards, you can only erase unwanted data if you run out of space. Here is the deal, you can save your data on another device like your laptop and do an Tecno Spark Go (2023) hard reset. This way, you can keep your previous data, make room for new data, and save time.

2: Restore Your Phone Back to Original Operating System and Apps

If your phone is working slower than usual or starts lagging, you can do a factory reset instead of wasting time figuring out the problem. Most problems in a phone come from trash file build-up and software updates. Suppose your phone doesn’t work properly after an update. In that case, you can revert it back to the original operating system by using a factory reset. You can also do it if you don’t like an update’s new features and settings. Before your Tecno Spark Go (2023) hard reset, make sure to backup your data on cloud storage to restore it afterward.

3: Other Situations (like selling your phone…)

Aside from the two situations discussed earlier, you might also have to hard reset your phone in other cases. Let’s say you want to buy a new phone or upgrade to a newer model. You will not use your old phone and will probably sell it. Before you sell it, you have to erase all data and personal information like passwords and accounts from your phone. In another scenario, let’s say your phone is stolen or you lost it. All you need to do is use the Tecno Spark Go (2023) hard reset to ensure no one can access your personal data.

1: Hard Reset from Settings (if you have password)

The easiest way to do an Tecno Spark Go (2023) hard reset is by using the factory reset option in the settings. This method will erase all data and settings, and you can easily do it in two easy steps. But it only works if you know the password of your phone. If you don’t know the password and the phone is unlocked, it will still require a password for confirmation. Follow these steps for a hard reset from settings.

• Open settings and tap on the “system” option.
• Tap on the “Reset Options” in the system menu.
• Tap on Erase all data or factory reset.
• Enter the Password and tap reset for confirmation.
• The system will erase all data and reboot.

2: Restore with Recovery Mode

Suppose you want to hard reset your locked Tecno Spark Go (2023) phone, use the recovery mode. With recovery mode, you don’t have to go to settings and erase data after providing the password. The only drawback of using recovery mode is that it is not best for beginners. Follow these steps for your Tecno Spark Go (2023) hard reset using recovery mode.

• Power off your mobile phone.
• Hold the volume up and power buttons.
• Enter the menu and navigate using the volume up and down buttons.
• Select Wipe data/factory reset using the power button.

3: Dr.Fone - Data Eraser (delete all data and settings)

safe & secure

Click here

If you want to hard reset your phone just to erase all its data and settings, instead of using the long factory reset method, erase data with Dr.Fone. With third-party software like Dr.Fone, you can erase anything from your mobile in one click. It helps you save time, and you don’t have to set up your phone after you are done. You can also restore the erased data using Dr.Fone as well. Here are the steps for erasing data from your mobile using Dr.Fone.

• Launch Dr.Fone on your computer, select “Data Erase”, and connect your mobile with your computer using a USB cable.

• Click on the Start button to erase the data on your mobile.

• Type the key and click on “erase now”.

• Dr.Fone will erase all types of data on your device, and you can see the progress on your computer screen.

4: Dr.Fone - Screen Unlock (when you forget password)

Most people do an Tecno Spark Go (2023) hard reset because they forget their screen lock or password. But it also erases all their data and settings, which is a big loss just to recover a password of their phones. Instead of doing a hard reset, you can use the Dr.Fone screen unlock feature to unlock any phone without password. You can also reset a new password without any complicated procedure. Here is the guide on how to unlock phones with Dr.Fone.

safe & secure

• Launch Dr.Fone on your computer, select “screen lock”, and use a USB cable to connect your mobile with your computer.
• Select Tecno Spark Go (2023) on Dr.Fone and put your phone into the specific mode.

• Dr.Fone will automatically lead your phone to enter the specific mode. After downloading, click “remove now” to open the screen lock. Then wait for the unlock process to complete.

5: Dr.Fone - System Repair (fix some software problems)

safe & secure

If your phone is lagging, or you want to fix software problems, doing a factory reset sounds a bit excessive. It might fix your phone, but you will lose all your data in return. In such cases, you can use the system recovery feature of Dr.Fone to fix any issue with your phone’s software. It can solve display problems, sound issues, heat-up issues, etc. Follow these steps to fix software issues using Dr.Fone.

• Open Dr.Fone on your computer and connect your mobile phone with a USB cable.
• Click on “System Repair” and select “Android Repair.”

• Enter the Tecno Spark Go (2023) device information with its name, model, and country.

• Click on Next and type the code you see on the screen.

Bottom Line

This concludes our article on five ways to hard reset Tecno Spark Go (2023) phones. You might be wondering which method is best for your Tecno Spark Go (2023) hard reset. The best way to factory reset your phone, erase all data, or unlock the screen is by using Dr.Fone. It is multipurpose software that enables users to fix various problems without doing anything. All you need to do is install Dr.Fone on your computer and connect your phone with it. Dr.Fone has various other features like WhatsApp transfer, data recovery, and device transfer.

safe & secure

3 Solutions to Hard Reset Tecno Spark Go (2023) Phone Using PC

Find here 3 easy ways to hard reset Android using ADK or Android Device Manager from your PC. Also, do not forget to back up Android to PC before starting.

There are several cases when someone wants to know about how to hard reset an Android phone using PC. Such cases usually arise when your device is not accessible or stolen. It also involves situations when you forget the password or the unlock pattern of your device, or maybe your phone has frozen and is non-responsive. In such situations, it is very important to know how to reset Android phones to factory settings from the computer.

Factory reset will delete all your user data from internal storage. Thus it is also very important to back up all your internal data of the Tecno Spark Go (2023) device before you hard reset Android via PC. Moreover, a hard reset should be your last option at hand to revive your Android device. Hence, in this article for all the users out there, we have picked up the solution on how to factory reset Android Phone using PC.

You must ensure that all the steps are followed in sync so that the hard reset Android via PC is successful.

Part 1: Back up Android before hard reset

Since factory reset involves removing all data, adjusted settings and logged accounts from the Tecno Spark Go (2023) device; therefore, it is very important to back up all the data before moving on with the factory reset process. So, in this section, we will show you how to first back up your Android device using the Phone Backup . This is an easy-to-use and very convenient Android backup software that can be used to back up an Android device.

Wondershare Dr.Fone

Flexiblely Back up and Restore Android Data

• Back up Android data to the computer with one click.
• Preview and restore the backup to any Android device or iOS device.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restoration.

3,981,454 people have downloaded it

Let’s have a look at the easy process to back up Android before the factory reset it.

Step 1: After installation completes, connect your Android device via data cable and go to “My Backup”. Then, this tool will automatically detect your device.

Step 2: You can now see the file types that will be backed up, such as Contacts, Messages, Calendars, Videos, etc.

Step 3: Click on “Backup pow”  to proceed with the process. The backup process will start, keeping connected the Tecno Spark Go (2023) device during the phone backup process.

Step 4: Within a few minutes, your whole device will be backed up. You can click “View Backups” to view all data that is backed up.

Phone Backup is one of the handiest and easy-to-use features within Wondershare Dr.Fone. Users can select their opted files manually to restore. This tool supports 8000+ Android devices worldwide. Users will feel safe and secure using this revolutionary software.

safe & secure

Part 2: Hard Reset Android using Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) is a user-friendly software tool that helps you unlock your Android device if you forget the passcode, pattern lock, PIN, or face/fingerprint lock. It supports various Android devices, allows you to bypass lock screens without data loss, and provides step-by-step instructions for easy unlocking. It also helps with FRP unlock and works on both Windows and Mac systems.

Step 1: Launch Dr.Fone - Screen Unlock on your computer and select “Screen Unlock” from the main interface. After that , you need to connect your Android phone to the computer using a USB cable.

Step 2: Choose “Android” > click “Unlock Android Screen” if you want to remove the lock screen. Choose your device brand. The hard reset methods vary for different device brands, so make sure that you choose the correct device brand.

Step 3: Put the Android phone into Specific mode with the help of Dr.Fone. And then, Dr.Fone will factory reset your Android phone within a few minutes. Now you can access your Android phone without a password!

safe & secure

In this process, we will learn how to hard reset Android phone to factory settings from a computer using SDK. This involves removing all data from the Tecno Spark Go (2023) device using a PC.

Follow the given steps to know how to hard reset an Android phone using PC.

Pre-Requirements

• PC that runs on Windows (Linux/Mac installer is also available)

• You have to download Android ADB tools on your computer. Android ADB Download: https://developer.android.com/studio
• A USB Cable to connect your Tecno Spark Go (2023) with your computer.

Steps to hard reset Android using SDK

Step 1: Enable USB Debugging in the Android settings. Open Settings>Developer options>USB Debugging. If developer options can’t be found on the Tecno Spark Go (2023) device, then please go to Settings > General > About phone > Common > Software info (tap on it 5-8 times).

Step 2: Install Android SDK Tools. Ensure that Platform-tools and USB drivers are selected in the SDK manager window.

Step 3: Ensure that the drivers for your Android are installed on your PC or at least the Generic drivers are present

Step 4: Connect the Tecno Spark Go (2023) device to the PC using a USB cable. Ensure that the Tecno Spark Go (2023) device is recognized in the Windows Device Manager.

Step 5: Open the command prompt in Windows and go to C:\Users\Your username\AppData\Local\Android\android-sdk\platform-tools

Step 6: Type ADB reboot recovery and the Tecno Spark Go (2023) device will restart. The recovery menu must appear after this

Step 7: The device can be disconnected now. Now, you can remove the password or simply Factory Reset the Tecno Spark Go (2023) device.

Now, you have successfully reset your device using a PC.

Although the first process is the easiest, in certain cases, you might have to look for other options too. Kindly follow the steps thoroughly and format your device with ease.

Part 4: Hard reset Android using Android Device Manager (Find My Device)

When someone loses their phone, or it is stolen, the two questions that commonly arise are: how to locate the phone? And if it is not possible, how to remotely wipe the phone’s data? People can use the Android Device Manager (also referred to as “Find My Device”) and do the exact two things. The best thing about this is that it doesn’t need to be installed as it is inbuilt on all Android Devices.

Let us look at the following steps to know how to reset Android phones to factory settings from the computer.

Requirements for Android Device Manager to Work:

• It must be activated in the Tecno Spark Go (2023) device administrator settings. Go to settings > Security > Device administrators and check whether ADM is enabled as a device administrator or not.
• The location of the Tecno Spark Go (2023) device must be ON
• The device must be signed in to a Google account
• The device must have an active internet connection
• The device should not be switched off
• Even if the Tecno Spark Go (2023) device is without SIM, the Google account must be active

Steps to use ADM to wipe or locate any Android Device:

Step 1: Directly go to the Android Device Manager website , and log in to your account. You will get three options: “Play Sound”, “Secure Device” and “Erase Device”.

Step 2: Click on the “Play Sound” option will make it raise the alarm, notifying of the location, you can easily locate your Android phone if it is nearby.

Step 3: Click “Secure Device”, you can remotely lock your device with a new passcode, display a custom message on the lock screen, and even track the Tecno Spark Go (2023) device’s location in real-time. It also gives you the option to add a contact number, so anyone who finds your device can reach out to you.

Step 4: Select “Erase Device” to reset your device. Once you select this option, the interface will take over and complete the job. Congratulations! You have successfully used the Android Device Manager (ADM) to reset your Android smartphone.

The Bottom Line

So these were the third different methods through which you can hard reset your Android device. Resetting the Tecno Spark Go (2023) device involves removing every data from the Tecno Spark Go (2023) device. The phone gets back to the same state as it was out of the box. Hence, most importantly, do not forget to back up data using Phone Backup and restore beforehand so that you do not end up losing anything important.

All About Factory Reset, What Is It and What It Does to Your Tecno Spark Go (2023)?

I bought a new phone and want to sell my old Tecno Spark Go (2023) 3, so I need to clear my data off it. Can someone guide me on how to factory reset the Tecno Spark Go (2023) 3 so I can sell it?

As we all know, force restart and even factory reset can resolve many problems on our phones. Sometimes when you want to sell your old phone, you need to factory reset it to clear your data off it. Also, if there is some issue like a screen lock, you can factory reset it to unlock your phone. But do you know how to do a factory reset Tecno Spark Go (2023) 3 correctly?

Therefore, we have gathered all that you need to know about a factory reset. After going through this article, you can factory reset Tecno Spark Go (2023) phones. So, keep following to resolve your Tecno Spark Go (2023) issues.

Part 1: What is Tecno Spark Go (2023) Factory Reset?

Principles of Tecno Spark Go (2023) Factory Reset

Before you reset your Tecno Spark Go (2023) phone, you must ensure your data is all backed up someplace. It can be either on another device or transferred to the cloud. While changing your phone, you can exchange data from your old Tecno Spark Go (2023) without much stretch. If you own a Tecno Spark Go (2023), a large portion of your data is put away securely in servers.

One way or another, you must twofold check these things before a factory reset:

• Google ID
• Contacts
• Pictures Gallery
• Passwords
• Music

Steps to Start Tecno Spark Go (2023) Factory Reset

Now is the right time to factory reset Tecno Spark Go (2023) when you have everything backed up. The following steps will help you factory reset your Tecno Spark Go (2023):

• On your Tecno Spark Go (2023), head into the settings application. Look over right down and search for System and click it. Look down and search for Reset options.

• Go to System and tap the “Erase all data” option.

• Note: After tapping this, the following page will allow you to see what will be cleaned from the Tecno Spark Go (2023) device. Make sure everything is covered in your backup.
• Pick whether you need to delete any downloaded SIMs and tap Erase all data.

• You might need to enter your password to complete the reset.

Differences Between Hard Reset and Factory Reset

A factory reset deletes everything from your Tecno Spark Go (2023) device. You might utilize a factory reset when your phone could have a virus or when it is seriously breaking down. A factory reset returns your Tecno Spark Go (2023) to its factory settings, driving you to set it up again as a new phone.

A hard reset is a basic rebooting of your cell phone. It doesn’t influence the data on your Tecno Spark Go (2023). You might utilize a hard reset when your Tecno Spark Go (2023) is acting slow. However, it is different from a standard reboot of your Tecno Spark Go (2023).

Part 2: What can Tecno Spark Go (2023) Factory Reset do?

A factory reset deletes every user information, application, related application data, and settings on your pixel phone. It is like hard drive reformatting in a PC. However, a factory reset fixes different hardware and software-related issues. It also unlocks your phone in case you forget your lock screen password, or you need to factory reset Tecno Spark Go (2023) before selling it to protect your privacy.

Part 3: 2 Easy Ways to improve your Tecno Spark Go (2023) Factory Reset

1. Dr.Fone - Data Eraser

You can use Dr.Fone Data Eraser to reset your Tecno Spark Go (2023) phone within minutes. Whether you need to sell your old Tecno Spark Go (2023) or want to make it look like a new one, you can delete its files with Dr.Fone - Data Eraser. All private data and downloads are taken out. Moreover, you can delete your Tecno Spark Go (2023) even if its software is corrupted. Additionally, you can erase specific documents on your Tecno Spark Go (2023) also. The other Tecno Spark Go (2023) data and settings will be protected in this case. So, here is the Wondershare Dr.Fone step-by-step guide to doing so:

safe & secure

• Launch the Wondershare Dr.Fone software and click the “Data Eraser” from the main window.

• Connect your Tecno Spark Go (2023) and PC using a connector. Please make sure that USB Debugging is on in your Tecno Spark Go (2023).

• The software will automatically read your Tecno Spark Go (2023) phone and start to erase your files. Click “Erase All Data.”

• Type in “000000” to affirm your activity and continue.

• Then, at that point, Dr.Fone will ask you to click the Factory Reset option on your Tecno Spark Go (2023). You can also select “Erase All Data” to reset your Tecno Spark Go (2023).

2. Dr.Fone - Phone Backup

As we mentioned before, we recommend you back up your files before a factory reset. You can use Dr.Fone - Phone Backup (Android) to back up data without any hassle and data loss. With this tool, backing up your Tecno Spark Go (2023) has never been simpler. The program makes it simple to back up your Tecno Spark Go (2023) data to the PC and recover supporting data for your Android gadget. Now let’s find out how you can back up and upload your Tecno Spark Go (2023) files.

safe & secure

• Open Dr.Fone Phone Backup on your PC, and select the “Phone Backup” option.

• Connect your Tecno Spark Go (2023) and PC through a USB connector. However, make sure to permit USB Debugging on your Tecno Spark Go (2023).

Click here

• Click “Backup” to begin the backup of Tecno Spark Go (2023) data.
• After the connection, select the File types you need to upload. Of course, Dr.Fone has checked all the document types for you. Then click on backup to begin the process. It will require a short time. Kindly don’t detach your Tecno Spark Go (2023) nor use it during the backup.

• After the backup is finished, you can tap on the “View the Backup” button to see what’s in the document.

The Bottom Line

Factory resetting is not ideal for some problems, but sometimes it becomes the only possible solution. So, if you have your phone stuck or want to sell your old phone, you need to factory reset Tecno Spark Go (2023). But make sure to back up your phone before going for a reset. You can back up your files before a factory reset using Dr.Fone - Phone Backup (Android).

safe & secure

Also read: