Best Fixes For Tecno Spark 10 Pro Hard Reset

If you are looking for the best fixes for Tecno Spark 10 Pro hard reset, then you have come to the right place. In this guide, we will discuss the best ways to hard reset your Tecno Spark 10 Pro device. We will also provide you with some tips and tricks to help you avoid common issues that may arise during the process.

Do you want to hard reset your Tecno Spark 10 Pro phone? When your phone is not showing its peak performance, it can be very annoying because its working gets slower. If your phone is lagging and apps are not working properly, then there is a problem with its software. The only way to fix this problem is with a hard reset that will restore factory settings in your phone. You can do it to fix your phone or to remove all data if you want to sell it.

If you are facing some troubles with Tecno Spark 10 Pro hard reset, then we have the five best ways to factory reset your phone. Each method is best for certain situations, such as if you forget your password, you only want to erase data, or you want to fix software problems. We will give you simple step-by-step tutorials for each method. Although the procedure is simple, it is best to follow each step.

Using Tecno Spark 10 Pro Hard Reset in What Situations?

1: Erase All Data and Settings

One of the most common reasons for a hard reset is to erase all data and settings from the phone. When your phone runs out of storage, you can only delete the previous data if you want to save something new. Although Tecno Spark 10 Pro phones provide a lot of storage and support SD cards, you can only erase unwanted data if you run out of space. Here is the deal, you can save your data on another device like your laptop and do an Tecno Spark 10 Pro hard reset. This way, you can keep your previous data, make room for new data, and save time.

2: Restore Your Phone Back to Original Operating System and Apps

If your phone is working slower than usual or starts lagging, you can do a factory reset instead of wasting time figuring out the problem. Most problems in a phone come from trash file build-up and software updates. Suppose your phone doesn’t work properly after an update. In that case, you can revert it back to the original operating system by using a factory reset. You can also do it if you don’t like an update’s new features and settings. Before your Tecno Spark 10 Pro hard reset, make sure to backup your data on cloud storage to restore it afterward.

3: Other Situations (like selling your phone…)

Aside from the two situations discussed earlier, you might also have to hard reset your phone in other cases. Let’s say you want to buy a new phone or upgrade to a newer model. You will not use your old phone and will probably sell it. Before you sell it, you have to erase all data and personal information like passwords and accounts from your phone. In another scenario, let’s say your phone is stolen or you lost it. All you need to do is use the Tecno Spark 10 Pro hard reset to ensure no one can access your personal data.

1: Hard Reset from Settings (if you have password)

The easiest way to do an Tecno Spark 10 Pro hard reset is by using the factory reset option in the settings. This method will erase all data and settings, and you can easily do it in two easy steps. But it only works if you know the password of your phone. If you don’t know the password and the phone is unlocked, it will still require a password for confirmation. Follow these steps for a hard reset from settings.

• Open settings and tap on the “system” option.
• Tap on the “Reset Options” in the system menu.
• Tap on Erase all data or factory reset.
• Enter the Password and tap reset for confirmation.
• The system will erase all data and reboot.

2: Restore with Recovery Mode

Suppose you want to hard reset your locked Tecno Spark 10 Pro phone, use the recovery mode. With recovery mode, you don’t have to go to settings and erase data after providing the password. The only drawback of using recovery mode is that it is not best for beginners. Follow these steps for your Tecno Spark 10 Pro hard reset using recovery mode.

• Power off your mobile phone.
• Hold the volume up and power buttons.
• Enter the menu and navigate using the volume up and down buttons.
• Select Wipe data/factory reset using the power button.

3: Dr.Fone - Data Eraser (delete all data and settings)

safe & secure

If you want to hard reset your phone just to erase all its data and settings, instead of using the long factory reset method, erase data with Dr.Fone. With third-party software like Dr.Fone, you can erase anything from your mobile in one click. It helps you save time, and you don’t have to set up your phone after you are done. You can also restore the erased data using Dr.Fone as well. Here are the steps for erasing data from your mobile using Dr.Fone.

• Launch Dr.Fone on your computer, select “Data Erase”, and connect your mobile with your computer using a USB cable.

• Click on the Start button to erase the data on your mobile.

• Type the key and click on “erase now”.

• Dr.Fone will erase all types of data on your device, and you can see the progress on your computer screen.

4: Dr.Fone - Screen Unlock (when you forget password)

Most people do an Tecno Spark 10 Pro hard reset because they forget their screen lock or password. But it also erases all their data and settings, which is a big loss just to recover a password of their phones. Instead of doing a hard reset, you can use the Dr.Fone screen unlock feature to unlock any phone without password. You can also reset a new password without any complicated procedure. Here is the guide on how to unlock phones with Dr.Fone.

safe & secure

• Launch Dr.Fone on your computer, select “screen lock”, and use a USB cable to connect your mobile with your computer.
• Select Tecno Spark 10 Pro on Dr.Fone and put your phone into the specific mode.

• Dr.Fone will automatically lead your phone to enter the specific mode. After downloading, click “remove now” to open the screen lock. Then wait for the unlock process to complete.

5: Dr.Fone - System Repair (fix some software problems)

safe & secure

If your phone is lagging, or you want to fix software problems, doing a factory reset sounds a bit excessive. It might fix your phone, but you will lose all your data in return. In such cases, you can use the system recovery feature of Dr.Fone to fix any issue with your phone’s software. It can solve display problems, sound issues, heat-up issues, etc. Follow these steps to fix software issues using Dr.Fone.

• Open Dr.Fone on your computer and connect your mobile phone with a USB cable.
• Click on “System Repair” and select “Android Repair.”

• Enter the Tecno Spark 10 Pro device information with its name, model, and country.

• Click on Next and type the code you see on the screen.

Bottom Line

This concludes our article on five ways to hard reset Tecno Spark 10 Pro phones. You might be wondering which method is best for your Tecno Spark 10 Pro hard reset. The best way to factory reset your phone, erase all data, or unlock the screen is by using Dr.Fone. It is multipurpose software that enables users to fix various problems without doing anything. All you need to do is install Dr.Fone on your computer and connect your phone with it. Dr.Fone has various other features like WhatsApp transfer, data recovery, and device transfer.

safe & secure

Is your Tecno Spark 10 Pro working too slow? Here’s how you can hard reset it

If Tecno Spark 10 Pro 3.4 hard reset or Tecno Spark 10 Pro hard reset is the only option for your mobile phone, you can perform a factory reset to make your device function as it did on the first day. You may need a hard reset if it works slowly, hangs, you want to bypass screen lock, your memory is full, and you want to erase everything, you want to sell or give your device away, and you don’t want anyone to be able to access your files or passwords.

The following instructions will show you how to completely wipe up all of your data and restore the Tecno Spark 10 Pro to its factory-fresh condition.

Part 1: Why do I Need to Hard Reset My Tecno Spark 10 Pro?

We advise you to remove all accounts from the Tecno Spark 10 Pro device before performing a factory reset, especially if you plan to sell, give away, or donate the 3.4. It is also a good idea to unlink the Google account. By doing this, we can prevent issues for new users as some more recent smartphones have a feature called FRP, or Factory Reset Protection, which requires the Google account or PIN number that was originally used to set up the Tecno Spark 10 Pro when a device is factory restored.

Part 2: How to Hard Reset My Tecno Spark 10 Pro

1. Fastboot Mode

• Shut down your phone.
• Add a USB cord to your computer or laptop.
• Your phone should now start up in Fastboot Mode after you press and hold the Volume Down + Power buttons for a few seconds. Tecno Spark 10 Pro Recovery Mode and Fastboot Mode
• Using the ADB command, start Tecno Spark 10 Pro in Bootloader Mode or Fastboot Mode.
• If your computer has ADB and Fastboot drivers installed, and your phone has USB debugging turned on, execute the command below after connecting it.
• Launch Command Prompt (CMD) on your PC, then type the command listed below.

reboot bootloader using adb

• After some time, you will see that your Tecno Spark 10 Pro has been hard reset.

2. Hard reset with hardware key button

• Choose “wipe data/factory reset” on your Tecno Spark 10 Pro to do a hard reset. Scroll down with the Volume buttons, and press the Power key to agree.
• Next, choose yes from the menu if further confirmation is required, and then click the Power button once.
• Lastly, press the Power key and choose the Reboot system.
• Do not forget to charge your phone.
• Initially, turn off your phone.
• Now Press the Volume Up + Power key for a few seconds to enter recovery mode.
• Press and hold the Power and Volume Up buttons at the same time until the Tecno Spark 10 Pro device vibrates. Release all the presses if the Tecno Spark 10 Pro logo or Recovery screen shows.
• You can give your phone up to 30 seconds to display the recovery screen.

Bonus Tips

Dr.Fone - Data Eraser (delete all data completely)

Dr.Fone - Data Eraser helps you quickly get rid of all the unwanted information and all of your data however it is always advisable to back it up using the Dr.Fone - Phone Backup.

Let’s see how you can delete completely all the data using Dr.Fone - Data Eraser. do not worry the next section is about how you can back up and restore the data before erasing it completely using Dr.Fone - Phone Backup.

Step 1: Connect your Tecno Spark 10 Pro smartphone to your computer. Start Dr.Fone on your computer. Select “Data Eraser” from the tool list.

Connect your Tecno Spark 10 Pro to the PC via a USB wire. Ensure that your phone has USB debugging turned on. You will see a pop-up window on your phone asking you to approve USB debugging.

Step 2: Begin wiping your Tecno Spark 10 Pro phone.

Dr.Fone will then automatically recognize and connect to your Tecno Spark 10 Pro smartphone. To begin wiping all of your data, select “Erase All Data.”.

Before proceeding, ensure that you have backed up any critical data because deleted data cannot be retrieved. After that, type “000000” to confirm your activity.

Dr. Fone will next proceed to wipe the data on your Tecno Spark 10 Pro phone. The entire procedure takes only a few minutes. Turn off the phone and do not run any phone administration programs on the PC.

Step 3: Reset your phone’s factory data.

Once all app data, photos, and other private data have been completely erased, Dr.Fone will advise you to touch on Factory Data Reset or Erase All Data on the phone. You may use this to completely delete the phone’s settings.

Your Tecno Spark 10 Pro phone has now been completely wiped, giving it the appearance of being brand new.

safe & secure

Dr.Fone - Phone Backup (easy backup before a new hard reset)

Step 1: Connect your Tecno Spark 10 Pro phone to your PC.

Launch Dr.Fone on your PC and choose “Phone Backup” from the list of options.

Then, connect your Tecno Spark 10 Pro phone to the computer using a USB cord. Please ensure that the phone is in USB debugging mode. If your Tecno Spark 10 Pro version is 4.2.2 or higher, a pop-up window on the Tecno Spark 10 Pro phone will prompt you to accept USB Debugging. Please press the OK button.

To begin backing up the data on your Tecno Spark 10 Pro phone, click Backup.

If you have previously used this application to back up your device, you may examine your backup history by clicking on “View backup history.”

Step 2: Choose which file types to back up.

After connecting the Tecno Spark 10 Pro phone, pick the file types you wish to back up. Dr.Fone has already tested all of the file kinds for you. Then, to begin the backup process, click Backup.

The backup will take a few moments. Please do not detach your Tecno Spark 10 Pro phone, use it, or erase any data from it during the backup process.

When the backup is finished, you can view the contents of the backup file by clicking the View the backup button.

safe & secure

The Bottom Line

Now that you know how to hard reset Tecno Spark 10 Pro it is time to implement all the possible ways and see which one works for you. We also recommend you to proceed with backing up and restoration of all the information so that you will not have to repent in the end. It is all about using smart tools like Dr.Fone - Data Eraser and Dr.Fone - Phone Backup.

Hard Resetting an Tecno Spark 10 Pro Device Made Easy

If you have owned any Tecno Spark 10 Pro smartphone, you should know about the UI features these handsets offer. The new age of Color OS has been giving the best client experience. Moreover, it is easier to hard reset your Tecno Spark 10 Pro phone if you need to sell a phone. This article will guide you on resetting Tecno Spark 10 Pro phone with simple steps.

We have shared a step-by-step manual on how you can perform Tecno Spark 10 Pro hard reset. Several methods are mentioned in this article, and all of them are tested. Resetting any Tecno Spark 10 Pro phone is not a hard task. You should know about the right steps. However, we suggest you use Dr.Fone - Data Eraser for better results and more commands. It is hassle-free software and lets you selectively delete the desired data from your phone.

Part 1: Some Common Causes of Tecno Spark 10 Pro Hard Reset

There are many occasions when a person may want to hard reset their Tecno Spark 10 Pro phone. Some of these are:

• If your Tecno Spark 10 Pro runs too slowly, you may need to reset it to clear some space.
• When you lose your password or pattern, you will need to reset your device hard to remove the screen lock.
• You can repair a frozen or stuck screen using a hard reset.
• If your phone is constantly crashing, and you want to make your experience smoother, a hard reset may help.
• Lastly, you need to remove everything from your phone when you are looking to sell your phone. In such cases, a hard reset will do your work quickly.

Part 2: 2 simple ways to hard reset your Tecno Spark 10 Pro

1. Hard Reset from Settings

• Step 1. Go to the Settings application on your Tecno Spark 10 Pro phone and open System Settings.

• Step 2. Go to the “Backup and Reset” menu and click the “Reset Phone” option.
• Step 3. The phone will show numerous choices to reset. It includes resetting network settings, system settings only, contacts, call logs, messages, etc. Moreover, there will be the “Erase All Data” option too.
• Step 4. To hard reset Tecno Spark 10 Pro, pick the Erase All Data option to reset your device and bring it to factory settings.

2. From Recovery Mode (By Hardware Keys)

Hard resetting Tecno Spark 10 Pro smartphones is also simple, assuming you know the right steps. The following are the steps to get to the recovery mode on Tecno Spark 10 Pro smartphones and do an Oppo hard reset. This method is quite helpful when you don’t remember your phone’s screen lock.

• Step 1: Make sure to power off your Tecno Spark 10 Pro smartphone to get started. Press and hold the power key on your Tecno Spark 10 Pro phone for about 10 seconds.
• Step 2: Simultaneously, press and hold the power and Volume down keys until the Tecno Spark 10 Pro logo springs up on the screen. This will bring the Recovery mode screen.
• Step 3: Select your preferred language using the Volume and Power buttons, and then tap on “Wipe Data”.

• Step 4: You will be approached to enter the confirmation code (screen lock PIN).
• Step 5: Complete step 4 and afterward select the Format data choice.
• Step 6: Select OK to finish the hard reset strategy on your Oppo device.

Part 3: Best Tools to Make your Tecno Spark 10 Pro Hard Reset Easier

To make your Oppo hard reset experience easier, you need to look for an expert service. We would suggest you use Wondershare Dr.Fone. Dr.Fone is an all-in-one professional software for screen unlock, data erasure, data recovery, system repair, and more. In case of a hard reset, if you have forgotten the screen lock, you can use their Screen Unlock feature. Interestingly, their Data Erasure software provides the full command to its users. You can use it to delete the desired files or fully reset your phone. Overall, it is a safe tool with an almost 100% access rate. It works with almost 99% of the Android phones available in the market and has great customer support service. Therefore, download it right away and make your hard reset experience smoother.

Steps to Use Dr.Fone - Screen Unlock (Android)

• Step 1: After launching Dr.Fone, please use a USB cable to connect your Tecno Spark 10 Pro phone. And tap the “Screen Unlock” option.
• Step 2: Please select the left part with 3 phones, “Unlock Android Screen” to proceed.

• Step 3: To unlock Tecno Spark 10 Pro phone, the left “100% Remove Screen Lock” is the only feasible way. In this interface, we include most android brands. And as Tecno Spark 10 Pro user, it’s also in the list we offered.

• Step 4: Recovery mode is the key step for the whole process. Here is a simple guide to help you hard reset your Tecno Spark 10 Pro device.

• Congrats! You’re able to access your Tecno Spark 10 Pro phone without hassle and it’s already hard reset!

safe & secure

Steps to Use Dr.Fone - Data Eraser (Android)

• Step 1: Open Dr.Fone’s program and select the “Data Eraser” tool.
• Step 2: Connect your Tecno Spark 10 Pro phone to the PC through a USB connector.
• Step 3: Click on the “Erase All Data” button to begin. Ensure you have backed up your important files before you continue.

• Step 4: Then type in “000000” to affirm your action. Then Dr.Fone will begin deleting all data on your phone.

• Step 5: Tap on Factory Data Reset or Erase All Data on the phone. This will assist you with totally cleaning up the settings on the phone.

• Presently, your Android phone has been wiped, and it can be used as a new one.

safe & secure

Conclusion

Resetting an Tecno Spark 10 Pro phone can be tricky sometimes; therefore, it should be finished with the right tools and strategies. Above, we have listed multiple ways to hard reset Tecno Spark 10 Pro. You need to pick the best strategy according to your situation. However, for an easy, solid, protected, and speedy technique, we recommend Dr.Fone by Wondershare . It provides multiple tools in a single program and has a higher success ratio compared to the other methods. So install it right away for a speedy hard reset of your Tecno Spark 10 Pro device.

You Might Also Like

Also read: