Your Complete Guide To Reset Tecno Pop 8 | Dr.fone

Your Complete Guide To Reset Tecno Pop 8 | Dr.fone

Ian Lv13

Best Fixes For Tecno Pop 8 Hard Reset

If you are looking for the best fixes for Tecno Pop 8 hard reset, then you have come to the right place. In this guide, we will discuss the best ways to hard reset your Tecno Pop 8 device. We will also provide you with some tips and tricks to help you avoid common issues that may arise during the process.

Do you want to hard reset your Tecno Pop 8 phone? When your phone is not showing its peak performance, it can be very annoying because its working gets slower. If your phone is lagging and apps are not working properly, then there is a problem with its software. The only way to fix this problem is with a hard reset that will restore factory settings in your phone. You can do it to fix your phone or to remove all data if you want to sell it.

If you are facing some troubles with Tecno Pop 8 hard reset, then we have the five best ways to factory reset your phone. Each method is best for certain situations, such as if you forget your password, you only want to erase data, or you want to fix software problems. We will give you simple step-by-step tutorials for each method. Although the procedure is simple, it is best to follow each step.

Using Tecno Pop 8 Hard Reset in What Situations?

1: Erase All Data and Settings

One of the most common reasons for a hard reset is to erase all data and settings from the phone. When your phone runs out of storage, you can only delete the previous data if you want to save something new. Although Tecno Pop 8 phones provide a lot of storage and support SD cards, you can only erase unwanted data if you run out of space. Here is the deal, you can save your data on another device like your laptop and do an Tecno Pop 8 hard reset. This way, you can keep your previous data, make room for new data, and save time.

2: Restore Your Phone Back to Original Operating System and Apps

If your phone is working slower than usual or starts lagging, you can do a factory reset instead of wasting time figuring out the problem. Most problems in a phone come from trash file build-up and software updates. Suppose your phone doesn’t work properly after an update. In that case, you can revert it back to the original operating system by using a factory reset. You can also do it if you don’t like an update’s new features and settings. Before your Tecno Pop 8 hard reset, make sure to backup your data on cloud storage to restore it afterward.

3: Other Situations (like selling your phone…)

Aside from the two situations discussed earlier, you might also have to hard reset your phone in other cases. Let’s say you want to buy a new phone or upgrade to a newer model. You will not use your old phone and will probably sell it. Before you sell it, you have to erase all data and personal information like passwords and accounts from your phone. In another scenario, let’s say your phone is stolen or you lost it. All you need to do is use the Tecno Pop 8 hard reset to ensure no one can access your personal data.

1: Hard Reset from Settings (if you have password)

The easiest way to do an Tecno Pop 8 hard reset is by using the factory reset option in the settings. This method will erase all data and settings, and you can easily do it in two easy steps. But it only works if you know the password of your phone. If you don’t know the password and the phone is unlocked, it will still require a password for confirmation. Follow these steps for a hard reset from settings.

  • Open settings and tap on the “system” option.
  • Tap on the “Reset Options” in the system menu.
  • Tap on Erase all data or factory reset.
  • Enter the Password and tap reset for confirmation.
  • The system will erase all data and reboot.

2: Restore with Recovery Mode

Suppose you want to hard reset your locked Tecno Pop 8 phone, use the recovery mode. With recovery mode, you don’t have to go to settings and erase data after providing the password. The only drawback of using recovery mode is that it is not best for beginners. Follow these steps for your Tecno Pop 8 hard reset using recovery mode.

  • Power off your mobile phone.
  • Hold the volume up and power buttons.
  • Enter the menu and navigate using the volume up and down buttons.
  • Select Wipe data/factory reset using the power button.

3: Dr.Fone - Data Eraser (delete all data and settings)

safe Downloadsafe & secure

If you want to hard reset your phone just to erase all its data and settings, instead of using the long factory reset method, erase data with Dr.Fone. With third-party software like Dr.Fone, you can erase anything from your mobile in one click. It helps you save time, and you don’t have to set up your phone after you are done. You can also restore the erased data using Dr.Fone as well. Here are the steps for erasing data from your mobile using Dr.Fone.

  • Launch Dr.Fone on your computer, select “Data Erase”, and connect your mobile with your computer using a USB cable.

drfone home interface

  • Click on the Start button to erase the data on your mobile.

data eraser interface

  • Type the key and click on “erase now”.

erase all data interface

  • Dr.Fone will erase all types of data on your device, and you can see the progress on your computer screen.

erasing data progress interface

4: Dr.Fone - Screen Unlock (when you forget password)

Most people do an Tecno Pop 8 hard reset because they forget their screen lock or password. But it also erases all their data and settings, which is a big loss just to recover a password of their phones. Instead of doing a hard reset, you can use the Dr.Fone screen unlock feature to unlock any phone without password. You can also reset a new password without any complicated procedure. Here is the guide on how to unlock phones with Dr.Fone.

safe Downloadsafe & secure

  • Launch Dr.Fone on your computer, select “screen lock”, and use a USB cable to connect your mobile with your computer.
  • Select Tecno Pop 8 on Dr.Fone and put your phone into the specific mode.

select your device interface

  • Dr.Fone will automatically lead your phone to enter the specific mode. After downloading, click “remove now” to open the screen lock. Then wait for the unlock process to complete.

device recover interface

5: Dr.Fone - System Repair (fix some software problems)

safe Downloadsafe & secure

If your phone is lagging, or you want to fix software problems, doing a factory reset sounds a bit excessive. It might fix your phone, but you will lose all your data in return. In such cases, you can use the system recovery feature of Dr.Fone to fix any issue with your phone’s software. It can solve display problems, sound issues, heat-up issues, etc. Follow these steps to fix software issues using Dr.Fone.

  • Open Dr.Fone on your computer and connect your mobile phone with a USB cable.
  • Click on “System Repair” and select “Android Repair.”

system repair interface

  • Enter the Tecno Pop 8 device information with its name, model, and country.

device information form

  • Click on Next and type the code you see on the screen.

code confirmation interface

Bottom Line

This concludes our article on five ways to hard reset Tecno Pop 8 phones. You might be wondering which method is best for your Tecno Pop 8 hard reset. The best way to factory reset your phone, erase all data, or unlock the screen is by using Dr.Fone. It is multipurpose software that enables users to fix various problems without doing anything. All you need to do is install Dr.Fone on your computer and connect your phone with it. Dr.Fone has various other features like WhatsApp transfer, data recovery, and device transfer.

Safe downloadsafe & secure

Is your Tecno Pop 8 working too slow? Here’s how you can hard reset it

If Tecno Pop 8 3.4 hard reset or Tecno Pop 8 hard reset is the only option for your mobile phone, you can perform a factory reset to make your device function as it did on the first day. You may need a hard reset if it works slowly, hangs, you want to bypass screen lock, your memory is full, and you want to erase everything, you want to sell or give your device away, and you don’t want anyone to be able to access your files or passwords.

The following instructions will show you how to completely wipe up all of your data and restore the Tecno Pop 8 to its factory-fresh condition.

Part 1: Why do I Need to Hard Reset My Tecno Pop 8?

We advise you to remove all accounts from the Tecno Pop 8 device before performing a factory reset, especially if you plan to sell, give away, or donate the 3.4. It is also a good idea to unlink the Google account. By doing this, we can prevent issues for new users as some more recent smartphones have a feature called FRP, or Factory Reset Protection, which requires the Google account or PIN number that was originally used to set up the Tecno Pop 8 when a device is factory restored.

Part 2: How to Hard Reset My Tecno Pop 8

1. Fastboot Mode

  • Shut down your phone.
  • Add a USB cord to your computer or laptop.
  • Your phone should now start up in Fastboot Mode after you press and hold the Volume Down + Power buttons for a few seconds. Tecno Pop 8 Recovery Mode and Fastboot Mode
  • Using the ADB command, start Tecno Pop 8 in Bootloader Mode or Fastboot Mode.
  • If your computer has ADB and Fastboot drivers installed, and your phone has USB debugging turned on, execute the command below after connecting it.
  • Launch Command Prompt (CMD) on your PC, then type the command listed below.

reboot bootloader using adb

  • After some time, you will see that your Tecno Pop 8 has been hard reset.

2. Hard reset with hardware key button

  • Choose “wipe data/factory reset” on your Tecno Pop 8 to do a hard reset. Scroll down with the Volume buttons, and press the Power key to agree.
  • Next, choose yes from the menu if further confirmation is required, and then click the Power button once.
  • Lastly, press the Power key and choose the Reboot system.
  • Do not forget to charge your phone.
  • Initially, turn off your phone.
  • Now Press the Volume Up + Power key for a few seconds to enter recovery mode.
  • Press and hold the Power and Volume Up buttons at the same time until the Tecno Pop 8 device vibrates. Release all the presses if the Tecno Pop 8 logo or Recovery screen shows.
  • You can give your phone up to 30 seconds to display the recovery screen.

Bonus Tips

Dr.Fone - Data Eraser (delete all data completely)

Dr.Fone - Data Eraser helps you quickly get rid of all the unwanted information and all of your data however it is always advisable to back it up using the Dr.Fone - Phone Backup.

Let’s see how you can delete completely all the data using Dr.Fone - Data Eraser. do not worry the next section is about how you can back up and restore the data before erasing it completely using Dr.Fone - Phone Backup.

Step 1: Connect your Tecno Pop 8 smartphone to your computer. Start Dr.Fone on your computer. Select “Data Eraser” from the tool list.

drfone home page

Connect your Tecno Pop 8 to the PC via a USB wire. Ensure that your phone has USB debugging turned on. You will see a pop-up window on your phone asking you to approve USB debugging.

connect to device

Step 2: Begin wiping your Tecno Pop 8 phone.

Dr.Fone will then automatically recognize and connect to your Tecno Pop 8 smartphone. To begin wiping all of your data, select “Erase All Data.”.

erase all data

Before proceeding, ensure that you have backed up any critical data because deleted data cannot be retrieved. After that, type “000000” to confirm your activity.

code to erase

Dr. Fone will next proceed to wipe the data on your Tecno Pop 8 phone. The entire procedure takes only a few minutes. Turn off the phone and do not run any phone administration programs on the PC.

erasing data

Step 3: Reset your phone’s factory data.

Once all app data, photos, and other private data have been completely erased, Dr.Fone will advise you to touch on Factory Data Reset or Erase All Data on the phone. You may use this to completely delete the phone’s settings.

erase successfully

Your Tecno Pop 8 phone has now been completely wiped, giving it the appearance of being brand new.

safe Downloadsafe & secure

Dr.Fone - Phone Backup (easy backup before a new hard reset)

Step 1: Connect your Tecno Pop 8 phone to your PC.

drfone home page

Launch Dr.Fone on your PC and choose “Phone Backup” from the list of options.

Then, connect your Tecno Pop 8 phone to the computer using a USB cord. Please ensure that the phone is in USB debugging mode. If your Tecno Pop 8 version is 4.2.2 or higher, a pop-up window on the Tecno Pop 8 phone will prompt you to accept USB Debugging. Please press the OK button.

backup and restore

To begin backing up the data on your Tecno Pop 8 phone, click Backup.

If you have previously used this application to back up your device, you may examine your backup history by clicking on “View backup history.”

Step 2: Choose which file types to back up.

After connecting the Tecno Pop 8 phone, pick the file types you wish to back up. Dr.Fone has already tested all of the file kinds for you. Then, to begin the backup process, click Backup.

file types

The backup will take a few moments. Please do not detach your Tecno Pop 8 phone, use it, or erase any data from it during the backup process.

backup completed

When the backup is finished, you can view the contents of the backup file by clicking the View the backup button.

safe Downloadsafe & secure

The Bottom Line

Now that you know how to hard reset Tecno Pop 8 it is time to implement all the possible ways and see which one works for you. We also recommend you to proceed with backing up and restoration of all the information so that you will not have to repent in the end. It is all about using smart tools like Dr.Fone - Data Eraser and Dr.Fone - Phone Backup.

Full Guide to Hard Reset Your Tecno Pop 8

Tecno Pop 8 hard reset is needed when you wish to sell your phone or give it to someone. In such situations, you must have your data removed from the phone. So, to remove the whole data with a single click, there is no better method than a hard reset. A hard reset will remove photos, videos, contacts, applications, messages, etc. Therefore, you should use a reliable source to help save your system files. In this regard, we suggest Wondershare Dr.Fone.

Dr.Fone by Wondershare is a reliable tool for all your Android needs. It can erase, recover, unlock, back up, and do other things with just a single software. Therefore, this article explains how to reset Tecno Pop 8 and use Dr.Fone. We assure you that your privacy will be safe, and no file corruption will occur while using this program.

Part 1: Some Common Causes About Tecno Pop 8 Hard Reset

Some of the most common situations that require Tecno Pop 8 Hard Reset are:

  • When you try to sell your Tecno Pop 8 phone or give it to others, you must delete your data. To do so, you must hard reset your phone.
  • Too many wrong password/pattern attempts can lock your device. Hence, a hard reset will unlock your phone in recovery mode.
  • If your device functions too slowly, a hard reset will make it faster. A hard reset will clear the cache and unwanted files, so your phone runs smoothly.
  • Lastly, an Tecno Pop 8 hard reset prevents your device from constant crashes. Therefore, if your phone has some software issue, look no further.

Part 2: Easy Ways for Your Tecno Pop 8 Hard Reset

1. Hard Reset from Settings

Step 1: Before you continue with the hard reset or factory reset on your Tecno Pop 8 smartphone. However, make sure you have a backup of the important data put away on the phone.

Step 2: If you wish to do a straightforward hard reset, head to the Settings menu and search “Erase All Data” or “Factory Reset”.

Step 3: Tap the “Erase All Data” choice and snap on “OK” once you find it.

Step 4: Approve the command in the popup window. However, ensure that your Tecno Pop 8 phone has an adequate battery to start and reset. You can put your phone on charging if the battery levels are low.

reset from settings

2. Recovery Mode

Recovery mode assists you in opening the hidden features on your Tecno Pop 8. By utilizing the Recovery mode, you can perform a hard reset on your device and wipe data. The following are the steps to get to the recovery mode on Tecno Pop 8 and complete the hard reset:

Step 1: Firstly, your Tecno Pop 8 must be turned off to perform a hard reset. Press and hold the power key on your Tecno Pop 8 smartphone for around 10 seconds to turn it off.

Step 2: Simultaneously, press and hold Power and the volume down keys until the Tecno Pop 8 logo springs up on the screen. That will raise the Recovery mode screen.

Step 3: Select your preferred language and tap on “Wipe Data”.

Step 4: You will be approached to enter the confirmation code (screen lock PIN).

Step 5: Complete the above steps and select the Format Data choice afterward.

Step 6: Click OK to finish the process, and that’s how to reset Tecno Pop 8 phone.

recovery mode

3. Dr.Fone-Data Eraser

Whether you intend to Change your phone/tablet or give them to somebody, you should delete your data. However, the physically deleted records on Android can be restored, especially with some expert tools. In light of this, the Dr.Fone Data Eraser ensures you erase information on Tecno Pop 8 permanently. It can’t be recovered using any means, including proficient tools. Here’s how:

  • Open Dr.Fone on your PC and select “Data Eraser,” among other tools.

data eraser

  • Connect your Tecno Pop 8 phone to the PC through a USB cable.

connect your Tecno Pop 8

  • Click the “Erase All Data” button to eradicate all your data.

start

  • Key in “000000” into the popup window to affirm your activity.

key in the code

  • Then, at that point, Dr.Fone will begin deleting all data on your Tecno Pop 8 phone.

erasing data

  • Then click the Factory Data Reset or Erase All Data on the phone. That will assist you with totally cleaning all the settings on the phone.

erase successful

safe Downloadsafe & secure

4. Dr.Fone-Phone Backup

Dr.Fone Phone Backup (Android) is a wonderful tool for backups and restoration that you can depend on totally. It has a backup feature that can back up a large portion of the Tecno Pop 8 files. Not just those, the backup tool can likewise recover files from your Android phone or tablet PC if you lose them unexpectedly. The method involved with backing up is quick enough. At the same time, you can select a few files to recover, which will save time. Here’s what you need to do:

  • Open Dr.Fone on your PC, and select the “Phone Backup” tool.

phone backup

  • Then, at that point, connect your Tecno Pop 8 phone to the PC through a USB cable and tap on OK.

connect your Tecno Pop 8

  • Click Backup to begin the Backup of Tecno Pop 8 phone data.
  • After the Android phone is connected, select the File types you need to back up. Of course, Dr.Fone has checked all the document types for you. Then click on Backup to begin.

file types

  • The process will require a couple of minutes.

backing up

  • After it is finished, you can tap on View the backup button to see what’s in the backup record.

safe Downloadsafe & secure

Conclusion

Above are some strategies with which you can do an Tecno Pop 8 hard reset. However, a backup is needed if you don’t want to lose your data after a reset. Therefore, in the end, we have mentioned the best tools for that purpose. You must consider these tools before going for a simple reset. Anybody can perform the last two sections (Dr.Fone tools) without issue. Therefore, we strongly suggest you download and install the Dr.Fone tool by Wondershare.


  • Title: Your Complete Guide To Reset Tecno Pop 8 | Dr.fone
  • Author: Ian
  • Created at : 2024-03-17 11:44:45
  • Updated at : 2024-03-19 12:52:49
  • Link: https://techidaily.com/your-complete-guide-to-reset-tecno-pop-8-drfone-by-drfone-reset-android-reset-android/
  • License: This work is licensed under CC BY-NC-SA 4.0.