Best Fixes For OnePlus Ace 2 Hard Reset

If you are looking for the best fixes for OnePlus Ace 2 hard reset, then you have come to the right place. In this guide, we will discuss the best ways to hard reset your OnePlus Ace 2 device. We will also provide you with some tips and tricks to help you avoid common issues that may arise during the process.

Do you want to hard reset your OnePlus Ace 2 phone? When your phone is not showing its peak performance, it can be very annoying because its working gets slower. If your phone is lagging and apps are not working properly, then there is a problem with its software. The only way to fix this problem is with a hard reset that will restore factory settings in your phone. You can do it to fix your phone or to remove all data if you want to sell it.

If you are facing some troubles with OnePlus Ace 2 hard reset, then we have the five best ways to factory reset your phone. Each method is best for certain situations, such as if you forget your password, you only want to erase data, or you want to fix software problems. We will give you simple step-by-step tutorials for each method. Although the procedure is simple, it is best to follow each step.

Using OnePlus Ace 2 Hard Reset in What Situations?

1: Erase All Data and Settings

One of the most common reasons for a hard reset is to erase all data and settings from the phone. When your phone runs out of storage, you can only delete the previous data if you want to save something new. Although OnePlus Ace 2 phones provide a lot of storage and support SD cards, you can only erase unwanted data if you run out of space. Here is the deal, you can save your data on another device like your laptop and do an OnePlus Ace 2 hard reset. This way, you can keep your previous data, make room for new data, and save time.

2: Restore Your Phone Back to Original Operating System and Apps

If your phone is working slower than usual or starts lagging, you can do a factory reset instead of wasting time figuring out the problem. Most problems in a phone come from trash file build-up and software updates. Suppose your phone doesn’t work properly after an update. In that case, you can revert it back to the original operating system by using a factory reset. You can also do it if you don’t like an update’s new features and settings. Before your OnePlus Ace 2 hard reset, make sure to backup your data on cloud storage to restore it afterward.

3: Other Situations (like selling your phone…)

Aside from the two situations discussed earlier, you might also have to hard reset your phone in other cases. Let’s say you want to buy a new phone or upgrade to a newer model. You will not use your old phone and will probably sell it. Before you sell it, you have to erase all data and personal information like passwords and accounts from your phone. In another scenario, let’s say your phone is stolen or you lost it. All you need to do is use the OnePlus Ace 2 hard reset to ensure no one can access your personal data.

1: Hard Reset from Settings (if you have password)

The easiest way to do an OnePlus Ace 2 hard reset is by using the factory reset option in the settings. This method will erase all data and settings, and you can easily do it in two easy steps. But it only works if you know the password of your phone. If you don’t know the password and the phone is unlocked, it will still require a password for confirmation. Follow these steps for a hard reset from settings.

• Open settings and tap on the “system” option.
• Tap on the “Reset Options” in the system menu.
• Tap on Erase all data or factory reset.
• Enter the Password and tap reset for confirmation.
• The system will erase all data and reboot.

2: Restore with Recovery Mode

Suppose you want to hard reset your locked OnePlus Ace 2 phone, use the recovery mode. With recovery mode, you don’t have to go to settings and erase data after providing the password. The only drawback of using recovery mode is that it is not best for beginners. Follow these steps for your OnePlus Ace 2 hard reset using recovery mode.

• Power off your mobile phone.
• Hold the volume up and power buttons.
• Enter the menu and navigate using the volume up and down buttons.
• Select Wipe data/factory reset using the power button.

3: Dr.Fone - Data Eraser (delete all data and settings)

safe & secure

If you want to hard reset your phone just to erase all its data and settings, instead of using the long factory reset method, erase data with Dr.Fone. With third-party software like Dr.Fone, you can erase anything from your mobile in one click. It helps you save time, and you don’t have to set up your phone after you are done. You can also restore the erased data using Dr.Fone as well. Here are the steps for erasing data from your mobile using Dr.Fone.

• Launch Dr.Fone on your computer, select “Data Erase”, and connect your mobile with your computer using a USB cable.

• Click on the Start button to erase the data on your mobile.

• Type the key and click on “erase now”.

• Dr.Fone will erase all types of data on your device, and you can see the progress on your computer screen.

4: Dr.Fone - Screen Unlock (when you forget password)

Most people do an OnePlus Ace 2 hard reset because they forget their screen lock or password. But it also erases all their data and settings, which is a big loss just to recover a password of their phones. Instead of doing a hard reset, you can use the Dr.Fone screen unlock feature to unlock any phone without password. You can also reset a new password without any complicated procedure. Here is the guide on how to unlock phones with Dr.Fone.

safe & secure

• Launch Dr.Fone on your computer, select “screen lock”, and use a USB cable to connect your mobile with your computer.
• Select OnePlus Ace 2 on Dr.Fone and put your phone into the specific mode.

• Dr.Fone will automatically lead your phone to enter the specific mode. After downloading, click “remove now” to open the screen lock. Then wait for the unlock process to complete.

5: Dr.Fone - System Repair (fix some software problems)

safe & secure

If your phone is lagging, or you want to fix software problems, doing a factory reset sounds a bit excessive. It might fix your phone, but you will lose all your data in return. In such cases, you can use the system recovery feature of Dr.Fone to fix any issue with your phone’s software. It can solve display problems, sound issues, heat-up issues, etc. Follow these steps to fix software issues using Dr.Fone.

• Open Dr.Fone on your computer and connect your mobile phone with a USB cable.
• Click on “System Repair” and select “Android Repair.”

• Enter the OnePlus Ace 2 device information with its name, model, and country.

• Click on Next and type the code you see on the screen.

Click here

Bottom Line

This concludes our article on five ways to hard reset OnePlus Ace 2 phones. You might be wondering which method is best for your OnePlus Ace 2 hard reset. The best way to factory reset your phone, erase all data, or unlock the screen is by using Dr.Fone. It is multipurpose software that enables users to fix various problems without doing anything. All you need to do is install Dr.Fone on your computer and connect your phone with it. Dr.Fone has various other features like WhatsApp transfer, data recovery, and device transfer.

safe & secure

5 Ways to Reset OnePlus Ace 2 Without Volume Buttons

Sometimes, there may be a necessity to reset an Android device to its factory settings. Whether you wish to sell your device to someone else or unlock your device, you will most likely have to do a hard reset. Most Android devices can be reset easily by pressing a combination of volume and power buttons. But to hard reset Android tablet without volume buttons is a different ball game altogether and perhaps a lot more cumbersome. We are here to break that myth for you!

If the Android device is working well, to hard reset Android tablet without using the volume buttons won’t be much of a problem and can be done within just a few taps. But if the OnePlus Ace 2 device is not functioning, it may pose a problem. That said, there are several methods to hard reset Android tablets without volume buttons. We have been able to list some of the easiest methods and describe them for you in the sections that follow. So read on to learn how to hard reset your Android device without volume buttons.

safe & secure

Part 1: Reset Android without volume buttons using Dr.Fone - Data Eraser (Android)

If you need to reset an Android device that doesn’t have functional volume buttons, Dr.Fone - Data Eraser (Android) can assist you in securely erasing all data and performing a reset. This software provides a reliable solution that doesn’t require volume buttons.

Before proceeding with the reset using Dr.Fone - Data Eraser (Android), carefully consider whether you still want to delete all data from your phone. Resetting will permanently erase all files, settings, and personal information on your device, and it cannot be undone. Therefore, it is important to back up any important data before performing the reset. If you are certain that you want to proceed with the reset using Dr.Fone, follow the steps below:

safe & secure

• Step 1: Download Wondershare Dr.Fone on your computer. Open the “Data Eraser” tool and connect your android device to the computer.

• Step 2: Click “Erase” to start erasing all data on the Android device. Think again about whether you want to delete all data and type “000000” to confirm.

• Step 3: Wait for the erase process to end, and you can view the erasure report to check the data type erased after erasing completes.

safe & secure

Part 2: Reset Android without volume button in recovery mode (need home button)

Resetting an Android smartphone or a tablet is not very hard, especially, if there is a home button on your device. A combination of few button presses including the home button will be the first step to the factory data resetting process. But if there are no physical volume buttons, the process may be quite different from the normal tablets. Only after booting your Android tablet into recovery mode, you will be able to hard reset Android tablet without volume buttons. To know how to reset an Android tablet without volume buttons, follow the steps described below. Remember that this method would only work if your Android device has a home button.

• Step 1: Press Power off + home button.

Press the power button until the options for Power off, Restart, and others appear. Now, tap on the “Power off” option and hold on to it while pressing the home button of your android device at the same time.

• Step 2: Confirm boot into safe mode.

Now, the screen for rebooting into safe mode will appear. Tap on “Yes” to enter the safe mode.

• Step 3: Enter recovery mode.

Press and hold the power button as well as the home button of your device simultaneously until a new screen appears. After it appears, release the two buttons and press the power button one more time. Now, press and hold down the home button. With that, you will enter into recovery mode and a new set of options will appear on the screen.

• Step 4: Navigate and do Factory Reset.

Using the home button to navigate, move down to the “Wipe data/factory reset” option. Press the power button to select the option.

You may have to confirm your choice by selecting “Yes”.

• Step 5: Reboot your device.

After the reset is complete, navigate to the “reboot system now” option and select it to reboot your device. At the end of this process, your device will be reset.

Part 3: Reset Android with the reset pinhole

There are many reasons for opting to reset an Android smartphone or tablet. Sometimes, a forgotten password might get your tablet locked. At times, the screen of your smartphone or tablet might get stuck and fail to respond. Or your device might come with a non-removable battery to make matters worse. For all these problems and many others, you might want to reset your device. But if your device does not come with a home button or volume buttons, you might want to use a different method. Generally, such devices come with a reset pinhole on the OnePlus Ace 2 device which can be used to reset the OnePlus Ace 2 device. To perform a tablet hard reset without the volume button, follow the simple steps described below.

• Step 1: Find the Reset pinhole.

Look for a very small opening on the back panel or the bezels of a smartphone. Usually, such pinholes are marked “Reset” or “Reboot” and are available on the top left side of the back panel. But be careful not to mistake it with the microphone as using it for resetting your gadget may damage the small microphone permanently and lead to other complications.

• Step 2: Insert a pin into the hole.

After locating it, insert a stretched paperclip or a small pin into the hole and press it for a few seconds.

Now all the data in your Android device will be reset. After this, you can continue to use your device normally without any problem.

Part 4: Reset Android from Settings (phone works normally)

If your Android tablet or smartphone is functioning normally, your device can be reset to the factory settings using just your device itself. Even if your device does not have a home button or volume control buttons, this method will be applicable and can be used to reset the OnePlus Ace 2 device. But before using this method to reset your Android device, make sure to back up all the necessary information that you have on your device. You can also sync all the important files to the cloud using your Google account. Also, it is necessary to keep in mind that this procedure will remove all the accounts into which your device is signed in. To know how to reset an Android tablet without volume button, read on.

• Step 1: Open the Settings app.

Tap on the Settings app in the app section of your device to open it.

• Step 2: Select the Data Reset folder.

After that, navigate or scroll down until you can find the “Backup and Reset” option. Tap on it to open the folder.

• Step 3: Tap on Factory data reset.

Now swipe down to find the “Factory data reset” option and tap on it. A new screen will appear, requesting you for confirmation to proceed with the process. Tap on “Reset device” to start the process.

At the end of the process, your device will be reset and ready to use after it completes the mandatory reboot.

Part 5: Reset Android tablet to unlock Android using Dr.Fone - Screen Unlock (Android)

If you are facing the challenge of resetting an Android tablet to unlock the lock screen, the easiest way is to use a dedicated tool. Dr.Fone - Screen Unlock (Android) is recommended in this case. It is a helpful software that provides a solution to bypass screen lock and perform a reset on your Android tablet.

Dr.Fone - Screen Unlock (Android)

The Best Tool to Reset Android and Solve Your Screen Locks

• Reset Android tablets or phones when the OnePlus Ace 2 device is locked or without a volume button.
• Bypass the FRP lock of OnePlus Ace 2 without a PIN or Google account.
• Support most mainstream Android models like OnePlus Ace 2, OnePlus Ace 2, Xiaomi, etc.
• Everyone can handle the lock screen without any tech knowledge.

3,724,689 people have downloaded it

Here are the steps about how to reset Android to unlock lock screen.

• Step 1: Launch Dr.Fone - Screen Unlock (Android) and connect your Android device.

First, install and launch Wondershare Dr.Fone on your computer. Select the “Screen Unlock” option from the main interface and then click “Android” > “Unlock Android Screen”. Using a USB cable, connect your Android tablet to the computer.

• Step 2: Select your device brand and follow the guide to restart your device.

Dr.Fone will ask you to select your device brand and display the specific way to restart the OnePlus Ace 2 device. You need to select your device brand in this step because the unlock way of different device brands is different. And then follow the instructions to restart your device.

• Step 3: The lock screen of your device is removed.

Wait for the reboot process to complete, and then you can access the phone or tablet without the password.

Conclusion

So these are the methods with which you can do a reset without using volume buttons. The difficulty level of the methods depends on the type and brand of the Android device. The first two parts can be performed easily by anyone, and that too in a matter of a few minutes. However, the third method may pose some difficulty, particularly because manufacturers set different key combinations for rebooting the OnePlus Ace 2 device into recovery. Nevertheless, once it is figured out, the rest is easy. Hence, it is up to you to decide on the method to be adopted for hard resetting your Android device.

safe & secure

What You Need To Know To Improve Your OnePlus Ace 2 Hard Reset

Are you experiencing some technical difficulties with your OnePlus Ace 2 ? Maybe your phone isn’t responding the way it should, or certain functions aren’t working like they’re supposed to. If this is the case, don’t worry - a hard reset OnePlus Ace 2 1.4 may just be what you need to get your phone back up and running. The following tutorial will show you how to “hard reset OnePlus Ace 2 “ in just a few simple steps if you have forgotten your password, pattern lock, screen lock, or PIN.

Let’s get started!

Part 1: Why should I Hard Reset My OnePlus Ace 2

If your OnePlus Ace 2 is having issues like freezing, crashing, or battery draining, a hard reset may be what you need. It will restore your phone to its factory settings, which should fix any problems.

Constant Crashes

Constant crashes can be a frustrating experience, especially if you don’t know why they’re happening. Constant crashes cause data loss and can be very disappointing. A hard reset will restore your OnePlus Ace 2 to its factory settings, which should fix the crashing issue.

Before resetting your phone, back up your data, so you don’t lose anything important.

Battery Drains Too Fast

If your OnePlus Ace 2 battery drains too fast, it may be time to reset your phone hard. A hard reset will restore your phone to its factory settings, which can help if your battery has been draining unusually quickly. Battery drains cause several problems, including shortened battery life, reduced performance, and data loss. If you’re experiencing any of these issues, a hard reset may be the best way to fix them.

Password/Pattern Forgot

You may have to perform a hard reset if you’ve forgotten your OnePlus Ace 2 phone’s password or pattern lock. It will erase all the data on your phone, so be sure to back up your contacts and other important files before you proceed.

Part 2: Best Tips to Help During Your OnePlus Ace 2 Hard Reset

Here are a few possible solutions if you are experiencing problems with your OnePlus Ace 2 and considering a OnePlus Ace 2 hard reset tool.

1. Enter Recovery Mode (When Password Forgot)

Entering Recovery Mode is an essential step to fix your OnePlus Ace 2 hard reset if it is stuck in a loop or frozen. It allows you to access the system, make changes to the settings, or delete any problematic files.

Below are the methods to boot OnePlus Ace 2 into Recovery Mode.

Step 1: Turn off your phone first.

Step 2: To connect a PC or laptop, you will need a USB cable.

Step 3: Hold the Volume Up + Power buttons for a few seconds and connect the USB Cable to the mobile. OnePlus Ace 2 Recovery Mode and Fastboot Mode will appear.

Step 4: Wait a few seconds after seeing the OnePlus Ace 2 logo before releasing the keys.

Step 5: Your phone boot into Recovery Mode in the next few seconds.

2. Google Find My Device [ Wipe All Data]

Using Google Find My Device to unlock your OnePlus Ace 2 may allow you to unlock your phone. However, this method will erase all the information on your device.

Listed below are the steps you need to follow to hard reset OnePlus Ace 2 ;

Step 1: Open https://www.google.com/android/find from another device.

Step 2: Sign in with your locked OnePlus Ace 2 smartphone’s Google account.

Step 3: You will see your locked OnePlus Ace 2 on Android Device Manager. Additionally, you can choose between Ring, Lock, and Erase.

Step 4: Click “Lock.”

Step 5: The new lock screen will appear here. To unlock your OnePlus Ace 2 , enter a password different from your Google account password.

Step 6: Confirm the new password by typing it again. This password lock will replace your current lock screen.

Step 7: You can leave the “Recovery message” field empty or type something.

Step 8: Fill out the fields for “Phone number” and “Email address.”

Step 9: Click on “Lock” after entering the password and filling out the optional field.

Step 10: You will receive a confirmation message once the unlocking process has been completed.

Step 11: Go to the “Settings” menu and navigate to the “Screen Settings” section.

Step 12: Remove the temporary password and type a new one. If you want, you can use the temporary password.

3. Dr.Fone - Phone Backup (Easy Backup Before Hard Reset)

Dr.Fone - Phone Backup (Android)

Flexibly Backup and Restore Android Data

• Selectively backup Android data to the computer with one click.
• Preview and restore the backup to any Android device.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restoration.

3,981,454 people have downloaded it

Dr.Fone - Phone Backup (Android) makes backing up your Android data simple. You can backup Android data to the computer and restore it selectively using the program.

Here’s how to backup and restore your OnePlus Ace 2 hard reset:

Step 1: Choose “Phone Backup” from the menu of Dr.Fone on your computer.

Step 2: USB cables are used to connect Android phones to computers.

Step 3: Select the file types to back up after your Android phone is connected. Dr.Fone has checked all file types by default. To begin the backup process, click Backup.

Step 4: During the backup process, don’t disconnect your Android phone, use the OnePlus Ace 2 device, or delete any data.

Step 5: To see what’s in the backup file, click View the backup button after the backup is complete.

safe & secure

4. Dr.Fone - Data Eraser (Simply And Completely Delete All Data)

The following steps will guide you through the Dr.Fone - Data Eraser of your OnePlus Ace 2 hard reset tool:

Step 1: Select “Data Eraser” from all the tools in Dr.Fone.

Step 2: You need to enable USB debugging on your Android phone before connecting it to the computer.

Step 3: To erase all your data, click the “Erase All Data” button on Dr.Fone.

Step 4: Ensure all the necessary data is backed up before proceeding since all the erased data will not be recoverable. Confirm your operation by typing “000000”.

Step 5: Dr. Fone only takes a few minutes to erase all data from your Android phone. Keep the phone connected, and don’t open any phone management software.

Step 6: You will be asked to tap Factory Data Reset or Erase All Data after all app data, photos, and other private data have been completely erased. There will be a complete wipe of your phone.

Step 7: After wiping your Android phone, it’s like it’s brand new.

safe & secure

The Bottom Line

These are all methods for unlocking OnePlus Ace 2 hard reset. It is possible to apply each technique if you have forgotten the password of your OnePlus Ace 2 . You should use Dr.Fone - Phone Backup and Data Eraser to prevent data loss. It is possible, however, to try another method until you have unlocked your phone completely if one fails.

Also read: