Why Stellar Data Recovery for iPhone takes time in scanning my iPhone?

Stellar Data Recovery for iPhone thoroughly scans your iOS device, computer, and iCloud to retrieve every bit of data. However, the scanning time of the software depends upon the following:

• The amount of data in your iOS device: Greater the amount of data on your iPhone more time it will take to scan.
• The size of RAM on your iPhone: Greater the RAM more will be the scanning time. For instance, the software will take more time to thoroughly scan an iPhone 12 with 6GB RAM compared to iPhone 11 that has 4GB RAM.
• RAM of your computer: The recommended system requirement of Stellar Data Recovery for iPhone is 8GB. Although it can scan and recover from 4GB RAM computer, but you may experience slow speed.

iPhone Data Recovery – An Infographic to Conquer iPhone Data Loss

DID YOU KNOW?

• More than 70% of people choose to upgrade to iOS 16 within a few days of release
• Analysis shows that about 20,000+ users experience data loss due to update failures and other related problems

TOP 5 CAUSES OF DATA LOSS

• iOS Update
• Accidental Deletion of Data
• Jailbreak failure
• iOS Restore
• Hardware or System Malfunction

WHAT ABOUT RECOVERING iOS DATA AFTER DATA LOSS?

iPhone Data Recovery  software helps you in such situations. Data exists in the internal memory of your iPhone even after deletion until it is overwritten by new data. Its advanced algorithm and internal underlying technology helps recover all deleted data from your iOS device, be it your iPhone or your iPad.

 WHAT YOU CAN RECOVER?

1. Recovers Deleted Photos from your iPhone – In just 3 steps you can recover your memorable photos from Camera Roll, Voice Memo, Photo Stream, etc.
2. Recovers deleted text messages from your iPhone – It not only recovers your text messages but also recovers your WhatsApp messages along with its attachments
3. Recovers deleted contacts from your iPhone – It retrieves your lost or deleted contacts from your iPhone, iTunes, or iCloud backup files
4. Recovers Safari Bookmarks – It easily recovers bookmarks from the Safari browser which you may have deleted accidentally
5. Recovers deleted data from iCloud backup files – It also recovers and restores data from your damaged iPhone through iCloud backup files
6. Recovers deleted data from encrypted iTunes backup files – In case any of your backup files gets accidentally deleted, the software enables you to access the data by removing encryption.

Solved: Mac Doesn’t Recognize my iPhone

Summary: Is your Mac not recognizing the iPhone? Learn the 9 ways to fix iPhone not showing up on Mac. You can apply these methods for all iPhone models not recognized by macOS Ventura, Monterey, Catalina, Big Sur, High Sierra and below versions.

You may want to backup iPhone data or transfer favorite photos, music, or videos to Mac. But sometimes your Mac computer doesn’t detect the iPhone when you try to connect it. There are so many complaints such as iPhone not showing up in Finder in Ventura, Monterey, Catalina or Macbook not recognizing iPhone 14. Some also reported an unknown error or a 0xE error when trying to connect iPhone to Mac computer. The situation is frustrating as it prevents you to sync iPhone to macOS and access iPhone data on Mac.

No worries. There are methods, which can fix the issue and let you again access your iPhone on Mac. But, first you should be aware why Mac fails to recognize your iPhone as this helps in troubleshooting the problem.

Why your iPhone not detected by Mac computer?

Mac does not detect your iPhone due to many reasons, such as

• iPhone is not ‘on’ when connected to Mac.
• iPhone is damaged.
• The USB cable or USB port is not working.
• Software updates are pending including iOS, iTunes, and macOS.
• Third-party software conflict wherein 2 programs arecompeting for the same memory, peripheral device etc., on your Mac.
• Firewall or Antivirus software is preventing Mac to recognize iPhone.
• Mac settings don’t allow to view iPhone in Finder.

1. Check your iPhone

Before you connect your iPhone to Mac, make sure the iOS device is unlocked and on the Home screen.

2. Fix USB connection

When Mac computer doesn’t recognize iPhone, first check your USB connection. The USB cable or the port can be faulty. Try to connect iPhone to Mac using another Apple USB 2.0 cable. If that doesn’t work try with the different port. Plus, disconnect other USB devices from Mac except your iPhone.

3. Restart your iPhone

Restarting the iOS device would resolve any issue between your iPhone programs and iTunes. To restart hold volume/side/ top button depending on your iPhone model. Slide the red power off slider on your iPhone. Wait for your iPhone to turn off. After a few seconds, again restart iPhone. Now Mac should recognize your iPhone.

4. Restart your Mac

Restarting Mac clears the cache and memory of your system giving it a fresh start. It also installs pending updates.

5. Update your macOS

When iPhone is not showing up on Mac Finder but you can see it under USB Device Tree, update the macOS to the latest version. Make sure there are no pending software installs.

To check the USB Device Tree on Mac follow the below steps:

• Click on Apple icon followed by About This Mac.
• Click the System Report button.
• Under Hardware, select USB.

_{Figure: USB Device Tree}

• On the right pane, you will see USB Device Tree. If you see your iPhone in the list, then update to the latest macOS.

6. Update iTunes

Older versions of iTunes can create conflict with normal Mac functions. Hence, Apple recommends installing the latest iTunes updates.

To install the latest iTunes, open iTunes. From the menu bar choose Help > Check for Updates and follow the prompts to install the latest version.

Now, check if your Mac recognizes the iPhone or not.

7. Disable antivirus on Mac

One of the reason cited for iPhone not detected by Mac is anti-virus or firewall protection on your system. So disable the antivirus or firewall and then try to connect your iPhone to Mac.

8. Enable iOS device in Mac Preferences

When iPhone is not showing on Mac Finder, check if your Mac Preferences allows to view iOS devices in Finder. To enable iOS device in Finder follow the below steps:

• Go to Finder > Preferences.
• Click on the Sidebar button in Finder Preferences box.
• Check in CDs, DVDs and iOS Devices.

_{Figure: Finder Preferences}

This should fix iPhone not showing up in Finder on Mac.

9. Connect iPhone to a different Mac machine

Try by connecting your iPhone to another Mac. If you receive a message asking to ‘Trust this computer’, click on ‘Trust’ to access your iPhone data on the new computer. Make sure to backup iPhone to avoid data loss situation.

Tip: Have you lost or accidentally deleted Camera Roll, Contacts, Photos Stream, Voice Memos, or more while transferring iPhone data to Mac? No need to worry. Restore the deleted photos, videos, messages, contacts, etc., with the help of an efficient Stellar Data Recovery for iPhone for Mac.

FAQ

1. Can I connect iPhone with Mac wirelessly?

You can sync your Mac and iPhone over the same Wi-Fi network.

1. Connect your iPhone to Mac using a USB cable.
2. Open Finder on Mac and select your iPhone in the sidebar.
3. Click on the General tab.
4. Check in Show this iPhone when on Wi-Fi.
5. Click Apply.

2. How to fix my iPhone cannot connect to iTunes?

If iPhone is not showing up in iTunes, restart your devices and ensure macOS, iTunes, and iOS are updated. To know more methods, read How fix iPhone unable to connect to iTunes problem.

3. How to connect iPhone to the latest MacBook Pro 2021 that doesn’t have USB A port?

The new MacBook has USB Type-C port. You can use USB-C to Lightning cable to connect iPhone XR, SE, 11, and above to the new MacBook. If you have iPhone X or below use USB-A to Lightning cable.

4. Can I use the methods to fix iPhone 14 not recognized by macOS Ventura?

Yes, you can apply the above methods to fix any iPhone not detected by macOS Ventura, Monterey, Big Sur, Catalina, or below.

5. Will I lose any data when syncing iPhone and Mac?

No, you won’t lose data by syncing iPhone to Mac. Syncing helps to access your iPhone data on Mac anytime from anywhere. However, if you accidentally delete iPhone data, use an iPhone Data Recovery software to restore it.

Wrapping Up

Syncing iOS device to macOS has so many advantages but if Mac is not recognizing your iPhone, you cannot transfer, back up, or access iPhone data on Mac. This post has shared 9 methods to fix the syncing issue of Mac and iPhone. One of them should resolve Mac not detecting your iPhone.

How to Put iPhone or iPad on Recovery mode? (Step by Step Tutorial)

Summary: DFU or Recovery mode is a way to recover your iPhone or iPad using a computer in case of technical issues. Read this post for a step-by-step process of how to enter and exit Recovery Mode and DFU mode on iPhone.

When you run out of solutions to troubleshoot your iPhone, Recovery Mode or DFU Mode comes as a rescue. Whether iPhone stops booting or fails to restore, you can use the functions in iPhone and fix the issue.

But the method to bring an iPhone in DFU or Recovery Mode varies in each iPhone model and iPad.

This post will guide you on how to enter and exit Recovery and DFU Modes in different iPhone and iPad variants. But first, understand what these iPhone functions are and their uses.

What is Recovery Mode and its use?

Recovery Mode uses iBoot to upgrade or restore your iPhone. iBoot is a bootloader program for iOS devices. Recovery Mode helps install the same or above iOS firmware version already on your iPhone. The iPhone screen in Recovery Mode prompts to connect iPhone to iTunes, showing a computer image.

Recovery Mode helps fix iPhone updates or restore issues, such as iPhone stuck at the Apple logo , unable to open the locked iPhone or want to reset iPhone but forgot iPhone passcode .

What is DFU Mode and its use?

Device Firmware Update or DFU mode lets your iPhone connect with iTunes on the computer without iBoot. As DFU mode doesn’t use iBoot, you can make changes in the operating system of the iOS device. An iPhone in DFU mode has a completely black screen.

Putting iPhone into DFU mode is the solution when Recovery Mode doesn’t resolve the problem. DFU mode can restore or upgrade iPhone. This mode is also commonly used to downgrade or jailbreak iPhone s.

Caution — you may lose all your iPhone data!

If you are entering DFU mode, make sure to back up your iPhone data . DFU mode permanently erases iPhone data . So always back up your videos, photos, messages, chats, Notes, etc., either to iCloud or iTunes.

However, if you have lost iPhone data and don’t have a backup, then immediately download iPhone data recovery software — Stellar Data Recovery for iPhone . The software helps to restore lost or deleted iPhone contacts, call logs, photos, videos, text, FaceTime, audio, chats, Calendar, Notes, Safari bookmarks, etc. It is quick to recover and extremely user-friendly.

What is required to perform Recovery and DFU modes in iPhone?

1. Windows or Mac system.
2. Lightning to USB cable.
3. iTunes updated to the latest version on your computer.

How to put iPhone 6 and earlier versions in Recovery Mode
Follow the below steps to enter Recovery Mode on iPhone 6, iPhone 6s, iPhone 6s Plus, iPhone 5s, iPhone 5, iPhone 4s, and iPhone 4.

• Connect your iPhone to your PC using USB Lightning Cable and launch iTunes.
• Press and hold down the Home and Power button to turn the iPhone.

• Then connect the USB cable to iPhone and turn it on by holding the Home button.
• Continue to hold the Home button until a pop-up appears informing ‘an iPhone has been detected in recovery mode’ on your system.
• In Recovery mode, you can either restore the iPhone, set it up as new, or just recover your backups.

How to put iPhone 7 in Recovery Mode
It’s easy to enter Recovery Mode on iPhone 7 or iPhone 7 Plus. Follow the below steps:

• Turn off your iPhone 7 and connect it to your Mac or Windows computer.
• Ensure iTunes or Finder is running on the system.
• Press and hold the Power and Volume down button for 10 seconds.
• While continuing to hold the Volume down button, release the Power button.

• Release the button if you see the iTunes has detected an iPhone in recovery mode message on your system.

How to put iPhone 8 in Recovery Mode
If you want to enter the Recovery Mode on iPhone 8 and its variants, follow the below steps:

• Connect your iPhone 8 to your Mac or Windows system with a USB cable.
• Next, press and release the following buttons in a sequence Volume Up button, Volume Down, and Side button until your device reboots. Continue holding the Side button, even after seeing the Apple logo appear.
• Release the Side button once the Connect to iTunes logo appears on the iPhone’s display.

Click here

• Launch iTunes, and you should see a message stating, “There is a problem with the iPhone that requires it to be updated or restored.” You can choose to Update or Restore your iPhone’s software.

How to put iPhone 11 into Recovery Mode
To enter Recovery Mode on iPhone 11, iPhone 11 Pro, or iPhone 11 Pro Max, follow these steps:

• Connect your iPhone with your Mac or PC and launch iTunes.
• Force restart your iPhone with the following steps:
  • Press and release the Volume Up button.
  • Press and release the Volume Down button.
  • Press and hold the Side button.
• Make sure to release these buttons if you see the recovery mode screen with the “Connect to iTunes” screen.
• Then choose your iPhone in iTunes, and you will see a pop-up saying that your iPhone is in Recovery Mode. Here, you can either update or restore your iPhone.

How to put iPhone 12 into Recovery Mode
Follow the below steps to enter Recovery Mode on iPhone 12, iPhone 12 mini, iPhone 12 Pro, and iPhone 12 Pro Max:

• Update iTunes to the latest version.
• Connect your iPhone to your PC or Mac via Lightning to a USB cable.
• Note: If you are connecting your iPhone to the computer for the first time, click on ‘Trust’ in the Trust This Computer dialog box and follow the prompts.
• Once your iPhone is paired with the computer, press the Volume up button followed by the Volume down button and release.
• Press and continue to hold the Side button until you see the ‘Connect to computer’ screen on your iPhone. While on your computer, you would see the iPhone Recovery Mode message in iTunes, confirming that your iPhone has entered into Recovery Mode. The computer asks you to either Update or Restore your iPhone**.** Click on any based on your requirement.

If you choose Update, iTunes will update your iPhone 12 to the latest iOS release. This won’t lead to any loss of data.

If you select Restore: It will erase iPhone data completely and renew your entire iPhone.

How to put Recovery Mode on iPhone 13
Entering Recovery Mode on iPhone 13 and iPhone 13 Pro has the same steps as iPhone 12. To enter the Recovery Mode, connect your iPhone to your computer and do the following steps in quick succession.

• Press the Volume up button and release.
• Press the Volume down button and release.
• Press and continue to hold the side button until the ‘Connect to iTunes’ screen appears on iPhone.

How to put Recovery Mode on iPhone 14
To use recovery mode on iPhone 14 and iPhone 14 Pro, follows these steps:

1. Connect your iPhone to your system with a Lightning cable.
2. Now on iPhone, press and quickly release the Volume up, Volume down, and side buttons until you see the recovery mode screen.
3. Select your iPhone in the Finder/iTunes window and choose to update or restore your iPhone.

How to exit Recovery Mode on iPhone
It’s easy to exit Recovery Mode on iPhone. Follow the below steps:

• Hold the Home button and Lock button to exit DFU mode on iPhone 6 and earlier versions until your device reboots.
• To exit DFU mode on iPhone 7/7 Plus, hold the Side and Volume Down buttons until the device reboots.
• To exit the Recovery Mode on iPhone 8 or later version, press and hold the Side button until the “Connect to iTunes” screen disappears, and then iPhone should reboot back into iOS.

How to put Recovery Mode on iPad
To enter Recovery Mode on the iPad, follow these steps:

• Connect your iPad to Windows or Mac system using a USB cable.
• For iPad with a Home button: Press and hold the Home button and the Top/Side button until your iPad enters recovery mode.
• For iPad without a Home button: Quickly press and release the Volume Up button, Volume Down button, and the Top button. Keep holding the Top button until the iPad enters recovery mode.

How to put iPhone into DFU mode ?
Follow the below steps to enter DFU Mode on iPhone and its various version:

1. Connect iPhone to PC or Mac via USB cable. Note: If the ‘Trust This Computer’ dialog box appears, follow the prompts.
2. Once your iPhone is paired with a computer, follow these steps:

How to Enter DFU Mode on an iPhone 8 and later versions

• Press the Volume up button, then Volume down button, and release.
• Quickly press and hold the Side button for about 5 seconds.
• Along with the Side button, press and hold the Volume down button.
• Release the Side button and continue to hold the Volume down button for about 10 seconds.
• Once you see the ‘Recovery Mode’ screen in iTunes on your computer, you have successfully entered the DFU mode. However, the iPhone screen remains black in DFU Mode.

How to Enter DFU Mode on an iPhone 7

• Press and hold the Power and the Volume down buttons for 8–10 seconds.
• Release the Power button and continue to hold the Volume down button.
• Release the Volume down button once your iPhone has entered recovery mode.

How to Enter DFU Mode on an iPhone 6S or Earlier Versions

• Press and hold the Power/Sleep and Home buttons together for 10 seconds.
• Release the Power/Sleep button, but continue holding the Home button.
• Release the Home button once you see iTunes/Finder has detected an iPhone in recovery mode message.

Note: If you see the Apple logo on your iPhone, try again and repeat the above steps carefully.

How to exit DFU Mode on iPhone ?
If you want to exit DFU Mode on iPhone and its variants, follow the below steps:

How to Exit DFU Mode on an iPhone 8 or Later versions

1. Press the Volume Up button and quickly release.
2. Press the Volume Down button and quickly release.
3. Now, press and hold the Side button until the Apple logo appears on iPhone. This indicates your iPhone has exited DFU Mode. Your iPhone would boot to the ‘Lock’ screen in a few seconds. Now, enter your passcode and continue to use your iPhone.

How to Exit DFU Mode on an iPhone 7
Press and hold the Power or Sleep button and the Volume down button until you see the Apple Logo.

How to Exit DFU Mode on iPhone 6 or Earlier versions
Hold the Home button and the Power button of the iPhone simultaneously until Apple’s logo appears on the screen.

Conclusion

Whenever your iPhone and its variants show problems like being stuck at the Apple logo, won’t upgrade, restore, or respond, you can use Recovery Mode and DFU Mode functions to resolve the problem. But don’t forget to back up your iPhone data before using these functions.

However, in any unfortunate incident of data loss while performing the functions, trust Stellar Data Recovery for iPhone – a software that brings back lost data on your iPhone securely.

FAQ

1. Does DFU Mode delete iPhone data?

If you use DFU mode to install something or restore your device, all your iPhone’s data will be erased.

2. Can you enter the recovery mode if your iPhone is disabled?

An iPhone is disabled when a user enters an incorrect password too many times on the lock screen. You should be able to enter the recovery mode using the same steps mentioned above and restore your iPhone to regain access.

3. How to put the iPhone in recovery mode without a computer?

A computer is not necessary to enter the recovery mode on an iPhone. You only need to press the right buttons, depending on your iPhone model, to enter the recovery mode. However, to restore your iPhone – you will need a computer.

Also read: