3 Solutions to Hard Reset Tecno Spark 10 Pro Phone Using PC

Find here 3 easy ways to hard reset Android using ADK or Android Device Manager from your PC. Also, do not forget to back up Android to PC before starting.

There are several cases when someone wants to know about how to hard reset an Android phone using PC. Such cases usually arise when your device is not accessible or stolen. It also involves situations when you forget the password or the unlock pattern of your device, or maybe your phone has frozen and is non-responsive. In such situations, it is very important to know how to reset Android phones to factory settings from the computer.

Factory reset will delete all your user data from internal storage. Thus it is also very important to back up all your internal data of the Tecno Spark 10 Pro device before you hard reset Android via PC. Moreover, a hard reset should be your last option at hand to revive your Android device. Hence, in this article for all the users out there, we have picked up the solution on how to factory reset Android Phone using PC.

You must ensure that all the steps are followed in sync so that the hard reset Android via PC is successful.

Part 1: Back up Android before hard reset

Since factory reset involves removing all data, adjusted settings and logged accounts from the Tecno Spark 10 Pro device; therefore, it is very important to back up all the data before moving on with the factory reset process. So, in this section, we will show you how to first back up your Android device using the Phone Backup . This is an easy-to-use and very convenient Android backup software that can be used to back up an Android device.

Wondershare Dr.Fone

Flexiblely Back up and Restore Android Data

• Back up Android data to the computer with one click.
• Preview and restore the backup to any Android device or iOS device.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restoration.

3,981,454 people have downloaded it

Let’s have a look at the easy process to back up Android before the factory reset it.

Step 1: After installation completes, connect your Android device via data cable and go to “My Backup”. Then, this tool will automatically detect your device.

Step 2: You can now see the file types that will be backed up, such as Contacts, Messages, Calendars, Videos, etc.

Step 3: Click on “Backup pow”  to proceed with the process. The backup process will start, keeping connected the Tecno Spark 10 Pro device during the phone backup process.

Step 4: Within a few minutes, your whole device will be backed up. You can click “View Backups” to view all data that is backed up.

Phone Backup is one of the handiest and easy-to-use features within Wondershare Dr.Fone. Users can select their opted files manually to restore. This tool supports 8000+ Android devices worldwide. Users will feel safe and secure using this revolutionary software.

safe & secure

Part 2: Hard Reset Android using Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) is a user-friendly software tool that helps you unlock your Android device if you forget the passcode, pattern lock, PIN, or face/fingerprint lock. It supports various Android devices, allows you to bypass lock screens without data loss, and provides step-by-step instructions for easy unlocking. It also helps with FRP unlock and works on both Windows and Mac systems.

Step 1: Launch Dr.Fone - Screen Unlock on your computer and select “Screen Unlock” from the main interface. After that , you need to connect your Android phone to the computer using a USB cable.

Step 2: Choose “Android” > click “Unlock Android Screen” if you want to remove the lock screen. Choose your device brand. The hard reset methods vary for different device brands, so make sure that you choose the correct device brand.

Step 3: Put the Android phone into Specific mode with the help of Dr.Fone. And then, Dr.Fone will factory reset your Android phone within a few minutes. Now you can access your Android phone without a password!

safe & secure

In this process, we will learn how to hard reset Android phone to factory settings from a computer using SDK. This involves removing all data from the Tecno Spark 10 Pro device using a PC.

Follow the given steps to know how to hard reset an Android phone using PC.

Pre-Requirements

• PC that runs on Windows (Linux/Mac installer is also available)

• You have to download Android ADB tools on your computer. Android ADB Download: https://developer.android.com/studio
• A USB Cable to connect your Tecno Spark 10 Pro with your computer.

Steps to hard reset Android using SDK

Step 1: Enable USB Debugging in the Android settings. Open Settings>Developer options>USB Debugging. If developer options can’t be found on the Tecno Spark 10 Pro device, then please go to Settings > General > About phone > Common > Software info (tap on it 5-8 times).

Step 2: Install Android SDK Tools. Ensure that Platform-tools and USB drivers are selected in the SDK manager window.

Step 3: Ensure that the drivers for your Android are installed on your PC or at least the Generic drivers are present

Step 4: Connect the Tecno Spark 10 Pro device to the PC using a USB cable. Ensure that the Tecno Spark 10 Pro device is recognized in the Windows Device Manager.

Step 5: Open the command prompt in Windows and go to C:\Users\Your username\AppData\Local\Android\android-sdk\platform-tools

Step 6: Type ADB reboot recovery and the Tecno Spark 10 Pro device will restart. The recovery menu must appear after this

Step 7: The device can be disconnected now. Now, you can remove the password or simply Factory Reset the Tecno Spark 10 Pro device.

Now, you have successfully reset your device using a PC.

Although the first process is the easiest, in certain cases, you might have to look for other options too. Kindly follow the steps thoroughly and format your device with ease.

Part 4: Hard reset Android using Android Device Manager (Find My Device)

When someone loses their phone, or it is stolen, the two questions that commonly arise are: how to locate the phone? And if it is not possible, how to remotely wipe the phone’s data? People can use the Android Device Manager (also referred to as “Find My Device”) and do the exact two things. The best thing about this is that it doesn’t need to be installed as it is inbuilt on all Android Devices.

Let us look at the following steps to know how to reset Android phones to factory settings from the computer.

Requirements for Android Device Manager to Work:

• It must be activated in the Tecno Spark 10 Pro device administrator settings. Go to settings > Security > Device administrators and check whether ADM is enabled as a device administrator or not.
• The location of the Tecno Spark 10 Pro device must be ON
• The device must be signed in to a Google account
• The device must have an active internet connection
• The device should not be switched off
• Even if the Tecno Spark 10 Pro device is without SIM, the Google account must be active

Steps to use ADM to wipe or locate any Android Device:

Step 1: Directly go to the Android Device Manager website , and log in to your account. You will get three options: “Play Sound”, “Secure Device” and “Erase Device”.

Step 2: Click on the “Play Sound” option will make it raise the alarm, notifying of the location, you can easily locate your Android phone if it is nearby.

Step 3: Click “Secure Device”, you can remotely lock your device with a new passcode, display a custom message on the lock screen, and even track the Tecno Spark 10 Pro device’s location in real-time. It also gives you the option to add a contact number, so anyone who finds your device can reach out to you.

Step 4: Select “Erase Device” to reset your device. Once you select this option, the interface will take over and complete the job. Congratulations! You have successfully used the Android Device Manager (ADM) to reset your Android smartphone.

The Bottom Line

So these were the third different methods through which you can hard reset your Android device. Resetting the Tecno Spark 10 Pro device involves removing every data from the Tecno Spark 10 Pro device. The phone gets back to the same state as it was out of the box. Hence, most importantly, do not forget to back up data using Phone Backup and restore beforehand so that you do not end up losing anything important.

How to Reset a Tecno Spark 10 Pro Phone That Is Locked

“Looking for the best solutions on how to factory reset Tecno Spark 10 Pro phone when locked?”

The need to reset a Tecno Spark 10 Pro phone arises in several situations like forgetting the password, PIN, or pattern, purchasing a second-hand device that is locked, accidentally changing the password or setting a wrong one, and others. In all these and other similar situations, you would need to reset your Tecno Spark 10 Pro phone and this can be done using different methods and tools.

In this article, we will discuss all these methods that can help you reset your device so that it can be accessed without any hassles.

Part 1: Things You Should Be Aware of Before Resetting Tecno Spark 10 Pro Phones

Before you start resetting your Tecno Spark 10 Pro device through any of the methods, there are certain important things that should be considered and taken care of. Check them out as below.

• First of all, ensure that your Tecno Spark 10 Pro phone is charged so that the battery does not go off in between and stop the ongoing process.
• Ensure to clear the cache on your Tecno Spark 10 Pro phone.
• If your Tecno Spark 10 Pro phone is not locked, make sure to take the backup of the Tecno Spark 10 Pro device to prevent accidental loss of data. If the Tecno Spark 10 Pro device is locked, ensure that from next time you keep taking the backup on regular basis.

Part 2: How to Reset Tecno Spark 10 Pro Phone When Locked?

Once you have fulfilled the above mention pre-requisites, next comes the process of device resetting. If your Tecno Spark 10 Pro phone is locked, there are different methods that can help you reset your device and the popular ones can be checked as below.

Method 1: Reset Tecno Spark 10 Pro using Google’s Android Device Manager

The Android Device Manager which is also known as Find My Phone is an excellent feature that is majorly used for locating the lost or the stolen phone. This feature also allows the users to unlock and reset their devices. The Android Device Manager can only function if you know the Google ID and password that was used for device initialization. The feature can be used to erase the Tecno Spark 10 Pro device data and reset it.

Steps to reset Tecno Spark 10 Pro phone using Google Android Device Manager

• Step 1. On your PC browser, using your Google account, sign in to the Google Find My Device.
• Step 2. The list of devices will appear on the screen, from which you need to choose the Tecno Spark 10 Pro phone that you want to unlock and reset.
• Step 3. Now, from the available options, click on ERASE DEVICE.
• Step 4. Again, tap on ERASE DEVICE, and to continue you need to log in to your Google account.

With the completion of the above steps, your Tecno Spark 10 Pro phone will reset.

Method 2: Perform a Hard Reset on Tecno Spark 10 Pro with Hardware Keys

Hard reset which is also termed factory reset is a feature that will reset all the Tecno Spark 10 Pro device settings and bring them to the factory setting status. While you perform the hard reset, all the data of your phone as well as the installed apps will also be deleted.

Steps to hard reset Tecno Spark 10 Pro Phone

• Step 1. Using the Power button, turn off your Tecno Spark 10 Pro phone.
• Step 2. Press and hold the Volume Up and Power button together for a few seconds.
• Step 3. In some time, the Recovery mode will load on the screen. From the menu, choose to Wipe data/factory reset using the Volume Up/Down buttons and the selected option can be confirmed using the Power button.
• Step 4. At the space provided, enter the word Yes and then click on the Wipe data/factory reset button.
• Step 5. Again, to confirm the hard reset, click on the Wipe data/factory reset button.
• Step 6. The process of hard resetting will start and when completed, click on Reboot system now for restarting the unlocked phone.

Note: After the hard reset, Google Account Verification, FRP screen will appear where you need to enter the correct Google account or PIN that was previously synced with the Tecno Spark 10 Pro device. If you know the Google credentials, it’s great, but in case you have forgotten then no need to worry as there are Tecno Spark 10 Pro FRP bypass tools available as well as Tecno Spark 10 Pro codes that can be used to bypass the FRP lock.

Method 3: An Efficient Alternative to Reset Locked Tecno Spark 10 Pro Phone

If the above-listed methods do not work for any reason, we recommend using Dr.Fone-Screen Unlock (Android) as the best alternative. This is a Windows and Mac-based tool that can help bypass and remove all types of screen locks including PIN, passcode, pattern, Face ID as well as a fingerprint. The software not only works with Tecno Spark 10 Pro but all other popular Android devices including Tecno Spark 10 Pro, LG, Oppo, and more.

safe & secure

The screen locks can be removed without rooting, and the software is completely safe to use.

Dr.Fone - Screen Unlock (Android)

The Best Tool for factory reset Tecno Spark 10 Pro Phone When Locked

• Work perfectly to reset your Tecno Spark 10 Pro without a password.
• It’s the only solution available that works with both Windows and Mac to help you regain access to your device easily.
• Everybody can handle it without any technical background.
• Except for resetting, it also unlocks the locked Tecno Spark 10 Pro if you are using a PIN, fingerprint, or other screen locks.

4,464,992 people have downloaded it

Steps on how to factory reset Tecno Spark 10 Pro phone without password using Dr. Fone - Screen Unlock

• Step 1. Download, install and launch the Dr.Fone software on your PC and from the main menu choose the Screen Unlock feature.
• Step 2. Next, your Tecno Spark 10 Pro phone needs to be connected to the system using a USB cable, and then from the interface select Unlock Android Screen option.

• Step 3. In the next step, select your Tecno Spark 10 Pro phone’s brand from the supported list in Dr.Fone to ensure it enters the correct specific mode.

• Step 4. Dr.Fone will begin unlocking the Android screen once it enters the specific mode. Please wait for the unlock process to finish.

Part 3. How to Reset Tecno Spark 10 Pro Phone at Normal Cases?

In normal situations, the Tecno Spark 10 Pro phones can be reset using the settings menu or the Android Factory Reset code. Both these methods and their guide to getting the process done are listed below.

Method 1: Reset Tecno Spark 10 Pro phones through the Phone Settings menu

To unlock the screen and reset your Tecno Spark 10 Pro phone, the settings menu of the Tecno Spark 10 Pro device can be used. For this method, you do not need to make your device enter the recovery mode. The steps for the process are as follows.

• Step 1. On your Tecno Spark 10 Pro phone, open the Settings app and look for the Backup and Reset option from the Personalization section.
• Step 2. Next, select Factory Data Reset Option.
• Step 3. Go through the on-screen details and then click on the Reset device button.

The steps above will reset your phone to the default factory settings.

Method 2: Reset Tecno Spark 10 Pro phones with factory reset code

There are Android Reset Codes for different brands of phones that can be used for resetting the Tecno Spark 10 Pro device. These secret codes can be different phones as well as OS versions. In general, the code used for resetting Tecno Spark 10 Pro phones is *#*#2846579#*#*.

Steps to reset Tecno Spark 10 Pro phone using secret reset code

• Step 1. On your Tecno Spark 10 Pro phone, go to the dialer and type the code- *#*#2846579#*#*.
• Step 2. From the menu, click on the Restore Factory option.
• Step 3. Finally, to confirm the resetting of the Tecno Spark 10 Pro device, click on the OK button.

The above methods can also be tried if you get stuck in a situation on how to factory reset Tecno Spark 10 Pro tablets without password. Also, we recently covered a method of how to bypass the Google account on Tecno Spark 10 Pro after a factory reset, we have now had the opportunity to test this with many people with different models of Android and have found mixed results.

Conclusion

The above given are multiple options that can be used for resetting your Tecno Spark 10 Pro phone when you forget your device unlock password. Some of these solutions can be used for free and if they work, nothing like that. Dr.Fone – Screen Unlock (Android) is one of the best methods to reset your Tecno Spark 10 Pro device as it supports removing all types of screen locks in a hassle-free manner.

safe & secure

Is your Tecno Spark 10 Pro working too slow? Here’s how you can hard reset it

If Tecno Spark 10 Pro 3.4 hard reset or Tecno Spark 10 Pro hard reset is the only option for your mobile phone, you can perform a factory reset to make your device function as it did on the first day. You may need a hard reset if it works slowly, hangs, you want to bypass screen lock, your memory is full, and you want to erase everything, you want to sell or give your device away, and you don’t want anyone to be able to access your files or passwords.

The following instructions will show you how to completely wipe up all of your data and restore the Tecno Spark 10 Pro to its factory-fresh condition.

Part 1: Why do I Need to Hard Reset My Tecno Spark 10 Pro?

We advise you to remove all accounts from the Tecno Spark 10 Pro device before performing a factory reset, especially if you plan to sell, give away, or donate the 3.4. It is also a good idea to unlink the Google account. By doing this, we can prevent issues for new users as some more recent smartphones have a feature called FRP, or Factory Reset Protection, which requires the Google account or PIN number that was originally used to set up the Tecno Spark 10 Pro when a device is factory restored.

Part 2: How to Hard Reset My Tecno Spark 10 Pro

1. Fastboot Mode

• Shut down your phone.
• Add a USB cord to your computer or laptop.
• Your phone should now start up in Fastboot Mode after you press and hold the Volume Down + Power buttons for a few seconds. Tecno Spark 10 Pro Recovery Mode and Fastboot Mode
• Using the ADB command, start Tecno Spark 10 Pro in Bootloader Mode or Fastboot Mode.
• If your computer has ADB and Fastboot drivers installed, and your phone has USB debugging turned on, execute the command below after connecting it.
• Launch Command Prompt (CMD) on your PC, then type the command listed below.

reboot bootloader using adb

• After some time, you will see that your Tecno Spark 10 Pro has been hard reset.

2. Hard reset with hardware key button

• Choose “wipe data/factory reset” on your Tecno Spark 10 Pro to do a hard reset. Scroll down with the Volume buttons, and press the Power key to agree.
• Next, choose yes from the menu if further confirmation is required, and then click the Power button once.
• Lastly, press the Power key and choose the Reboot system.
• Do not forget to charge your phone.
• Initially, turn off your phone.
• Now Press the Volume Up + Power key for a few seconds to enter recovery mode.
• Press and hold the Power and Volume Up buttons at the same time until the Tecno Spark 10 Pro device vibrates. Release all the presses if the Tecno Spark 10 Pro logo or Recovery screen shows.
• You can give your phone up to 30 seconds to display the recovery screen.

Bonus Tips

Dr.Fone - Data Eraser (delete all data completely)

Dr.Fone - Data Eraser helps you quickly get rid of all the unwanted information and all of your data however it is always advisable to back it up using the Dr.Fone - Phone Backup.

Let’s see how you can delete completely all the data using Dr.Fone - Data Eraser. do not worry the next section is about how you can back up and restore the data before erasing it completely using Dr.Fone - Phone Backup.

Step 1: Connect your Tecno Spark 10 Pro smartphone to your computer. Start Dr.Fone on your computer. Select “Data Eraser” from the tool list.

Connect your Tecno Spark 10 Pro to the PC via a USB wire. Ensure that your phone has USB debugging turned on. You will see a pop-up window on your phone asking you to approve USB debugging.

Step 2: Begin wiping your Tecno Spark 10 Pro phone.

Dr.Fone will then automatically recognize and connect to your Tecno Spark 10 Pro smartphone. To begin wiping all of your data, select “Erase All Data.”.

Before proceeding, ensure that you have backed up any critical data because deleted data cannot be retrieved. After that, type “000000” to confirm your activity.

Dr. Fone will next proceed to wipe the data on your Tecno Spark 10 Pro phone. The entire procedure takes only a few minutes. Turn off the phone and do not run any phone administration programs on the PC.

Step 3: Reset your phone’s factory data.

Once all app data, photos, and other private data have been completely erased, Dr.Fone will advise you to touch on Factory Data Reset or Erase All Data on the phone. You may use this to completely delete the phone’s settings.

Your Tecno Spark 10 Pro phone has now been completely wiped, giving it the appearance of being brand new.

safe & secure

Dr.Fone - Phone Backup (easy backup before a new hard reset)

Step 1: Connect your Tecno Spark 10 Pro phone to your PC.

Launch Dr.Fone on your PC and choose “Phone Backup” from the list of options.

Then, connect your Tecno Spark 10 Pro phone to the computer using a USB cord. Please ensure that the phone is in USB debugging mode. If your Tecno Spark 10 Pro version is 4.2.2 or higher, a pop-up window on the Tecno Spark 10 Pro phone will prompt you to accept USB Debugging. Please press the OK button.

To begin backing up the data on your Tecno Spark 10 Pro phone, click Backup.

If you have previously used this application to back up your device, you may examine your backup history by clicking on “View backup history.”

Step 2: Choose which file types to back up.

After connecting the Tecno Spark 10 Pro phone, pick the file types you wish to back up. Dr.Fone has already tested all of the file kinds for you. Then, to begin the backup process, click Backup.

The backup will take a few moments. Please do not detach your Tecno Spark 10 Pro phone, use it, or erase any data from it during the backup process.

When the backup is finished, you can view the contents of the backup file by clicking the View the backup button.

safe & secure

The Bottom Line

Now that you know how to hard reset Tecno Spark 10 Pro it is time to implement all the possible ways and see which one works for you. We also recommend you to proceed with backing up and restoration of all the information so that you will not have to repent in the end. It is all about using smart tools like Dr.Fone - Data Eraser and Dr.Fone - Phone Backup.