3 Solutions to Hard Reset Tecno Spark 10 4G Phone Using PC

Find here 3 easy ways to hard reset Android using ADK or Android Device Manager from your PC. Also, do not forget to back up Android to PC before starting.

There are several cases when someone wants to know about how to hard reset an Android phone using PC. Such cases usually arise when your device is not accessible or stolen. It also involves situations when you forget the password or the unlock pattern of your device, or maybe your phone has frozen and is non-responsive. In such situations, it is very important to know how to reset Android phones to factory settings from the computer.

Factory reset will delete all your user data from internal storage. Thus it is also very important to back up all your internal data of the Tecno Spark 10 4G device before you hard reset Android via PC. Moreover, a hard reset should be your last option at hand to revive your Android device. Hence, in this article for all the users out there, we have picked up the solution on how to factory reset Android Phone using PC.

You must ensure that all the steps are followed in sync so that the hard reset Android via PC is successful.

Part 1: Back up Android before hard reset

Since factory reset involves removing all data, adjusted settings and logged accounts from the Tecno Spark 10 4G device; therefore, it is very important to back up all the data before moving on with the factory reset process. So, in this section, we will show you how to first back up your Android device using the Phone Backup . This is an easy-to-use and very convenient Android backup software that can be used to back up an Android device.

Wondershare Dr.Fone

Flexiblely Back up and Restore Android Data

• Back up Android data to the computer with one click.
• Preview and restore the backup to any Android device or iOS device.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restoration.

3,981,454 people have downloaded it

Let’s have a look at the easy process to back up Android before the factory reset it.

Step 1: After installation completes, connect your Android device via data cable and go to “My Backup”. Then, this tool will automatically detect your device.

Step 2: You can now see the file types that will be backed up, such as Contacts, Messages, Calendars, Videos, etc.

Step 3: Click on “Backup pow”  to proceed with the process. The backup process will start, keeping connected the Tecno Spark 10 4G device during the phone backup process.

Step 4: Within a few minutes, your whole device will be backed up. You can click “View Backups” to view all data that is backed up.

Phone Backup is one of the handiest and easy-to-use features within Wondershare Dr.Fone. Users can select their opted files manually to restore. This tool supports 8000+ Android devices worldwide. Users will feel safe and secure using this revolutionary software.

safe & secure

Part 2: Hard Reset Android using Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) is a user-friendly software tool that helps you unlock your Android device if you forget the passcode, pattern lock, PIN, or face/fingerprint lock. It supports various Android devices, allows you to bypass lock screens without data loss, and provides step-by-step instructions for easy unlocking. It also helps with FRP unlock and works on both Windows and Mac systems.

Step 1: Launch Dr.Fone - Screen Unlock on your computer and select “Screen Unlock” from the main interface. After that , you need to connect your Android phone to the computer using a USB cable.

Step 2: Choose “Android” > click “Unlock Android Screen” if you want to remove the lock screen. Choose your device brand. The hard reset methods vary for different device brands, so make sure that you choose the correct device brand.

Step 3: Put the Android phone into Specific mode with the help of Dr.Fone. And then, Dr.Fone will factory reset your Android phone within a few minutes. Now you can access your Android phone without a password!

safe & secure

In this process, we will learn how to hard reset Android phone to factory settings from a computer using SDK. This involves removing all data from the Tecno Spark 10 4G device using a PC.

Follow the given steps to know how to hard reset an Android phone using PC.

Pre-Requirements

• PC that runs on Windows (Linux/Mac installer is also available)

• You have to download Android ADB tools on your computer. Android ADB Download: https://developer.android.com/studio
• A USB Cable to connect your Tecno Spark 10 4G with your computer.

Steps to hard reset Android using SDK

Step 1: Enable USB Debugging in the Android settings. Open Settings>Developer options>USB Debugging. If developer options can’t be found on the Tecno Spark 10 4G device, then please go to Settings > General > About phone > Common > Software info (tap on it 5-8 times).

Step 2: Install Android SDK Tools. Ensure that Platform-tools and USB drivers are selected in the SDK manager window.

Step 3: Ensure that the drivers for your Android are installed on your PC or at least the Generic drivers are present

Step 4: Connect the Tecno Spark 10 4G device to the PC using a USB cable. Ensure that the Tecno Spark 10 4G device is recognized in the Windows Device Manager.

Step 5: Open the command prompt in Windows and go to C:\Users\Your username\AppData\Local\Android\android-sdk\platform-tools

Step 6: Type ADB reboot recovery and the Tecno Spark 10 4G device will restart. The recovery menu must appear after this

Step 7: The device can be disconnected now. Now, you can remove the password or simply Factory Reset the Tecno Spark 10 4G device.

Now, you have successfully reset your device using a PC.

Although the first process is the easiest, in certain cases, you might have to look for other options too. Kindly follow the steps thoroughly and format your device with ease.

Part 4: Hard reset Android using Android Device Manager (Find My Device)

When someone loses their phone, or it is stolen, the two questions that commonly arise are: how to locate the phone? And if it is not possible, how to remotely wipe the phone’s data? People can use the Android Device Manager (also referred to as “Find My Device”) and do the exact two things. The best thing about this is that it doesn’t need to be installed as it is inbuilt on all Android Devices.

Let us look at the following steps to know how to reset Android phones to factory settings from the computer.

Requirements for Android Device Manager to Work:

• It must be activated in the Tecno Spark 10 4G device administrator settings. Go to settings > Security > Device administrators and check whether ADM is enabled as a device administrator or not.
• The location of the Tecno Spark 10 4G device must be ON
• The device must be signed in to a Google account
• The device must have an active internet connection
• The device should not be switched off
• Even if the Tecno Spark 10 4G device is without SIM, the Google account must be active

Steps to use ADM to wipe or locate any Android Device:

Step 1: Directly go to the Android Device Manager website , and log in to your account. You will get three options: “Play Sound”, “Secure Device” and “Erase Device”.

Step 2: Click on the “Play Sound” option will make it raise the alarm, notifying of the location, you can easily locate your Android phone if it is nearby.

Step 3: Click “Secure Device”, you can remotely lock your device with a new passcode, display a custom message on the lock screen, and even track the Tecno Spark 10 4G device’s location in real-time. It also gives you the option to add a contact number, so anyone who finds your device can reach out to you.

Step 4: Select “Erase Device” to reset your device. Once you select this option, the interface will take over and complete the job. Congratulations! You have successfully used the Android Device Manager (ADM) to reset your Android smartphone.

The Bottom Line

So these were the third different methods through which you can hard reset your Android device. Resetting the Tecno Spark 10 4G device involves removing every data from the Tecno Spark 10 4G device. The phone gets back to the same state as it was out of the box. Hence, most importantly, do not forget to back up data using Phone Backup and restore beforehand so that you do not end up losing anything important.

Hard Resetting an Tecno Spark 10 4G Device Made Easy

If you have owned any Tecno Spark 10 4G smartphone, you should know about the UI features these handsets offer. The new age of Color OS has been giving the best client experience. Moreover, it is easier to hard reset your Tecno Spark 10 4G phone if you need to sell a phone. This article will guide you on resetting Tecno Spark 10 4G phone with simple steps.

We have shared a step-by-step manual on how you can perform Tecno Spark 10 4G hard reset. Several methods are mentioned in this article, and all of them are tested. Resetting any Tecno Spark 10 4G phone is not a hard task. You should know about the right steps. However, we suggest you use Dr.Fone - Data Eraser for better results and more commands. It is hassle-free software and lets you selectively delete the desired data from your phone.

Part 1: Some Common Causes of Tecno Spark 10 4G Hard Reset

There are many occasions when a person may want to hard reset their Tecno Spark 10 4G phone. Some of these are:

• If your Tecno Spark 10 4G runs too slowly, you may need to reset it to clear some space.
• When you lose your password or pattern, you will need to reset your device hard to remove the screen lock.
• You can repair a frozen or stuck screen using a hard reset.
• If your phone is constantly crashing, and you want to make your experience smoother, a hard reset may help.
• Lastly, you need to remove everything from your phone when you are looking to sell your phone. In such cases, a hard reset will do your work quickly.

Part 2: 2 simple ways to hard reset your Tecno Spark 10 4G

1. Hard Reset from Settings

• Step 1. Go to the Settings application on your Tecno Spark 10 4G phone and open System Settings.

• Step 2. Go to the “Backup and Reset” menu and click the “Reset Phone” option.
• Step 3. The phone will show numerous choices to reset. It includes resetting network settings, system settings only, contacts, call logs, messages, etc. Moreover, there will be the “Erase All Data” option too.
• Step 4. To hard reset Tecno Spark 10 4G, pick the Erase All Data option to reset your device and bring it to factory settings.

2. From Recovery Mode (By Hardware Keys)

Hard resetting Tecno Spark 10 4G smartphones is also simple, assuming you know the right steps. The following are the steps to get to the recovery mode on Tecno Spark 10 4G smartphones and do an Oppo hard reset. This method is quite helpful when you don’t remember your phone’s screen lock.

• Step 1: Make sure to power off your Tecno Spark 10 4G smartphone to get started. Press and hold the power key on your Tecno Spark 10 4G phone for about 10 seconds.
• Step 2: Simultaneously, press and hold the power and Volume down keys until the Tecno Spark 10 4G logo springs up on the screen. This will bring the Recovery mode screen.
• Step 3: Select your preferred language using the Volume and Power buttons, and then tap on “Wipe Data”.

• Step 4: You will be approached to enter the confirmation code (screen lock PIN).
• Step 5: Complete step 4 and afterward select the Format data choice.
• Step 6: Select OK to finish the hard reset strategy on your Oppo device.

Part 3: Best Tools to Make your Tecno Spark 10 4G Hard Reset Easier

To make your Oppo hard reset experience easier, you need to look for an expert service. We would suggest you use Wondershare Dr.Fone. Dr.Fone is an all-in-one professional software for screen unlock, data erasure, data recovery, system repair, and more. In case of a hard reset, if you have forgotten the screen lock, you can use their Screen Unlock feature. Interestingly, their Data Erasure software provides the full command to its users. You can use it to delete the desired files or fully reset your phone. Overall, it is a safe tool with an almost 100% access rate. It works with almost 99% of the Android phones available in the market and has great customer support service. Therefore, download it right away and make your hard reset experience smoother.

Steps to Use Dr.Fone - Screen Unlock (Android)

• Step 1: After launching Dr.Fone, please use a USB cable to connect your Tecno Spark 10 4G phone. And tap the “Screen Unlock” option.
• Step 2: Please select the left part with 3 phones, “Unlock Android Screen” to proceed.

• Step 3: To unlock Tecno Spark 10 4G phone, the left “100% Remove Screen Lock” is the only feasible way. In this interface, we include most android brands. And as Tecno Spark 10 4G user, it’s also in the list we offered.

• Step 4: Recovery mode is the key step for the whole process. Here is a simple guide to help you hard reset your Tecno Spark 10 4G device.

• Congrats! You’re able to access your Tecno Spark 10 4G phone without hassle and it’s already hard reset!

safe & secure

Steps to Use Dr.Fone - Data Eraser (Android)

• Step 1: Open Dr.Fone’s program and select the “Data Eraser” tool.
• Step 2: Connect your Tecno Spark 10 4G phone to the PC through a USB connector.
• Step 3: Click on the “Erase All Data” button to begin. Ensure you have backed up your important files before you continue.

• Step 4: Then type in “000000” to affirm your action. Then Dr.Fone will begin deleting all data on your phone.

• Step 5: Tap on Factory Data Reset or Erase All Data on the phone. This will assist you with totally cleaning up the settings on the phone.

Click here

• Presently, your Android phone has been wiped, and it can be used as a new one.

safe & secure

Conclusion

Resetting an Tecno Spark 10 4G phone can be tricky sometimes; therefore, it should be finished with the right tools and strategies. Above, we have listed multiple ways to hard reset Tecno Spark 10 4G. You need to pick the best strategy according to your situation. However, for an easy, solid, protected, and speedy technique, we recommend Dr.Fone by Wondershare . It provides multiple tools in a single program and has a higher success ratio compared to the other methods. So install it right away for a speedy hard reset of your Tecno Spark 10 4G device.

You Might Also Like

All Things You Need to Know about Wipe Data/Factoy Reset For Tecno Spark 10 4G

Wiping data or carrying out a factory reset on an Android device is an effective solution for various issues on your Android phone. Even if you are contemplating selling your phone and you need all your device data to be wiped out, you carry out a factory reset. But, before you proceed, what’s important is to understand about wipe data/ factory reset, because, if you don’t, you might end up losing all your important data before it is backed up, serving no purpose. So, before you wipe data/ factory reset Android, here’s what you should know about it.

Click here

Part 1: What data will be wiped by Wipe Data/Factory Reset?

Doing a factory reset on the Android device will remove all the applications installed on the Tecno Spark 10 4G device along with the data associated with them. This brings back all the default settings of the Tecno Spark 10 4G device as it was when the phone was new, giving you a clean slate to start all over again.

Since Wipe data/factory reset deletes all applications, app data, and information (documents, videos, images, music, etc) stored in the internal space, it is required for you to perform a data backup operation before you reset the Android device to factory settings. However, wipe data/factory reset does not affect the SD card in any way. So, even if you have the SD card inserted with videos, images, documents, and any other personal information in the Android device while carrying out a factory reset, everything will remain safe and intact.

Part 2: How to perform Wipe Data/ Factory Reset?

Performing wipe data/factory reset on your Android device e is very simple. It is a matter of time before you wipe out everything lying on the internal storage of your Android device. Here’s how you can perform Wipe data/ Factory Rest on your device:

Step 1: First of all, turn off the Tecno Spark 10 4G device. Then, use the volume up button, volume down button, and Power button on your Android device simultaneously and hold on to the buttons until the phone turns on.

Step 2: Release the buttons when the Tecno Spark 10 4G device is powered on. Now, use the volume up and down button to sift through the options given on the screen. Use the power button to select “Recovery Mode” on the screen. Your phone will restart into “Recovery Mode’ and you will find the below screen:

Step 3: Holding the power button down, use the volume up button, and the Android system recovery menu will pop up.

Now, scroll down to “wipe data/factory reset” option from the list of commands and use the Power button to select it.

Now, scroll down to “Yes – delete all user data” using the volume button and then push the power button to select.

In some time your device will be reset into factory settings with all your data erased. The entire process will take a few minutes. Ensure that you have the phone at least 70% charged so that it does not run out of charge midway.

Part 3: Does Wipe Data/ Factory Reset wipe all your data?

There are various instances where you would require performing a wipe/factory reset on your device. It might be because of some glitch that you would like to troubleshoot on your Android device. Wiping data from the phone is a universal solution in such cases. Even in cases where you want to sell your device, performing a factory reset seems the best option. What’s important is to make sure you don’t leave a trace of your personal information on the Tecno Spark 10 4G device. Therefore, wipe data/factory reset is never the ultimate solution to rely on. It is neither the best option anyway.

Contrary to conventional thought of relying on wipe data/factory reset Android believing it to be the best solution for wiping out complete data from the phone, all research outcomes have proved something different. It is easier to recover account tokens used to authenticate you when you enter a password for the first time, from service providers like Facebook, WhatsApp, and Google. Hence it is easier to restore the user’s credentials as well.

So, to protect your privacy and completely wipe data off the Tecno Spark 10 4G device, you can use Dr.Fone - Data Eraser. This is an amazing tool that erases everything on the Tecno Spark 10 4G device without leaving an ounce of data in it. Here’s how you can use Dr.Fone - Data Eraser to completely wipe the data and protect privacy:

Dr.Fone - Data Eraser

Fully Erase Everything on Android and Protect Your Privacy

• Simple, click-through process.
• Wipe your Android completely and permanently.
• Erase photos, contacts, messages, call logs, and all private data.
• Supports all Android devices available in the market.

4,683,556 people have downloaded it

Step 1: Install and launch Dr.Fone - Data Eraser

First of all, install Dr.Fone on your computer and launch it by double-clicking on the icon. You will find the below window. You will find various toolkits on the interface. Select Erase from various toolkits.

Step 2: Initiate the Process

When the tool’s window opens, click Start to trigger the operation.

Step 3: Confirm and Execute Data Eraser

To remove all data, confirm with the given code. After inputting the code, select Erase Now. A message will appear upon erasure completion. Click Erasure Report to review the types of data erased.

This will protect your privacy as your Android device will reboot into default settings with all the data erased.

Since the erased data cannot be recovered, it is highly recommended to have all the personal data backed up before operating here using Dr.Fone.

And you could watch this YouTube video for an in-depth tutorial.

Try It Free Try It Free

safe & secure

Conclusion

Hence, today we learned about wiping data and also factory reset. Well as per us, using Dr.Fone - Data Eraser is the best option as it is a simple and click-through process and helps you completely erase data from your Android. This toolkit also is the best as it supports all Android devices available in the market today.

Try It Free Try It Free

safe & secure