Is your Tecno Pop 7 Pro working too slow? Here’s how you can hard reset it

If Tecno Pop 7 Pro 3.4 hard reset or Tecno Pop 7 Pro hard reset is the only option for your mobile phone, you can perform a factory reset to make your device function as it did on the first day. You may need a hard reset if it works slowly, hangs, you want to bypass screen lock, your memory is full, and you want to erase everything, you want to sell or give your device away, and you don’t want anyone to be able to access your files or passwords.

The following instructions will show you how to completely wipe up all of your data and restore the Tecno Pop 7 Pro to its factory-fresh condition.

Part 1: Why do I Need to Hard Reset My Tecno Pop 7 Pro?

We advise you to remove all accounts from the Tecno Pop 7 Pro device before performing a factory reset, especially if you plan to sell, give away, or donate the 3.4. It is also a good idea to unlink the Google account. By doing this, we can prevent issues for new users as some more recent smartphones have a feature called FRP, or Factory Reset Protection, which requires the Google account or PIN number that was originally used to set up the Tecno Pop 7 Pro when a device is factory restored.

Part 2: How to Hard Reset My Tecno Pop 7 Pro

1. Fastboot Mode

• Shut down your phone.
• Add a USB cord to your computer or laptop.
• Your phone should now start up in Fastboot Mode after you press and hold the Volume Down + Power buttons for a few seconds. Tecno Pop 7 Pro Recovery Mode and Fastboot Mode
• Using the ADB command, start Tecno Pop 7 Pro in Bootloader Mode or Fastboot Mode.
• If your computer has ADB and Fastboot drivers installed, and your phone has USB debugging turned on, execute the command below after connecting it.
• Launch Command Prompt (CMD) on your PC, then type the command listed below.

reboot bootloader using adb

• After some time, you will see that your Tecno Pop 7 Pro has been hard reset.

2. Hard reset with hardware key button

• Choose “wipe data/factory reset” on your Tecno Pop 7 Pro to do a hard reset. Scroll down with the Volume buttons, and press the Power key to agree.
• Next, choose yes from the menu if further confirmation is required, and then click the Power button once.
• Lastly, press the Power key and choose the Reboot system.
• Do not forget to charge your phone.
• Initially, turn off your phone.
• Now Press the Volume Up + Power key for a few seconds to enter recovery mode.
• Press and hold the Power and Volume Up buttons at the same time until the Tecno Pop 7 Pro device vibrates. Release all the presses if the Tecno Pop 7 Pro logo or Recovery screen shows.
• You can give your phone up to 30 seconds to display the recovery screen.

Bonus Tips

Dr.Fone - Data Eraser (delete all data completely)

Dr.Fone - Data Eraser helps you quickly get rid of all the unwanted information and all of your data however it is always advisable to back it up using the Dr.Fone - Phone Backup.

Let’s see how you can delete completely all the data using Dr.Fone - Data Eraser. do not worry the next section is about how you can back up and restore the data before erasing it completely using Dr.Fone - Phone Backup.

Step 1: Connect your Tecno Pop 7 Pro smartphone to your computer. Start Dr.Fone on your computer. Select “Data Eraser” from the tool list.

Connect your Tecno Pop 7 Pro to the PC via a USB wire. Ensure that your phone has USB debugging turned on. You will see a pop-up window on your phone asking you to approve USB debugging.

Step 2: Begin wiping your Tecno Pop 7 Pro phone.

Dr.Fone will then automatically recognize and connect to your Tecno Pop 7 Pro smartphone. To begin wiping all of your data, select “Erase All Data.”.

Before proceeding, ensure that you have backed up any critical data because deleted data cannot be retrieved. After that, type “000000” to confirm your activity.

Dr. Fone will next proceed to wipe the data on your Tecno Pop 7 Pro phone. The entire procedure takes only a few minutes. Turn off the phone and do not run any phone administration programs on the PC.

Step 3: Reset your phone’s factory data.

Once all app data, photos, and other private data have been completely erased, Dr.Fone will advise you to touch on Factory Data Reset or Erase All Data on the phone. You may use this to completely delete the phone’s settings.

Your Tecno Pop 7 Pro phone has now been completely wiped, giving it the appearance of being brand new.

safe & secure

Dr.Fone - Phone Backup (easy backup before a new hard reset)

Step 1: Connect your Tecno Pop 7 Pro phone to your PC.

Launch Dr.Fone on your PC and choose “Phone Backup” from the list of options.

Then, connect your Tecno Pop 7 Pro phone to the computer using a USB cord. Please ensure that the phone is in USB debugging mode. If your Tecno Pop 7 Pro version is 4.2.2 or higher, a pop-up window on the Tecno Pop 7 Pro phone will prompt you to accept USB Debugging. Please press the OK button.

To begin backing up the data on your Tecno Pop 7 Pro phone, click Backup.

If you have previously used this application to back up your device, you may examine your backup history by clicking on “View backup history.”

Step 2: Choose which file types to back up.

After connecting the Tecno Pop 7 Pro phone, pick the file types you wish to back up. Dr.Fone has already tested all of the file kinds for you. Then, to begin the backup process, click Backup.

The backup will take a few moments. Please do not detach your Tecno Pop 7 Pro phone, use it, or erase any data from it during the backup process.

When the backup is finished, you can view the contents of the backup file by clicking the View the backup button.

safe & secure

The Bottom Line

Now that you know how to hard reset Tecno Pop 7 Pro it is time to implement all the possible ways and see which one works for you. We also recommend you to proceed with backing up and restoration of all the information so that you will not have to repent in the end. It is all about using smart tools like Dr.Fone - Data Eraser and Dr.Fone - Phone Backup.

Hard Resetting an Tecno Pop 7 Pro Device Made Easy

If you have owned any Tecno Pop 7 Pro smartphone, you should know about the UI features these handsets offer. The new age of Color OS has been giving the best client experience. Moreover, it is easier to hard reset your Tecno Pop 7 Pro phone if you need to sell a phone. This article will guide you on resetting Tecno Pop 7 Pro phone with simple steps.

We have shared a step-by-step manual on how you can perform Tecno Pop 7 Pro hard reset. Several methods are mentioned in this article, and all of them are tested. Resetting any Tecno Pop 7 Pro phone is not a hard task. You should know about the right steps. However, we suggest you use Dr.Fone - Data Eraser for better results and more commands. It is hassle-free software and lets you selectively delete the desired data from your phone.

Part 1: Some Common Causes of Tecno Pop 7 Pro Hard Reset

There are many occasions when a person may want to hard reset their Tecno Pop 7 Pro phone. Some of these are:

• If your Tecno Pop 7 Pro runs too slowly, you may need to reset it to clear some space.
• When you lose your password or pattern, you will need to reset your device hard to remove the screen lock.
• You can repair a frozen or stuck screen using a hard reset.
• If your phone is constantly crashing, and you want to make your experience smoother, a hard reset may help.
• Lastly, you need to remove everything from your phone when you are looking to sell your phone. In such cases, a hard reset will do your work quickly.

Part 2: 2 simple ways to hard reset your Tecno Pop 7 Pro

1. Hard Reset from Settings

• Step 1. Go to the Settings application on your Tecno Pop 7 Pro phone and open System Settings.

• Step 2. Go to the “Backup and Reset” menu and click the “Reset Phone” option.
• Step 3. The phone will show numerous choices to reset. It includes resetting network settings, system settings only, contacts, call logs, messages, etc. Moreover, there will be the “Erase All Data” option too.
• Step 4. To hard reset Tecno Pop 7 Pro, pick the Erase All Data option to reset your device and bring it to factory settings.

2. From Recovery Mode (By Hardware Keys)

Hard resetting Tecno Pop 7 Pro smartphones is also simple, assuming you know the right steps. The following are the steps to get to the recovery mode on Tecno Pop 7 Pro smartphones and do an Oppo hard reset. This method is quite helpful when you don’t remember your phone’s screen lock.

• Step 1: Make sure to power off your Tecno Pop 7 Pro smartphone to get started. Press and hold the power key on your Tecno Pop 7 Pro phone for about 10 seconds.
• Step 2: Simultaneously, press and hold the power and Volume down keys until the Tecno Pop 7 Pro logo springs up on the screen. This will bring the Recovery mode screen.
• Step 3: Select your preferred language using the Volume and Power buttons, and then tap on “Wipe Data”.

• Step 4: You will be approached to enter the confirmation code (screen lock PIN).
• Step 5: Complete step 4 and afterward select the Format data choice.
• Step 6: Select OK to finish the hard reset strategy on your Oppo device.

Part 3: Best Tools to Make your Tecno Pop 7 Pro Hard Reset Easier

To make your Oppo hard reset experience easier, you need to look for an expert service. We would suggest you use Wondershare Dr.Fone. Dr.Fone is an all-in-one professional software for screen unlock, data erasure, data recovery, system repair, and more. In case of a hard reset, if you have forgotten the screen lock, you can use their Screen Unlock feature. Interestingly, their Data Erasure software provides the full command to its users. You can use it to delete the desired files or fully reset your phone. Overall, it is a safe tool with an almost 100% access rate. It works with almost 99% of the Android phones available in the market and has great customer support service. Therefore, download it right away and make your hard reset experience smoother.

Steps to Use Dr.Fone - Screen Unlock (Android)

• Step 1: After launching Dr.Fone, please use a USB cable to connect your Tecno Pop 7 Pro phone. And tap the “Screen Unlock” option.
• Step 2: Please select the left part with 3 phones, “Unlock Android Screen” to proceed.

• Step 3: To unlock Tecno Pop 7 Pro phone, the left “100% Remove Screen Lock” is the only feasible way. In this interface, we include most android brands. And as Tecno Pop 7 Pro user, it’s also in the list we offered.

• Step 4: Recovery mode is the key step for the whole process. Here is a simple guide to help you hard reset your Tecno Pop 7 Pro device.

• Congrats! You’re able to access your Tecno Pop 7 Pro phone without hassle and it’s already hard reset!

safe & secure

Steps to Use Dr.Fone - Data Eraser (Android)

• Step 1: Open Dr.Fone’s program and select the “Data Eraser” tool.
• Step 2: Connect your Tecno Pop 7 Pro phone to the PC through a USB connector.
• Step 3: Click on the “Erase All Data” button to begin. Ensure you have backed up your important files before you continue.

• Step 4: Then type in “000000” to affirm your action. Then Dr.Fone will begin deleting all data on your phone.

• Step 5: Tap on Factory Data Reset or Erase All Data on the phone. This will assist you with totally cleaning up the settings on the phone.

• Presently, your Android phone has been wiped, and it can be used as a new one.

safe & secure

Conclusion

Resetting an Tecno Pop 7 Pro phone can be tricky sometimes; therefore, it should be finished with the right tools and strategies. Above, we have listed multiple ways to hard reset Tecno Pop 7 Pro. You need to pick the best strategy according to your situation. However, for an easy, solid, protected, and speedy technique, we recommend Dr.Fone by Wondershare . It provides multiple tools in a single program and has a higher success ratio compared to the other methods. So install it right away for a speedy hard reset of your Tecno Pop 7 Pro device.

You Might Also Like

5 Ways to Reset Tecno Pop 7 Pro Without Volume Buttons

Sometimes, there may be a necessity to reset an Android device to its factory settings. Whether you wish to sell your device to someone else or unlock your device, you will most likely have to do a hard reset. Most Android devices can be reset easily by pressing a combination of volume and power buttons. But to hard reset Android tablet without volume buttons is a different ball game altogether and perhaps a lot more cumbersome. We are here to break that myth for you!

If the Android device is working well, to hard reset Android tablet without using the volume buttons won’t be much of a problem and can be done within just a few taps. But if the Tecno Pop 7 Pro device is not functioning, it may pose a problem. That said, there are several methods to hard reset Android tablets without volume buttons. We have been able to list some of the easiest methods and describe them for you in the sections that follow. So read on to learn how to hard reset your Android device without volume buttons.

safe & secure

Part 1: Reset Android without volume buttons using Dr.Fone - Data Eraser (Android)

If you need to reset an Android device that doesn’t have functional volume buttons, Dr.Fone - Data Eraser (Android) can assist you in securely erasing all data and performing a reset. This software provides a reliable solution that doesn’t require volume buttons.

Before proceeding with the reset using Dr.Fone - Data Eraser (Android), carefully consider whether you still want to delete all data from your phone. Resetting will permanently erase all files, settings, and personal information on your device, and it cannot be undone. Therefore, it is important to back up any important data before performing the reset. If you are certain that you want to proceed with the reset using Dr.Fone, follow the steps below:

safe & secure

• Step 1: Download Wondershare Dr.Fone on your computer. Open the “Data Eraser” tool and connect your android device to the computer.

• Step 2: Click “Erase” to start erasing all data on the Android device. Think again about whether you want to delete all data and type “000000” to confirm.

• Step 3: Wait for the erase process to end, and you can view the erasure report to check the data type erased after erasing completes.

safe & secure

Part 2: Reset Android without volume button in recovery mode (need home button)

Resetting an Android smartphone or a tablet is not very hard, especially, if there is a home button on your device. A combination of few button presses including the home button will be the first step to the factory data resetting process. But if there are no physical volume buttons, the process may be quite different from the normal tablets. Only after booting your Android tablet into recovery mode, you will be able to hard reset Android tablet without volume buttons. To know how to reset an Android tablet without volume buttons, follow the steps described below. Remember that this method would only work if your Android device has a home button.

• Step 1: Press Power off + home button.

Press the power button until the options for Power off, Restart, and others appear. Now, tap on the “Power off” option and hold on to it while pressing the home button of your android device at the same time.

• Step 2: Confirm boot into safe mode.

Now, the screen for rebooting into safe mode will appear. Tap on “Yes” to enter the safe mode.

• Step 3: Enter recovery mode.

Press and hold the power button as well as the home button of your device simultaneously until a new screen appears. After it appears, release the two buttons and press the power button one more time. Now, press and hold down the home button. With that, you will enter into recovery mode and a new set of options will appear on the screen.

• Step 4: Navigate and do Factory Reset.

Using the home button to navigate, move down to the “Wipe data/factory reset” option. Press the power button to select the option.

You may have to confirm your choice by selecting “Yes”.

Click here

• Step 5: Reboot your device.

After the reset is complete, navigate to the “reboot system now” option and select it to reboot your device. At the end of this process, your device will be reset.

Part 3: Reset Android with the reset pinhole

There are many reasons for opting to reset an Android smartphone or tablet. Sometimes, a forgotten password might get your tablet locked. At times, the screen of your smartphone or tablet might get stuck and fail to respond. Or your device might come with a non-removable battery to make matters worse. For all these problems and many others, you might want to reset your device. But if your device does not come with a home button or volume buttons, you might want to use a different method. Generally, such devices come with a reset pinhole on the Tecno Pop 7 Pro device which can be used to reset the Tecno Pop 7 Pro device. To perform a tablet hard reset without the volume button, follow the simple steps described below.

• Step 1: Find the Reset pinhole.

Look for a very small opening on the back panel or the bezels of a smartphone. Usually, such pinholes are marked “Reset” or “Reboot” and are available on the top left side of the back panel. But be careful not to mistake it with the microphone as using it for resetting your gadget may damage the small microphone permanently and lead to other complications.

• Step 2: Insert a pin into the hole.

After locating it, insert a stretched paperclip or a small pin into the hole and press it for a few seconds.

Now all the data in your Android device will be reset. After this, you can continue to use your device normally without any problem.

Part 4: Reset Android from Settings (phone works normally)

If your Android tablet or smartphone is functioning normally, your device can be reset to the factory settings using just your device itself. Even if your device does not have a home button or volume control buttons, this method will be applicable and can be used to reset the Tecno Pop 7 Pro device. But before using this method to reset your Android device, make sure to back up all the necessary information that you have on your device. You can also sync all the important files to the cloud using your Google account. Also, it is necessary to keep in mind that this procedure will remove all the accounts into which your device is signed in. To know how to reset an Android tablet without volume button, read on.

• Step 1: Open the Settings app.

Tap on the Settings app in the app section of your device to open it.

• Step 2: Select the Data Reset folder.

After that, navigate or scroll down until you can find the “Backup and Reset” option. Tap on it to open the folder.

• Step 3: Tap on Factory data reset.

Now swipe down to find the “Factory data reset” option and tap on it. A new screen will appear, requesting you for confirmation to proceed with the process. Tap on “Reset device” to start the process.

At the end of the process, your device will be reset and ready to use after it completes the mandatory reboot.

Part 5: Reset Android tablet to unlock Android using Dr.Fone - Screen Unlock (Android)

If you are facing the challenge of resetting an Android tablet to unlock the lock screen, the easiest way is to use a dedicated tool. Dr.Fone - Screen Unlock (Android) is recommended in this case. It is a helpful software that provides a solution to bypass screen lock and perform a reset on your Android tablet.

Dr.Fone - Screen Unlock (Android)

The Best Tool to Reset Android and Solve Your Screen Locks

• Reset Android tablets or phones when the Tecno Pop 7 Pro device is locked or without a volume button.
• Bypass the FRP lock of Tecno Pop 7 Pro without a PIN or Google account.
• Support most mainstream Android models like Tecno Pop 7 Pro, Tecno Pop 7 Pro, Xiaomi, etc.
• Everyone can handle the lock screen without any tech knowledge.

3,724,689 people have downloaded it

Here are the steps about how to reset Android to unlock lock screen.

• Step 1: Launch Dr.Fone - Screen Unlock (Android) and connect your Android device.

First, install and launch Wondershare Dr.Fone on your computer. Select the “Screen Unlock” option from the main interface and then click “Android” > “Unlock Android Screen”. Using a USB cable, connect your Android tablet to the computer.

• Step 2: Select your device brand and follow the guide to restart your device.

Dr.Fone will ask you to select your device brand and display the specific way to restart the Tecno Pop 7 Pro device. You need to select your device brand in this step because the unlock way of different device brands is different. And then follow the instructions to restart your device.

Click here

• Step 3: The lock screen of your device is removed.

Wait for the reboot process to complete, and then you can access the phone or tablet without the password.

Conclusion

So these are the methods with which you can do a reset without using volume buttons. The difficulty level of the methods depends on the type and brand of the Android device. The first two parts can be performed easily by anyone, and that too in a matter of a few minutes. However, the third method may pose some difficulty, particularly because manufacturers set different key combinations for rebooting the Tecno Pop 7 Pro device into recovery. Nevertheless, once it is figured out, the rest is easy. Hence, it is up to you to decide on the method to be adopted for hard resetting your Android device.

safe & secure