Full Guide to Hard Reset Your Tecno Spark Go (2023)

Tecno Spark Go (2023) hard reset is needed when you wish to sell your phone or give it to someone. In such situations, you must have your data removed from the phone. So, to remove the whole data with a single click, there is no better method than a hard reset. A hard reset will remove photos, videos, contacts, applications, messages, etc. Therefore, you should use a reliable source to help save your system files. In this regard, we suggest Wondershare Dr.Fone.

Dr.Fone by Wondershare is a reliable tool for all your Android needs. It can erase, recover, unlock, back up, and do other things with just a single software. Therefore, this article explains how to reset Tecno Spark Go (2023) and use Dr.Fone. We assure you that your privacy will be safe, and no file corruption will occur while using this program.

Part 1: Some Common Causes About Tecno Spark Go (2023) Hard Reset

Some of the most common situations that require Tecno Spark Go (2023) Hard Reset are:

• When you try to sell your Tecno Spark Go (2023) phone or give it to others, you must delete your data. To do so, you must hard reset your phone.
• Too many wrong password/pattern attempts can lock your device. Hence, a hard reset will unlock your phone in recovery mode.
• If your device functions too slowly, a hard reset will make it faster. A hard reset will clear the cache and unwanted files, so your phone runs smoothly.
• Lastly, an Tecno Spark Go (2023) hard reset prevents your device from constant crashes. Therefore, if your phone has some software issue, look no further.

Part 2: Easy Ways for Your Tecno Spark Go (2023) Hard Reset

1. Hard Reset from Settings

Step 1: Before you continue with the hard reset or factory reset on your Tecno Spark Go (2023) smartphone. However, make sure you have a backup of the important data put away on the phone.

Step 2: If you wish to do a straightforward hard reset, head to the Settings menu and search “Erase All Data” or “Factory Reset”.

Step 3: Tap the “Erase All Data” choice and snap on “OK” once you find it.

Step 4: Approve the command in the popup window. However, ensure that your Tecno Spark Go (2023) phone has an adequate battery to start and reset. You can put your phone on charging if the battery levels are low.

2. Recovery Mode

Recovery mode assists you in opening the hidden features on your Tecno Spark Go (2023). By utilizing the Recovery mode, you can perform a hard reset on your device and wipe data. The following are the steps to get to the recovery mode on Tecno Spark Go (2023) and complete the hard reset:

Step 1: Firstly, your Tecno Spark Go (2023) must be turned off to perform a hard reset. Press and hold the power key on your Tecno Spark Go (2023) smartphone for around 10 seconds to turn it off.

Step 2: Simultaneously, press and hold Power and the volume down keys until the Tecno Spark Go (2023) logo springs up on the screen. That will raise the Recovery mode screen.

Step 3: Select your preferred language and tap on “Wipe Data”.

Step 4: You will be approached to enter the confirmation code (screen lock PIN).

Step 5: Complete the above steps and select the Format Data choice afterward.

Step 6: Click OK to finish the process, and that’s how to reset Tecno Spark Go (2023) phone.

3. Dr.Fone-Data Eraser

Whether you intend to Change your phone/tablet or give them to somebody, you should delete your data. However, the physically deleted records on Android can be restored, especially with some expert tools. In light of this, the Dr.Fone Data Eraser ensures you erase information on Tecno Spark Go (2023) permanently. It can’t be recovered using any means, including proficient tools. Here’s how:

• Open Dr.Fone on your PC and select “Data Eraser,” among other tools.

• Connect your Tecno Spark Go (2023) phone to the PC through a USB cable.

• Click the “Erase All Data” button to eradicate all your data.

• Key in “000000” into the popup window to affirm your activity.

• Then, at that point, Dr.Fone will begin deleting all data on your Tecno Spark Go (2023) phone.

• Then click the Factory Data Reset or Erase All Data on the phone. That will assist you with totally cleaning all the settings on the phone.

safe & secure

4. Dr.Fone-Phone Backup

Dr.Fone Phone Backup (Android) is a wonderful tool for backups and restoration that you can depend on totally. It has a backup feature that can back up a large portion of the Tecno Spark Go (2023) files. Not just those, the backup tool can likewise recover files from your Android phone or tablet PC if you lose them unexpectedly. The method involved with backing up is quick enough. At the same time, you can select a few files to recover, which will save time. Here’s what you need to do:

• Open Dr.Fone on your PC, and select the “Phone Backup” tool.

• Then, at that point, connect your Tecno Spark Go (2023) phone to the PC through a USB cable and tap on OK.

• Click Backup to begin the Backup of Tecno Spark Go (2023) phone data.
• After the Android phone is connected, select the File types you need to back up. Of course, Dr.Fone has checked all the document types for you. Then click on Backup to begin.

• The process will require a couple of minutes.

• After it is finished, you can tap on View the backup button to see what’s in the backup record.

safe & secure

Conclusion

Above are some strategies with which you can do an Tecno Spark Go (2023) hard reset. However, a backup is needed if you don’t want to lose your data after a reset. Therefore, in the end, we have mentioned the best tools for that purpose. You must consider these tools before going for a simple reset. Anybody can perform the last two sections (Dr.Fone tools) without issue. Therefore, we strongly suggest you download and install the Dr.Fone tool by Wondershare.

How to Reset a Tecno Spark Go (2023) Phone That Is Locked

“Looking for the best solutions on how to factory reset Tecno Spark Go (2023) phone when locked?”

The need to reset a Tecno Spark Go (2023) phone arises in several situations like forgetting the password, PIN, or pattern, purchasing a second-hand device that is locked, accidentally changing the password or setting a wrong one, and others. In all these and other similar situations, you would need to reset your Tecno Spark Go (2023) phone and this can be done using different methods and tools.

In this article, we will discuss all these methods that can help you reset your device so that it can be accessed without any hassles.

Part 1: Things You Should Be Aware of Before Resetting Tecno Spark Go (2023) Phones

Before you start resetting your Tecno Spark Go (2023) device through any of the methods, there are certain important things that should be considered and taken care of. Check them out as below.

• First of all, ensure that your Tecno Spark Go (2023) phone is charged so that the battery does not go off in between and stop the ongoing process.
• Ensure to clear the cache on your Tecno Spark Go (2023) phone.
• If your Tecno Spark Go (2023) phone is not locked, make sure to take the backup of the Tecno Spark Go (2023) device to prevent accidental loss of data. If the Tecno Spark Go (2023) device is locked, ensure that from next time you keep taking the backup on regular basis.

Part 2: How to Reset Tecno Spark Go (2023) Phone When Locked?

Once you have fulfilled the above mention pre-requisites, next comes the process of device resetting. If your Tecno Spark Go (2023) phone is locked, there are different methods that can help you reset your device and the popular ones can be checked as below.

Method 1: Reset Tecno Spark Go (2023) using Google’s Android Device Manager

The Android Device Manager which is also known as Find My Phone is an excellent feature that is majorly used for locating the lost or the stolen phone. This feature also allows the users to unlock and reset their devices. The Android Device Manager can only function if you know the Google ID and password that was used for device initialization. The feature can be used to erase the Tecno Spark Go (2023) device data and reset it.

Steps to reset Tecno Spark Go (2023) phone using Google Android Device Manager

• Step 1. On your PC browser, using your Google account, sign in to the Google Find My Device.
• Step 2. The list of devices will appear on the screen, from which you need to choose the Tecno Spark Go (2023) phone that you want to unlock and reset.
• Step 3. Now, from the available options, click on ERASE DEVICE.
• Step 4. Again, tap on ERASE DEVICE, and to continue you need to log in to your Google account.

With the completion of the above steps, your Tecno Spark Go (2023) phone will reset.

Method 2: Perform a Hard Reset on Tecno Spark Go (2023) with Hardware Keys

Hard reset which is also termed factory reset is a feature that will reset all the Tecno Spark Go (2023) device settings and bring them to the factory setting status. While you perform the hard reset, all the data of your phone as well as the installed apps will also be deleted.

Steps to hard reset Tecno Spark Go (2023) Phone

• Step 1. Using the Power button, turn off your Tecno Spark Go (2023) phone.
• Step 2. Press and hold the Volume Up and Power button together for a few seconds.
• Step 3. In some time, the Recovery mode will load on the screen. From the menu, choose to Wipe data/factory reset using the Volume Up/Down buttons and the selected option can be confirmed using the Power button.
• Step 4. At the space provided, enter the word Yes and then click on the Wipe data/factory reset button.
• Step 5. Again, to confirm the hard reset, click on the Wipe data/factory reset button.
• Step 6. The process of hard resetting will start and when completed, click on Reboot system now for restarting the unlocked phone.

Note: After the hard reset, Google Account Verification, FRP screen will appear where you need to enter the correct Google account or PIN that was previously synced with the Tecno Spark Go (2023) device. If you know the Google credentials, it’s great, but in case you have forgotten then no need to worry as there are Tecno Spark Go (2023) FRP bypass tools available as well as Tecno Spark Go (2023) codes that can be used to bypass the FRP lock.

Method 3: An Efficient Alternative to Reset Locked Tecno Spark Go (2023) Phone

If the above-listed methods do not work for any reason, we recommend using Dr.Fone-Screen Unlock (Android) as the best alternative. This is a Windows and Mac-based tool that can help bypass and remove all types of screen locks including PIN, passcode, pattern, Face ID as well as a fingerprint. The software not only works with Tecno Spark Go (2023) but all other popular Android devices including Tecno Spark Go (2023), LG, Oppo, and more.

safe & secure

The screen locks can be removed without rooting, and the software is completely safe to use.

Dr.Fone - Screen Unlock (Android)

The Best Tool for factory reset Tecno Spark Go (2023) Phone When Locked

• Work perfectly to reset your Tecno Spark Go (2023) without a password.
• It’s the only solution available that works with both Windows and Mac to help you regain access to your device easily.
• Everybody can handle it without any technical background.
• Except for resetting, it also unlocks the locked Tecno Spark Go (2023) if you are using a PIN, fingerprint, or other screen locks.

4,464,992 people have downloaded it

Steps on how to factory reset Tecno Spark Go (2023) phone without password using Dr. Fone - Screen Unlock

• Step 1. Download, install and launch the Dr.Fone software on your PC and from the main menu choose the Screen Unlock feature.
• Step 2. Next, your Tecno Spark Go (2023) phone needs to be connected to the system using a USB cable, and then from the interface select Unlock Android Screen option.

• Step 3. In the next step, select your Tecno Spark Go (2023) phone’s brand from the supported list in Dr.Fone to ensure it enters the correct specific mode.

• Step 4. Dr.Fone will begin unlocking the Android screen once it enters the specific mode. Please wait for the unlock process to finish.

Part 3. How to Reset Tecno Spark Go (2023) Phone at Normal Cases?

In normal situations, the Tecno Spark Go (2023) phones can be reset using the settings menu or the Android Factory Reset code. Both these methods and their guide to getting the process done are listed below.

Method 1: Reset Tecno Spark Go (2023) phones through the Phone Settings menu

To unlock the screen and reset your Tecno Spark Go (2023) phone, the settings menu of the Tecno Spark Go (2023) device can be used. For this method, you do not need to make your device enter the recovery mode. The steps for the process are as follows.

• Step 1. On your Tecno Spark Go (2023) phone, open the Settings app and look for the Backup and Reset option from the Personalization section.
• Step 2. Next, select Factory Data Reset Option.
• Step 3. Go through the on-screen details and then click on the Reset device button.

The steps above will reset your phone to the default factory settings.

Method 2: Reset Tecno Spark Go (2023) phones with factory reset code

There are Android Reset Codes for different brands of phones that can be used for resetting the Tecno Spark Go (2023) device. These secret codes can be different phones as well as OS versions. In general, the code used for resetting Tecno Spark Go (2023) phones is *#*#2846579#*#*.

Steps to reset Tecno Spark Go (2023) phone using secret reset code

• Step 1. On your Tecno Spark Go (2023) phone, go to the dialer and type the code- *#*#2846579#*#*.
• Step 2. From the menu, click on the Restore Factory option.
• Step 3. Finally, to confirm the resetting of the Tecno Spark Go (2023) device, click on the OK button.

The above methods can also be tried if you get stuck in a situation on how to factory reset Tecno Spark Go (2023) tablets without password. Also, we recently covered a method of how to bypass the Google account on Tecno Spark Go (2023) after a factory reset, we have now had the opportunity to test this with many people with different models of Android and have found mixed results.

Conclusion

The above given are multiple options that can be used for resetting your Tecno Spark Go (2023) phone when you forget your device unlock password. Some of these solutions can be used for free and if they work, nothing like that. Dr.Fone – Screen Unlock (Android) is one of the best methods to reset your Tecno Spark Go (2023) device as it supports removing all types of screen locks in a hassle-free manner.

safe & secure

3 Solutions to Hard Reset Tecno Spark Go (2023) Phone Using PC

Find here 3 easy ways to hard reset Android using ADK or Android Device Manager from your PC. Also, do not forget to back up Android to PC before starting.

There are several cases when someone wants to know about how to hard reset an Android phone using PC. Such cases usually arise when your device is not accessible or stolen. It also involves situations when you forget the password or the unlock pattern of your device, or maybe your phone has frozen and is non-responsive. In such situations, it is very important to know how to reset Android phones to factory settings from the computer.

Factory reset will delete all your user data from internal storage. Thus it is also very important to back up all your internal data of the Tecno Spark Go (2023) device before you hard reset Android via PC. Moreover, a hard reset should be your last option at hand to revive your Android device. Hence, in this article for all the users out there, we have picked up the solution on how to factory reset Android Phone using PC.

You must ensure that all the steps are followed in sync so that the hard reset Android via PC is successful.

Part 1: Back up Android before hard reset

Since factory reset involves removing all data, adjusted settings and logged accounts from the Tecno Spark Go (2023) device; therefore, it is very important to back up all the data before moving on with the factory reset process. So, in this section, we will show you how to first back up your Android device using the Phone Backup . This is an easy-to-use and very convenient Android backup software that can be used to back up an Android device.

Wondershare Dr.Fone

Flexiblely Back up and Restore Android Data

• Back up Android data to the computer with one click.
• Preview and restore the backup to any Android device or iOS device.
• Supports 8000+ Android devices.
• There is no data lost during backup, export, or restoration.

3,981,454 people have downloaded it

Let’s have a look at the easy process to back up Android before the factory reset it.

Step 1: After installation completes, connect your Android device via data cable and go to “My Backup”. Then, this tool will automatically detect your device.

Step 2: You can now see the file types that will be backed up, such as Contacts, Messages, Calendars, Videos, etc.

Step 3: Click on “Backup pow”  to proceed with the process. The backup process will start, keeping connected the Tecno Spark Go (2023) device during the phone backup process.

Step 4: Within a few minutes, your whole device will be backed up. You can click “View Backups” to view all data that is backed up.

Phone Backup is one of the handiest and easy-to-use features within Wondershare Dr.Fone. Users can select their opted files manually to restore. This tool supports 8000+ Android devices worldwide. Users will feel safe and secure using this revolutionary software.

safe & secure

Part 2: Hard Reset Android using Dr.Fone - Screen Unlock (Android)

Dr.Fone - Screen Unlock (Android) is a user-friendly software tool that helps you unlock your Android device if you forget the passcode, pattern lock, PIN, or face/fingerprint lock. It supports various Android devices, allows you to bypass lock screens without data loss, and provides step-by-step instructions for easy unlocking. It also helps with FRP unlock and works on both Windows and Mac systems.

Step 1: Launch Dr.Fone - Screen Unlock on your computer and select “Screen Unlock” from the main interface. After that , you need to connect your Android phone to the computer using a USB cable.

Step 2: Choose “Android” > click “Unlock Android Screen” if you want to remove the lock screen. Choose your device brand. The hard reset methods vary for different device brands, so make sure that you choose the correct device brand.

Step 3: Put the Android phone into Specific mode with the help of Dr.Fone. And then, Dr.Fone will factory reset your Android phone within a few minutes. Now you can access your Android phone without a password!

safe & secure

In this process, we will learn how to hard reset Android phone to factory settings from a computer using SDK. This involves removing all data from the Tecno Spark Go (2023) device using a PC.

Follow the given steps to know how to hard reset an Android phone using PC.

Pre-Requirements

• PC that runs on Windows (Linux/Mac installer is also available)

• You have to download Android ADB tools on your computer. Android ADB Download: https://developer.android.com/studio
• A USB Cable to connect your Tecno Spark Go (2023) with your computer.

Steps to hard reset Android using SDK

Step 1: Enable USB Debugging in the Android settings. Open Settings>Developer options>USB Debugging. If developer options can’t be found on the Tecno Spark Go (2023) device, then please go to Settings > General > About phone > Common > Software info (tap on it 5-8 times).

Step 2: Install Android SDK Tools. Ensure that Platform-tools and USB drivers are selected in the SDK manager window.

Step 3: Ensure that the drivers for your Android are installed on your PC or at least the Generic drivers are present

Step 4: Connect the Tecno Spark Go (2023) device to the PC using a USB cable. Ensure that the Tecno Spark Go (2023) device is recognized in the Windows Device Manager.

Step 5: Open the command prompt in Windows and go to C:\Users\Your username\AppData\Local\Android\android-sdk\platform-tools

Step 6: Type ADB reboot recovery and the Tecno Spark Go (2023) device will restart. The recovery menu must appear after this

Step 7: The device can be disconnected now. Now, you can remove the password or simply Factory Reset the Tecno Spark Go (2023) device.

Now, you have successfully reset your device using a PC.

Although the first process is the easiest, in certain cases, you might have to look for other options too. Kindly follow the steps thoroughly and format your device with ease.

Part 4: Hard reset Android using Android Device Manager (Find My Device)

When someone loses their phone, or it is stolen, the two questions that commonly arise are: how to locate the phone? And if it is not possible, how to remotely wipe the phone’s data? People can use the Android Device Manager (also referred to as “Find My Device”) and do the exact two things. The best thing about this is that it doesn’t need to be installed as it is inbuilt on all Android Devices.

Let us look at the following steps to know how to reset Android phones to factory settings from the computer.

Requirements for Android Device Manager to Work:

• It must be activated in the Tecno Spark Go (2023) device administrator settings. Go to settings > Security > Device administrators and check whether ADM is enabled as a device administrator or not.
• The location of the Tecno Spark Go (2023) device must be ON
• The device must be signed in to a Google account
• The device must have an active internet connection
• The device should not be switched off
• Even if the Tecno Spark Go (2023) device is without SIM, the Google account must be active

Steps to use ADM to wipe or locate any Android Device:

Step 1: Directly go to the Android Device Manager website , and log in to your account. You will get three options: “Play Sound”, “Secure Device” and “Erase Device”.

Step 2: Click on the “Play Sound” option will make it raise the alarm, notifying of the location, you can easily locate your Android phone if it is nearby.

Step 3: Click “Secure Device”, you can remotely lock your device with a new passcode, display a custom message on the lock screen, and even track the Tecno Spark Go (2023) device’s location in real-time. It also gives you the option to add a contact number, so anyone who finds your device can reach out to you.

Step 4: Select “Erase Device” to reset your device. Once you select this option, the interface will take over and complete the job. Congratulations! You have successfully used the Android Device Manager (ADM) to reset your Android smartphone.

The Bottom Line

So these were the third different methods through which you can hard reset your Android device. Resetting the Tecno Spark Go (2023) device involves removing every data from the Tecno Spark Go (2023) device. The phone gets back to the same state as it was out of the box. Hence, most importantly, do not forget to back up data using Phone Backup and restore beforehand so that you do not end up losing anything important.

Also read: