5 Ways to Reset Tecno Spark 20C Without Volume Buttons

Sometimes, there may be a necessity to reset an Android device to its factory settings. Whether you wish to sell your device to someone else or unlock your device, you will most likely have to do a hard reset. Most Android devices can be reset easily by pressing a combination of volume and power buttons. But to hard reset Android tablet without volume buttons is a different ball game altogether and perhaps a lot more cumbersome. We are here to break that myth for you!

If the Android device is working well, to hard reset Android tablet without using the volume buttons won’t be much of a problem and can be done within just a few taps. But if the Tecno Spark 20C device is not functioning, it may pose a problem. That said, there are several methods to hard reset Android tablets without volume buttons. We have been able to list some of the easiest methods and describe them for you in the sections that follow. So read on to learn how to hard reset your Android device without volume buttons.

safe & secure

Part 1: Reset Android without volume buttons using Dr.Fone - Data Eraser (Android)

If you need to reset an Android device that doesn’t have functional volume buttons, Dr.Fone - Data Eraser (Android) can assist you in securely erasing all data and performing a reset. This software provides a reliable solution that doesn’t require volume buttons.

Before proceeding with the reset using Dr.Fone - Data Eraser (Android), carefully consider whether you still want to delete all data from your phone. Resetting will permanently erase all files, settings, and personal information on your device, and it cannot be undone. Therefore, it is important to back up any important data before performing the reset. If you are certain that you want to proceed with the reset using Dr.Fone, follow the steps below:

safe & secure

• Step 1: Download Wondershare Dr.Fone on your computer. Open the “Data Eraser” tool and connect your android device to the computer.

• Step 2: Click “Erase” to start erasing all data on the Android device. Think again about whether you want to delete all data and type “000000” to confirm.

• Step 3: Wait for the erase process to end, and you can view the erasure report to check the data type erased after erasing completes.

safe & secure

Part 2: Reset Android without volume button in recovery mode (need home button)

Resetting an Android smartphone or a tablet is not very hard, especially, if there is a home button on your device. A combination of few button presses including the home button will be the first step to the factory data resetting process. But if there are no physical volume buttons, the process may be quite different from the normal tablets. Only after booting your Android tablet into recovery mode, you will be able to hard reset Android tablet without volume buttons. To know how to reset an Android tablet without volume buttons, follow the steps described below. Remember that this method would only work if your Android device has a home button.

• Step 1: Press Power off + home button.

Press the power button until the options for Power off, Restart, and others appear. Now, tap on the “Power off” option and hold on to it while pressing the home button of your android device at the same time.

• Step 2: Confirm boot into safe mode.

Now, the screen for rebooting into safe mode will appear. Tap on “Yes” to enter the safe mode.

• Step 3: Enter recovery mode.

Press and hold the power button as well as the home button of your device simultaneously until a new screen appears. After it appears, release the two buttons and press the power button one more time. Now, press and hold down the home button. With that, you will enter into recovery mode and a new set of options will appear on the screen.

• Step 4: Navigate and do Factory Reset.

Using the home button to navigate, move down to the “Wipe data/factory reset” option. Press the power button to select the option.

You may have to confirm your choice by selecting “Yes”.

• Step 5: Reboot your device.

After the reset is complete, navigate to the “reboot system now” option and select it to reboot your device. At the end of this process, your device will be reset.

Part 3: Reset Android with the reset pinhole

There are many reasons for opting to reset an Android smartphone or tablet. Sometimes, a forgotten password might get your tablet locked. At times, the screen of your smartphone or tablet might get stuck and fail to respond. Or your device might come with a non-removable battery to make matters worse. For all these problems and many others, you might want to reset your device. But if your device does not come with a home button or volume buttons, you might want to use a different method. Generally, such devices come with a reset pinhole on the Tecno Spark 20C device which can be used to reset the Tecno Spark 20C device. To perform a tablet hard reset without the volume button, follow the simple steps described below.

• Step 1: Find the Reset pinhole.

Look for a very small opening on the back panel or the bezels of a smartphone. Usually, such pinholes are marked “Reset” or “Reboot” and are available on the top left side of the back panel. But be careful not to mistake it with the microphone as using it for resetting your gadget may damage the small microphone permanently and lead to other complications.

• Step 2: Insert a pin into the hole.

After locating it, insert a stretched paperclip or a small pin into the hole and press it for a few seconds.

Now all the data in your Android device will be reset. After this, you can continue to use your device normally without any problem.

Part 4: Reset Android from Settings (phone works normally)

If your Android tablet or smartphone is functioning normally, your device can be reset to the factory settings using just your device itself. Even if your device does not have a home button or volume control buttons, this method will be applicable and can be used to reset the Tecno Spark 20C device. But before using this method to reset your Android device, make sure to back up all the necessary information that you have on your device. You can also sync all the important files to the cloud using your Google account. Also, it is necessary to keep in mind that this procedure will remove all the accounts into which your device is signed in. To know how to reset an Android tablet without volume button, read on.

• Step 1: Open the Settings app.

Tap on the Settings app in the app section of your device to open it.

• Step 2: Select the Data Reset folder.

After that, navigate or scroll down until you can find the “Backup and Reset” option. Tap on it to open the folder.

• Step 3: Tap on Factory data reset.

Now swipe down to find the “Factory data reset” option and tap on it. A new screen will appear, requesting you for confirmation to proceed with the process. Tap on “Reset device” to start the process.

At the end of the process, your device will be reset and ready to use after it completes the mandatory reboot.

Part 5: Reset Android tablet to unlock Android using Dr.Fone - Screen Unlock (Android)

If you are facing the challenge of resetting an Android tablet to unlock the lock screen, the easiest way is to use a dedicated tool. Dr.Fone - Screen Unlock (Android) is recommended in this case. It is a helpful software that provides a solution to bypass screen lock and perform a reset on your Android tablet.

Click here

Dr.Fone - Screen Unlock (Android)

The Best Tool to Reset Android and Solve Your Screen Locks

• Reset Android tablets or phones when the Tecno Spark 20C device is locked or without a volume button.
• Bypass the FRP lock of Tecno Spark 20C without a PIN or Google account.
• Support most mainstream Android models like Tecno Spark 20C, Tecno Spark 20C, Xiaomi, etc.
• Everyone can handle the lock screen without any tech knowledge.

3,724,689 people have downloaded it

Here are the steps about how to reset Android to unlock lock screen.

• Step 1: Launch Dr.Fone - Screen Unlock (Android) and connect your Android device.

First, install and launch Wondershare Dr.Fone on your computer. Select the “Screen Unlock” option from the main interface and then click “Android” > “Unlock Android Screen”. Using a USB cable, connect your Android tablet to the computer.

• Step 2: Select your device brand and follow the guide to restart your device.

Dr.Fone will ask you to select your device brand and display the specific way to restart the Tecno Spark 20C device. You need to select your device brand in this step because the unlock way of different device brands is different. And then follow the instructions to restart your device.

• Step 3: The lock screen of your device is removed.

Wait for the reboot process to complete, and then you can access the phone or tablet without the password.

Conclusion

So these are the methods with which you can do a reset without using volume buttons. The difficulty level of the methods depends on the type and brand of the Android device. The first two parts can be performed easily by anyone, and that too in a matter of a few minutes. However, the third method may pose some difficulty, particularly because manufacturers set different key combinations for rebooting the Tecno Spark 20C device into recovery. Nevertheless, once it is figured out, the rest is easy. Hence, it is up to you to decide on the method to be adopted for hard resetting your Android device.

safe & secure

Is your Tecno Spark 20C working too slow? Here’s how you can hard reset it

If Tecno Spark 20C 3.4 hard reset or Tecno Spark 20C hard reset is the only option for your mobile phone, you can perform a factory reset to make your device function as it did on the first day. You may need a hard reset if it works slowly, hangs, you want to bypass screen lock, your memory is full, and you want to erase everything, you want to sell or give your device away, and you don’t want anyone to be able to access your files or passwords.

The following instructions will show you how to completely wipe up all of your data and restore the Tecno Spark 20C to its factory-fresh condition.

Part 1: Why do I Need to Hard Reset My Tecno Spark 20C?

We advise you to remove all accounts from the Tecno Spark 20C device before performing a factory reset, especially if you plan to sell, give away, or donate the 3.4. It is also a good idea to unlink the Google account. By doing this, we can prevent issues for new users as some more recent smartphones have a feature called FRP, or Factory Reset Protection, which requires the Google account or PIN number that was originally used to set up the Tecno Spark 20C when a device is factory restored.

Part 2: How to Hard Reset My Tecno Spark 20C

1. Fastboot Mode

• Shut down your phone.
• Add a USB cord to your computer or laptop.
• Your phone should now start up in Fastboot Mode after you press and hold the Volume Down + Power buttons for a few seconds. Tecno Spark 20C Recovery Mode and Fastboot Mode
• Using the ADB command, start Tecno Spark 20C in Bootloader Mode or Fastboot Mode.
• If your computer has ADB and Fastboot drivers installed, and your phone has USB debugging turned on, execute the command below after connecting it.
• Launch Command Prompt (CMD) on your PC, then type the command listed below.

reboot bootloader using adb

• After some time, you will see that your Tecno Spark 20C has been hard reset.

2. Hard reset with hardware key button

• Choose “wipe data/factory reset” on your Tecno Spark 20C to do a hard reset. Scroll down with the Volume buttons, and press the Power key to agree.
• Next, choose yes from the menu if further confirmation is required, and then click the Power button once.
• Lastly, press the Power key and choose the Reboot system.
• Do not forget to charge your phone.
• Initially, turn off your phone.
• Now Press the Volume Up + Power key for a few seconds to enter recovery mode.
• Press and hold the Power and Volume Up buttons at the same time until the Tecno Spark 20C device vibrates. Release all the presses if the Tecno Spark 20C logo or Recovery screen shows.
• You can give your phone up to 30 seconds to display the recovery screen.

Bonus Tips

Dr.Fone - Data Eraser (delete all data completely)

Dr.Fone - Data Eraser helps you quickly get rid of all the unwanted information and all of your data however it is always advisable to back it up using the Dr.Fone - Phone Backup.

Let’s see how you can delete completely all the data using Dr.Fone - Data Eraser. do not worry the next section is about how you can back up and restore the data before erasing it completely using Dr.Fone - Phone Backup.

Step 1: Connect your Tecno Spark 20C smartphone to your computer. Start Dr.Fone on your computer. Select “Data Eraser” from the tool list.

Connect your Tecno Spark 20C to the PC via a USB wire. Ensure that your phone has USB debugging turned on. You will see a pop-up window on your phone asking you to approve USB debugging.

Step 2: Begin wiping your Tecno Spark 20C phone.

Dr.Fone will then automatically recognize and connect to your Tecno Spark 20C smartphone. To begin wiping all of your data, select “Erase All Data.”.

Before proceeding, ensure that you have backed up any critical data because deleted data cannot be retrieved. After that, type “000000” to confirm your activity.

Dr. Fone will next proceed to wipe the data on your Tecno Spark 20C phone. The entire procedure takes only a few minutes. Turn off the phone and do not run any phone administration programs on the PC.

Step 3: Reset your phone’s factory data.

Once all app data, photos, and other private data have been completely erased, Dr.Fone will advise you to touch on Factory Data Reset or Erase All Data on the phone. You may use this to completely delete the phone’s settings.

Your Tecno Spark 20C phone has now been completely wiped, giving it the appearance of being brand new.

safe & secure

Dr.Fone - Phone Backup (easy backup before a new hard reset)

Step 1: Connect your Tecno Spark 20C phone to your PC.

Launch Dr.Fone on your PC and choose “Phone Backup” from the list of options.

Then, connect your Tecno Spark 20C phone to the computer using a USB cord. Please ensure that the phone is in USB debugging mode. If your Tecno Spark 20C version is 4.2.2 or higher, a pop-up window on the Tecno Spark 20C phone will prompt you to accept USB Debugging. Please press the OK button.

To begin backing up the data on your Tecno Spark 20C phone, click Backup.

If you have previously used this application to back up your device, you may examine your backup history by clicking on “View backup history.”

Step 2: Choose which file types to back up.

After connecting the Tecno Spark 20C phone, pick the file types you wish to back up. Dr.Fone has already tested all of the file kinds for you. Then, to begin the backup process, click Backup.

The backup will take a few moments. Please do not detach your Tecno Spark 20C phone, use it, or erase any data from it during the backup process.

When the backup is finished, you can view the contents of the backup file by clicking the View the backup button.

safe & secure

The Bottom Line

Now that you know how to hard reset Tecno Spark 20C it is time to implement all the possible ways and see which one works for you. We also recommend you to proceed with backing up and restoration of all the information so that you will not have to repent in the end. It is all about using smart tools like Dr.Fone - Data Eraser and Dr.Fone - Phone Backup.

The Easiest Methods to Hard Reset Tecno Spark 20C

You can use Tecno Spark 20C A37 hard reset to solve your various smartphone problems. If your Tecno Spark 20C runs slower and its screen gets stuck, a hard reset can clear these problems. A hard reset also helps when you want to erase all data from your device before you sell. Suppose your phone runs out of storage. You can save your data on cloud storage and do a factory reset to free up space. You can also use it to unlock your device by removing the screen lock.

When you do a factory reset from settings, you will need the Tecno Spark 20C device’s password. Dr.Fone is the best tool to hard reset your Tecno Spark 20C without a password. It has an easy-to-use UI, and safe data backup features to enable users to back up their data before resetting. Here is the complete guide to hard reset your Tecno Spark 20C using three methods.

Part 1: In What Cases Should I Hard Reset My Tecno Spark 20C?

1: Can’t Unlock it (forgot password, too many wrong attempts)

Most people hard reset Tecno Spark 20C because they forgot the lock screen password. When you can’t remember your phone’s password, a hard reset is the fastest way to unlock your device. With a hard reset, you can delete all types of data and settings from your device. It helps you remove passwords, PINs, patterns, and fingerprint locks. Once you forget your phone’s password and enter the wrong password too many times, you will get a blocking alert. After another wrong attempt, the system will block your device. When you reach this point, you can only use a hard reset to unlock your device.

2: Tecno Spark 20C Works too Slowly

If your Tecno Spark 20C works slowly, such as taking time when you open any app, you can use a hard reset to fix this problem. When you are using a smartphone, you can easily find out if it’s working slower or not. If your device takes time to load games or shows lag when you watch videos, you can do a hard reset to clear its storage. When you reset Tecno Spark 20C, you clear its storage and cache, which helps your device work faster. It also removes junk files from your device.

3: Constant Crashes

Suppose your phone constantly crashes for no reason at all. Chances are that there is some problem with its software or new updates. When your device crashes, the screen gets stuck for some seconds before it automatically recovers. If it happens once in a while, then it is not a big problem. But, if it happens constantly, then you will need to fix your device before it gets even worse. An Tecno Spark 20C hard reset reverts it to its factory settings by deleting all data, personalization, settings, and updates. Doing so removes any type of threat and bug from your device.

Part 2: What to do to Hard Reset Tecno Spark 20C? 3 Easiest Ways for You

1: Hard Reset from Settings (password/pattern Needed)

The fastest way to hard reset Tecno Spark 20C is to use the factory reset option from settings. Although you don’t need a third-party tool for this method, it requires the Tecno Spark 20C device’s password or pattern. You can’t use this method on a locked Tecno Spark 20C device. Suppose your phone has some issues like slow working, frozen screen, app crashes, or keeps rebooting. In these situations, the Tecno Spark 20C hard reset is the best solution. Before factory resetting your device, create a data backup to recover it afterward. Here are the steps to hard reset Tecno Spark 20C from settings.

• Power on your Tecno Spark 20C and open “Settings.”
• Select “General Management” and tap on the “Backup and Reset” option.
• Now, select the “Factory Data Reset” option from the backup and reset menu.
• Tap on the “Reset Device/Reset Phone” option.
• Next, select the “Erase Everything” option and enter your phone’s password.
• Your device will automatically reboot after the factory reset is complete.

2: Enter Recovery Mode

You can hard reset Tecno Spark 20C by entering the recovery mode if you forgot your phone’s password. You can use this method in case your device is locked, and you can’t reach the settings menu to do a simple factory reset. It also helps if your phone is stuck at the boot logo and keeps rebooting. You will lose all your data with a hard reset from recovery mode. Only do a hard reset if you know your Google account and password. Because after the reset is complete, the system will ask you to unlock FRP. Here are the steps to hard reset your Tecno Spark 20C with recovery mode.

• Power off your Tecno Spark 20C with the power key, and make sure that you have at least 50% battery backup.
• Next, hold the volume down + power keys at the same time till the Tecno Spark 20C logo appears on the screen.
• Release both keys when you see the Tecno Spark 20C logo. After that, press the volume up key to enter the recovery mode.
• Scroll down to the “Wipe Data/ Factory Reset” option in the recovery menu using the volume keys. Select it by pressing the power key.
• Confirm your choice by selecting the “Yes” and “Delete all Data” options.
• After the process ends, select “Reboot System Now” and wait for your smartphone to restart.

3: Dr.Fone - Data Eraser (only for deleting data)

If you want to permanently wipe all data and settings from your Tecno Spark 20C, you can use Dr.Fone - Data Eraser. When your device is running out of storage or working slower, you can erase all of its data to fix these problems. Before you erase data from your device, you can use Dr.Fone to create a data backup with contacts, files, images, and your other personal data. This way, after erasing everything, you can easily recover anything you want. Dr.Fone is the best third-party tool with efficient solutions for any smartphone problem. You can use Dr.Fone to unlock devices, transfer WhatsApp, system repair, virtual location, and Data Backup & Reset. Follow these steps to hard reset Tecno Spark 20C with Dr.Fone - Data Eraser.

Dr.Fone - Data Eraser (Android)

Hard Reset Oppo A37 Without Any Hassle!

• Simple, click-through process.
• Wipe your Android completely and permanently.
• Erase photos, contacts, messages, call logs, and all private data.
• Supports all Android devices available in the market.

3,762,641 people have downloaded it

• Download and install Wondershare Dr.Fone on your PC. Launch the application and click on the “Data Eraser” tab on the main screen.

• Enable USB debugging on your mobile phone and connect it to your PC via a USB cable.

• After the connection is complete, Dr.Fone will recognize your smartphone and open the “Erase All Data” screen. Click on the “Start” option to continue.

• Next, type the code that appears on the screen for confirmation. After you enter the code, Dr.Fone will start erasing data from your device.

• Once the process ends, Dr.Fone will ask you to tap on the “Factory Reset” option on your smartphone. It will erase all settings and complete the factory reset.

safe & secure

Conclusion

Let’s end our guide for the easiest ways to hard reset Tecno Spark 20C. You can do a factory reset if you know your phone’s password. If you don’t know the password, you can do a hard reset from recovery mode. The safest and fastest way to erase all data from your device is by using Dr.Fone - Data Eraser. With Dr.Fone, you don’t have to follow complex steps, and you can back up your data so you can recover it after the reset is complete. Aside from that, you can use Dr.Fone to unlock your device without a password.