5 Ways to Reset Lava Blaze 2 5G Without Volume Buttons

Sometimes, there may be a necessity to reset an Android device to its factory settings. Whether you wish to sell your device to someone else or unlock your device, you will most likely have to do a hard reset. Most Android devices can be reset easily by pressing a combination of volume and power buttons. But to hard reset Android tablet without volume buttons is a different ball game altogether and perhaps a lot more cumbersome. We are here to break that myth for you!

If the Android device is working well, to hard reset Android tablet without using the volume buttons won’t be much of a problem and can be done within just a few taps. But if the Lava Blaze 2 5G device is not functioning, it may pose a problem. That said, there are several methods to hard reset Android tablets without volume buttons. We have been able to list some of the easiest methods and describe them for you in the sections that follow. So read on to learn how to hard reset your Android device without volume buttons.

safe & secure

Part 1: Reset Android without volume buttons using Dr.Fone - Data Eraser (Android)

If you need to reset an Android device that doesn’t have functional volume buttons, Dr.Fone - Data Eraser (Android) can assist you in securely erasing all data and performing a reset. This software provides a reliable solution that doesn’t require volume buttons.

Before proceeding with the reset using Dr.Fone - Data Eraser (Android), carefully consider whether you still want to delete all data from your phone. Resetting will permanently erase all files, settings, and personal information on your device, and it cannot be undone. Therefore, it is important to back up any important data before performing the reset. If you are certain that you want to proceed with the reset using Dr.Fone, follow the steps below:

safe & secure

• Step 1: Download Wondershare Dr.Fone on your computer. Open the “Data Eraser” tool and connect your android device to the computer.

• Step 2: Click “Erase” to start erasing all data on the Android device. Think again about whether you want to delete all data and type “000000” to confirm.

• Step 3: Wait for the erase process to end, and you can view the erasure report to check the data type erased after erasing completes.

safe & secure

Part 2: Reset Android without volume button in recovery mode (need home button)

Resetting an Android smartphone or a tablet is not very hard, especially, if there is a home button on your device. A combination of few button presses including the home button will be the first step to the factory data resetting process. But if there are no physical volume buttons, the process may be quite different from the normal tablets. Only after booting your Android tablet into recovery mode, you will be able to hard reset Android tablet without volume buttons. To know how to reset an Android tablet without volume buttons, follow the steps described below. Remember that this method would only work if your Android device has a home button.

• Step 1: Press Power off + home button.

Press the power button until the options for Power off, Restart, and others appear. Now, tap on the “Power off” option and hold on to it while pressing the home button of your android device at the same time.

• Step 2: Confirm boot into safe mode.

Now, the screen for rebooting into safe mode will appear. Tap on “Yes” to enter the safe mode.

• Step 3: Enter recovery mode.

Press and hold the power button as well as the home button of your device simultaneously until a new screen appears. After it appears, release the two buttons and press the power button one more time. Now, press and hold down the home button. With that, you will enter into recovery mode and a new set of options will appear on the screen.

• Step 4: Navigate and do Factory Reset.

Using the home button to navigate, move down to the “Wipe data/factory reset” option. Press the power button to select the option.

You may have to confirm your choice by selecting “Yes”.

• Step 5: Reboot your device.

After the reset is complete, navigate to the “reboot system now” option and select it to reboot your device. At the end of this process, your device will be reset.

Part 3: Reset Android with the reset pinhole

There are many reasons for opting to reset an Android smartphone or tablet. Sometimes, a forgotten password might get your tablet locked. At times, the screen of your smartphone or tablet might get stuck and fail to respond. Or your device might come with a non-removable battery to make matters worse. For all these problems and many others, you might want to reset your device. But if your device does not come with a home button or volume buttons, you might want to use a different method. Generally, such devices come with a reset pinhole on the Lava Blaze 2 5G device which can be used to reset the Lava Blaze 2 5G device. To perform a tablet hard reset without the volume button, follow the simple steps described below.

• Step 1: Find the Reset pinhole.

Look for a very small opening on the back panel or the bezels of a smartphone. Usually, such pinholes are marked “Reset” or “Reboot” and are available on the top left side of the back panel. But be careful not to mistake it with the microphone as using it for resetting your gadget may damage the small microphone permanently and lead to other complications.

• Step 2: Insert a pin into the hole.

After locating it, insert a stretched paperclip or a small pin into the hole and press it for a few seconds.

Now all the data in your Android device will be reset. After this, you can continue to use your device normally without any problem.

Part 4: Reset Android from Settings (phone works normally)

If your Android tablet or smartphone is functioning normally, your device can be reset to the factory settings using just your device itself. Even if your device does not have a home button or volume control buttons, this method will be applicable and can be used to reset the Lava Blaze 2 5G device. But before using this method to reset your Android device, make sure to back up all the necessary information that you have on your device. You can also sync all the important files to the cloud using your Google account. Also, it is necessary to keep in mind that this procedure will remove all the accounts into which your device is signed in. To know how to reset an Android tablet without volume button, read on.

• Step 1: Open the Settings app.

Tap on the Settings app in the app section of your device to open it.

• Step 2: Select the Data Reset folder.

After that, navigate or scroll down until you can find the “Backup and Reset” option. Tap on it to open the folder.

• Step 3: Tap on Factory data reset.

Now swipe down to find the “Factory data reset” option and tap on it. A new screen will appear, requesting you for confirmation to proceed with the process. Tap on “Reset device” to start the process.

At the end of the process, your device will be reset and ready to use after it completes the mandatory reboot.

Part 5: Reset Android tablet to unlock Android using Dr.Fone - Screen Unlock (Android)

If you are facing the challenge of resetting an Android tablet to unlock the lock screen, the easiest way is to use a dedicated tool. Dr.Fone - Screen Unlock (Android) is recommended in this case. It is a helpful software that provides a solution to bypass screen lock and perform a reset on your Android tablet.

Dr.Fone - Screen Unlock (Android)

The Best Tool to Reset Android and Solve Your Screen Locks

• Reset Android tablets or phones when the Lava Blaze 2 5G device is locked or without a volume button.
• Bypass the FRP lock of Lava Blaze 2 5G without a PIN or Google account.
• Support most mainstream Android models like Lava Blaze 2 5G, Lava Blaze 2 5G, Xiaomi, etc.
• Everyone can handle the lock screen without any tech knowledge.

3,724,689 people have downloaded it

Here are the steps about how to reset Android to unlock lock screen.

• Step 1: Launch Dr.Fone - Screen Unlock (Android) and connect your Android device.

First, install and launch Wondershare Dr.Fone on your computer. Select the “Screen Unlock” option from the main interface and then click “Android” > “Unlock Android Screen”. Using a USB cable, connect your Android tablet to the computer.

• Step 2: Select your device brand and follow the guide to restart your device.

Dr.Fone will ask you to select your device brand and display the specific way to restart the Lava Blaze 2 5G device. You need to select your device brand in this step because the unlock way of different device brands is different. And then follow the instructions to restart your device.

• Step 3: The lock screen of your device is removed.

Wait for the reboot process to complete, and then you can access the phone or tablet without the password.

Conclusion

So these are the methods with which you can do a reset without using volume buttons. The difficulty level of the methods depends on the type and brand of the Android device. The first two parts can be performed easily by anyone, and that too in a matter of a few minutes. However, the third method may pose some difficulty, particularly because manufacturers set different key combinations for rebooting the Lava Blaze 2 5G device into recovery. Nevertheless, once it is figured out, the rest is easy. Hence, it is up to you to decide on the method to be adopted for hard resetting your Android device.

safe & secure

All About Factory Reset, What Is It and What It Does to Your Lava Blaze 2 5G?

I bought a new phone and want to sell my old Lava Blaze 2 5G 3, so I need to clear my data off it. Can someone guide me on how to factory reset the Lava Blaze 2 5G 3 so I can sell it?

As we all know, force restart and even factory reset can resolve many problems on our phones. Sometimes when you want to sell your old phone, you need to factory reset it to clear your data off it. Also, if there is some issue like a screen lock, you can factory reset it to unlock your phone. But do you know how to do a factory reset Lava Blaze 2 5G 3 correctly?

Therefore, we have gathered all that you need to know about a factory reset. After going through this article, you can factory reset Lava Blaze 2 5G phones. So, keep following to resolve your Lava Blaze 2 5G issues.

Part 1: What is Lava Blaze 2 5G Factory Reset?

Principles of Lava Blaze 2 5G Factory Reset

Before you reset your Lava Blaze 2 5G phone, you must ensure your data is all backed up someplace. It can be either on another device or transferred to the cloud. While changing your phone, you can exchange data from your old Lava Blaze 2 5G without much stretch. If you own a Lava Blaze 2 5G, a large portion of your data is put away securely in servers.

One way or another, you must twofold check these things before a factory reset:

• Google ID
• Contacts
• Pictures Gallery
• Passwords
• Music

Steps to Start Lava Blaze 2 5G Factory Reset

Now is the right time to factory reset Lava Blaze 2 5G when you have everything backed up. The following steps will help you factory reset your Lava Blaze 2 5G:

• On your Lava Blaze 2 5G, head into the settings application. Look over right down and search for System and click it. Look down and search for Reset options.

• Go to System and tap the “Erase all data” option.

• Note: After tapping this, the following page will allow you to see what will be cleaned from the Lava Blaze 2 5G device. Make sure everything is covered in your backup.
• Pick whether you need to delete any downloaded SIMs and tap Erase all data.

• You might need to enter your password to complete the reset.

Differences Between Hard Reset and Factory Reset

A factory reset deletes everything from your Lava Blaze 2 5G device. You might utilize a factory reset when your phone could have a virus or when it is seriously breaking down. A factory reset returns your Lava Blaze 2 5G to its factory settings, driving you to set it up again as a new phone.

A hard reset is a basic rebooting of your cell phone. It doesn’t influence the data on your Lava Blaze 2 5G. You might utilize a hard reset when your Lava Blaze 2 5G is acting slow. However, it is different from a standard reboot of your Lava Blaze 2 5G.

Part 2: What can Lava Blaze 2 5G Factory Reset do?

A factory reset deletes every user information, application, related application data, and settings on your pixel phone. It is like hard drive reformatting in a PC. However, a factory reset fixes different hardware and software-related issues. It also unlocks your phone in case you forget your lock screen password, or you need to factory reset Lava Blaze 2 5G before selling it to protect your privacy.

Part 3: 2 Easy Ways to improve your Lava Blaze 2 5G Factory Reset

1. Dr.Fone - Data Eraser

You can use Dr.Fone Data Eraser to reset your Lava Blaze 2 5G phone within minutes. Whether you need to sell your old Lava Blaze 2 5G or want to make it look like a new one, you can delete its files with Dr.Fone - Data Eraser. All private data and downloads are taken out. Moreover, you can delete your Lava Blaze 2 5G even if its software is corrupted. Additionally, you can erase specific documents on your Lava Blaze 2 5G also. The other Lava Blaze 2 5G data and settings will be protected in this case. So, here is the Wondershare Dr.Fone step-by-step guide to doing so:

safe & secure

• Launch the Wondershare Dr.Fone software and click the “Data Eraser” from the main window.

• Connect your Lava Blaze 2 5G and PC using a connector. Please make sure that USB Debugging is on in your Lava Blaze 2 5G.

• The software will automatically read your Lava Blaze 2 5G phone and start to erase your files. Click “Erase All Data.”

• Type in “000000” to affirm your activity and continue.

• Then, at that point, Dr.Fone will ask you to click the Factory Reset option on your Lava Blaze 2 5G. You can also select “Erase All Data” to reset your Lava Blaze 2 5G.

2. Dr.Fone - Phone Backup

As we mentioned before, we recommend you back up your files before a factory reset. You can use Dr.Fone - Phone Backup (Android) to back up data without any hassle and data loss. With this tool, backing up your Lava Blaze 2 5G has never been simpler. The program makes it simple to back up your Lava Blaze 2 5G data to the PC and recover supporting data for your Android gadget. Now let’s find out how you can back up and upload your Lava Blaze 2 5G files.

safe & secure

• Open Dr.Fone Phone Backup on your PC, and select the “Phone Backup” option.

• Connect your Lava Blaze 2 5G and PC through a USB connector. However, make sure to permit USB Debugging on your Lava Blaze 2 5G.

• Click “Backup” to begin the backup of Lava Blaze 2 5G data.
• After the connection, select the File types you need to upload. Of course, Dr.Fone has checked all the document types for you. Then click on backup to begin the process. It will require a short time. Kindly don’t detach your Lava Blaze 2 5G nor use it during the backup.

• After the backup is finished, you can tap on the “View the Backup” button to see what’s in the document.

The Bottom Line

Factory resetting is not ideal for some problems, but sometimes it becomes the only possible solution. So, if you have your phone stuck or want to sell your old phone, you need to factory reset Lava Blaze 2 5G. But make sure to back up your phone before going for a reset. You can back up your files before a factory reset using Dr.Fone - Phone Backup (Android).

safe & secure

Is your Lava Blaze 2 5G working too slow? Here’s how you can hard reset it

If Lava Blaze 2 5G 3.4 hard reset or Lava Blaze 2 5G hard reset is the only option for your mobile phone, you can perform a factory reset to make your device function as it did on the first day. You may need a hard reset if it works slowly, hangs, you want to bypass screen lock, your memory is full, and you want to erase everything, you want to sell or give your device away, and you don’t want anyone to be able to access your files or passwords.

The following instructions will show you how to completely wipe up all of your data and restore the Lava Blaze 2 5G to its factory-fresh condition.

Part 1: Why do I Need to Hard Reset My Lava Blaze 2 5G?

We advise you to remove all accounts from the Lava Blaze 2 5G device before performing a factory reset, especially if you plan to sell, give away, or donate the 3.4. It is also a good idea to unlink the Google account. By doing this, we can prevent issues for new users as some more recent smartphones have a feature called FRP, or Factory Reset Protection, which requires the Google account or PIN number that was originally used to set up the Lava Blaze 2 5G when a device is factory restored.

Part 2: How to Hard Reset My Lava Blaze 2 5G

1. Fastboot Mode

• Shut down your phone.
• Add a USB cord to your computer or laptop.
• Your phone should now start up in Fastboot Mode after you press and hold the Volume Down + Power buttons for a few seconds. Lava Blaze 2 5G Recovery Mode and Fastboot Mode
• Using the ADB command, start Lava Blaze 2 5G in Bootloader Mode or Fastboot Mode.
• If your computer has ADB and Fastboot drivers installed, and your phone has USB debugging turned on, execute the command below after connecting it.
• Launch Command Prompt (CMD) on your PC, then type the command listed below.

reboot bootloader using adb

• After some time, you will see that your Lava Blaze 2 5G has been hard reset.

2. Hard reset with hardware key button

• Choose “wipe data/factory reset” on your Lava Blaze 2 5G to do a hard reset. Scroll down with the Volume buttons, and press the Power key to agree.
• Next, choose yes from the menu if further confirmation is required, and then click the Power button once.
• Lastly, press the Power key and choose the Reboot system.
• Do not forget to charge your phone.
• Initially, turn off your phone.
• Now Press the Volume Up + Power key for a few seconds to enter recovery mode.
• Press and hold the Power and Volume Up buttons at the same time until the Lava Blaze 2 5G device vibrates. Release all the presses if the Lava Blaze 2 5G logo or Recovery screen shows.
• You can give your phone up to 30 seconds to display the recovery screen.

Bonus Tips

Dr.Fone - Data Eraser (delete all data completely)

Dr.Fone - Data Eraser helps you quickly get rid of all the unwanted information and all of your data however it is always advisable to back it up using the Dr.Fone - Phone Backup.

Let’s see how you can delete completely all the data using Dr.Fone - Data Eraser. do not worry the next section is about how you can back up and restore the data before erasing it completely using Dr.Fone - Phone Backup.

Step 1: Connect your Lava Blaze 2 5G smartphone to your computer. Start Dr.Fone on your computer. Select “Data Eraser” from the tool list.

Connect your Lava Blaze 2 5G to the PC via a USB wire. Ensure that your phone has USB debugging turned on. You will see a pop-up window on your phone asking you to approve USB debugging.

Step 2: Begin wiping your Lava Blaze 2 5G phone.

Dr.Fone will then automatically recognize and connect to your Lava Blaze 2 5G smartphone. To begin wiping all of your data, select “Erase All Data.”.

Before proceeding, ensure that you have backed up any critical data because deleted data cannot be retrieved. After that, type “000000” to confirm your activity.

Dr. Fone will next proceed to wipe the data on your Lava Blaze 2 5G phone. The entire procedure takes only a few minutes. Turn off the phone and do not run any phone administration programs on the PC.

Step 3: Reset your phone’s factory data.

Once all app data, photos, and other private data have been completely erased, Dr.Fone will advise you to touch on Factory Data Reset or Erase All Data on the phone. You may use this to completely delete the phone’s settings.

Your Lava Blaze 2 5G phone has now been completely wiped, giving it the appearance of being brand new.

safe & secure

Dr.Fone - Phone Backup (easy backup before a new hard reset)

Step 1: Connect your Lava Blaze 2 5G phone to your PC.

Launch Dr.Fone on your PC and choose “Phone Backup” from the list of options.

Then, connect your Lava Blaze 2 5G phone to the computer using a USB cord. Please ensure that the phone is in USB debugging mode. If your Lava Blaze 2 5G version is 4.2.2 or higher, a pop-up window on the Lava Blaze 2 5G phone will prompt you to accept USB Debugging. Please press the OK button.

To begin backing up the data on your Lava Blaze 2 5G phone, click Backup.

If you have previously used this application to back up your device, you may examine your backup history by clicking on “View backup history.”

Step 2: Choose which file types to back up.

After connecting the Lava Blaze 2 5G phone, pick the file types you wish to back up. Dr.Fone has already tested all of the file kinds for you. Then, to begin the backup process, click Backup.

The backup will take a few moments. Please do not detach your Lava Blaze 2 5G phone, use it, or erase any data from it during the backup process.

When the backup is finished, you can view the contents of the backup file by clicking the View the backup button.

safe & secure

The Bottom Line

Now that you know how to hard reset Lava Blaze 2 5G it is time to implement all the possible ways and see which one works for you. We also recommend you to proceed with backing up and restoration of all the information so that you will not have to repent in the end. It is all about using smart tools like Dr.Fone - Data Eraser and Dr.Fone - Phone Backup.