How do I reset my Samsung Galaxy XCover 7 Phone without technical knowledge?

Resetting a Samsung Galaxy XCover 7 smartphone to factory settings could be necessary. You will probably need to do a hard reset if you want to unlock your smartphone or sell it to someone else. The majority of Samsung Galaxy XCover 7 devices may be quickly reset simply by pushing the volume and power buttons together. However, hard resetting a Samsung Galaxy XCover 7 sometimes is a whole other situation and may be much more difficult. That myth will be dispelled for you by us!

If the Samsung Galaxy XCover 7 device is functioning properly, hard resetting a Samsung Galaxy XCover 7 tablet without volume buttons won’t be too difficult and can be completed in a matter of taps. However, if the apparatus is broken, it may be an issue. Let’s have a look at all the possibilities.

Part 1: 4 Easy solutions to hard reset your Samsung Galaxy XCover 7

1. From recovery mode to delete all data

It’s not particularly difficult to reset a Samsung Galaxy XCover 7 smartphone or tablet, especially if it has a home button. You can only do a hard reset on a Samsung Galaxy XCover 7 tablet without volume buttons after entering recovery mode. Follow the procedures outlined below to learn how to reset a Samsung Galaxy XCover 7 tablet without volume buttons.

Step 1: First, press the power off and home buttons.

Press the power button repeatedly until the Power off, Restart, and other choices are shown. Now, choose “Power Off” and hold it down while tapping your phone’s home button.

At the same time, the Samsung Galaxy XCover 7 device.

Step 2: Verify the safe mode bootup.

The screen for restarting in safe mode will now show up. To switch to safe mode, select “Yes.”

Step 3: Switch to recovery mode

Your device’s power and home buttons must be pressed and held simultaneously until a new screen shows. Release the two buttons once it appears, then press the power button one more. Press and hold the home button for a moment. With that, recovery mode will start, and a new set of choices will show up on the screen.

Step 4: Select “Factory Reset” and navigate

Navigate down to the “Wipe data/factory reset” option using the home button. To choose the choice, press the power button.

2. Use the factory reset code to wipe data in Samsung Galaxy XCover 7

Step 1: Press the Volume Up + Power Keys at the same time as turning off your smartphone and removing the SIM card.

Step 2: The Samsung Galaxy XCover 7 logo will appear when the phone boots. Keep none of the keys.

Step 3: Scroll down to the Wipe Data / Factory Reset option using the volume down key.

Step 4: If you want to say “OK” and reset, press the Power Key.

To delete all user data, click “Yes.”

Step 5: The factory data reset process will begin on the phone.

After formatting is finished, click “Reboot System Now.”

3. Google Find My Device

Finding My Device:

Go to www.google.com/android/find on your computer’s web browser and sign in with the same Google Account you used on your phone.

When your phone is located, Find My Device will provide specific location information.

Do any of the following:

• If you’ve merely lost your phone, click Play sound to make it ring.
• If you’re using Find My Device for the first time, select Set up secure & erase to configure remote locking and erasing for your phone.
• To lock your phone and log out of your Google Account, click Secure device.
• If you wish to completely delete everything on your phone, choose Erase device.

The removal of all data from your phone’s storage, including applications, app data, and settings, will result from remotely wiping it. Personal information is one type of data that might not be completely removed. After doing this, you won’t be able to access your phone remotely.

4. Dr.Fone - Data Eraser

Step 1: Connect your Samsung Galaxy XCover 7 phone to the desktop. Get Dr.Fone running on your PC. Choose “Data Eraser” from the list of tools.

Utilize a USB cord to link your Samsung Galaxy XCover 7 phone to the PC. Make sure USB debugging is enabled on your phone. On your phone, there will be a pop-up window requesting you to authorize USB debugging if the Samsung Galaxy XCover 7 OS version is higher than 4.2.2. Click “OK” to move forward.

Step 2: Start erasing your Samsung Galaxy XCover 7 phone

Your Samsung Galaxy XCover 7 smartphone will then be immediately detected and connected by Dr.Fone. To begin wiping all of your data, click the “Erase All Data” option.

Make sure you have all the necessary data backed up before continuing because all wiped data cannot be recovered. After that, enter “000000” to verify your action.

The data on your Samsung Galaxy XCover 7 phone will then begin to be deleted by Dr. Fone. The entire process only requires a few minutes. Do not turn off the phone or launch any other phone management programs on the PC.

Step 3. Reset the factory data on your phone.

Dr.Fone will prompt you to tap on Factory Data Reset or Erase All Data on the phone once all app data, photographs, and other private data have been entirely removed. You may use this to entirely erase all of the phone’s settings.

safe & secure

Part 2: FAQs

1. Is there any simple tool to have my Samsung Galaxy XCover 7 backup? (Dr.Fone - Phone Backup)

Yes, there are very few simple tools available that you can use to back up your Samsung Galaxy XCover 7 phone. One such tool is Dr.Fone - Phone backup which is super simple to use and extremely beginner friendly and how you recover all of your lost data from your Samsung Galaxy XCover 7 phone.

2. Do these solutions damage my Samsung Galaxy XCover 7?

Unfortunately, many of the solutions that you used to recover or back up your Samsung Galaxy XCover 7 phone damage the quality of the information and also the hardware or software of your Samsung Galaxy XCover 7 mobile however the best solution to this problem is using Dr.Fone - Phone backup which is a supplied tool which does not cause any problem during or after its usage and help you recover all kind of lost data.

The Bottom Line

Now that you know how to reset a Samsung Galaxy XCover 7 phone that is locked and how to use Samsung Galaxy XCover 7 hard reset code to reset Samsung Galaxy XCover 7, it is time to implement resolution though you can try, and among the ways given above, the best solution is to go with the Wondershare Dr.Fone - Phone Backup. It is a great tool that will immediately help you recover all of your lost information from your Samsung Galaxy XCover 7 phone without causing any harm to your device.

safe & secure

Is your Samsung Galaxy XCover 7 working too slow? Here’s how you can hard reset it

If Samsung Galaxy XCover 7 3.4 hard reset or Samsung Galaxy XCover 7 hard reset is the only option for your mobile phone, you can perform a factory reset to make your device function as it did on the first day. You may need a hard reset if it works slowly, hangs, you want to bypass screen lock, your memory is full, and you want to erase everything, you want to sell or give your device away, and you don’t want anyone to be able to access your files or passwords.

The following instructions will show you how to completely wipe up all of your data and restore the Samsung Galaxy XCover 7 to its factory-fresh condition.

Part 1: Why do I Need to Hard Reset My Samsung Galaxy XCover 7?

We advise you to remove all accounts from the Samsung Galaxy XCover 7 device before performing a factory reset, especially if you plan to sell, give away, or donate the 3.4. It is also a good idea to unlink the Google account. By doing this, we can prevent issues for new users as some more recent smartphones have a feature called FRP, or Factory Reset Protection, which requires the Google account or PIN number that was originally used to set up the Samsung Galaxy XCover 7 when a device is factory restored.

Part 2: How to Hard Reset My Samsung Galaxy XCover 7

1. Fastboot Mode

• Shut down your phone.
• Add a USB cord to your computer or laptop.
• Your phone should now start up in Fastboot Mode after you press and hold the Volume Down + Power buttons for a few seconds. Samsung Galaxy XCover 7 Recovery Mode and Fastboot Mode
• Using the ADB command, start Samsung Galaxy XCover 7 in Bootloader Mode or Fastboot Mode.
• If your computer has ADB and Fastboot drivers installed, and your phone has USB debugging turned on, execute the command below after connecting it.
• Launch Command Prompt (CMD) on your PC, then type the command listed below.

reboot bootloader using adb

• After some time, you will see that your Samsung Galaxy XCover 7 has been hard reset.

2. Hard reset with hardware key button

• Choose “wipe data/factory reset” on your Samsung Galaxy XCover 7 to do a hard reset. Scroll down with the Volume buttons, and press the Power key to agree.
• Next, choose yes from the menu if further confirmation is required, and then click the Power button once.
• Lastly, press the Power key and choose the Reboot system.
• Do not forget to charge your phone.
• Initially, turn off your phone.
• Now Press the Volume Up + Power key for a few seconds to enter recovery mode.
• Press and hold the Power and Volume Up buttons at the same time until the Samsung Galaxy XCover 7 device vibrates. Release all the presses if the Samsung Galaxy XCover 7 logo or Recovery screen shows.
• You can give your phone up to 30 seconds to display the recovery screen.

Bonus Tips

Dr.Fone - Data Eraser (delete all data completely)

Dr.Fone - Data Eraser helps you quickly get rid of all the unwanted information and all of your data however it is always advisable to back it up using the Dr.Fone - Phone Backup.

Let’s see how you can delete completely all the data using Dr.Fone - Data Eraser. do not worry the next section is about how you can back up and restore the data before erasing it completely using Dr.Fone - Phone Backup.

Step 1: Connect your Samsung Galaxy XCover 7 smartphone to your computer. Start Dr.Fone on your computer. Select “Data Eraser” from the tool list.

Connect your Samsung Galaxy XCover 7 to the PC via a USB wire. Ensure that your phone has USB debugging turned on. You will see a pop-up window on your phone asking you to approve USB debugging.

Step 2: Begin wiping your Samsung Galaxy XCover 7 phone.

Dr.Fone will then automatically recognize and connect to your Samsung Galaxy XCover 7 smartphone. To begin wiping all of your data, select “Erase All Data.”.

Before proceeding, ensure that you have backed up any critical data because deleted data cannot be retrieved. After that, type “000000” to confirm your activity.

Dr. Fone will next proceed to wipe the data on your Samsung Galaxy XCover 7 phone. The entire procedure takes only a few minutes. Turn off the phone and do not run any phone administration programs on the PC.

Step 3: Reset your phone’s factory data.

Once all app data, photos, and other private data have been completely erased, Dr.Fone will advise you to touch on Factory Data Reset or Erase All Data on the phone. You may use this to completely delete the phone’s settings.

Your Samsung Galaxy XCover 7 phone has now been completely wiped, giving it the appearance of being brand new.

safe & secure

Dr.Fone - Phone Backup (easy backup before a new hard reset)

Step 1: Connect your Samsung Galaxy XCover 7 phone to your PC.

Launch Dr.Fone on your PC and choose “Phone Backup” from the list of options.

Then, connect your Samsung Galaxy XCover 7 phone to the computer using a USB cord. Please ensure that the phone is in USB debugging mode. If your Samsung Galaxy XCover 7 version is 4.2.2 or higher, a pop-up window on the Samsung Galaxy XCover 7 phone will prompt you to accept USB Debugging. Please press the OK button.

To begin backing up the data on your Samsung Galaxy XCover 7 phone, click Backup.

If you have previously used this application to back up your device, you may examine your backup history by clicking on “View backup history.”

Step 2: Choose which file types to back up.

After connecting the Samsung Galaxy XCover 7 phone, pick the file types you wish to back up. Dr.Fone has already tested all of the file kinds for you. Then, to begin the backup process, click Backup.

The backup will take a few moments. Please do not detach your Samsung Galaxy XCover 7 phone, use it, or erase any data from it during the backup process.

When the backup is finished, you can view the contents of the backup file by clicking the View the backup button.

safe & secure

The Bottom Line

Now that you know how to hard reset Samsung Galaxy XCover 7 it is time to implement all the possible ways and see which one works for you. We also recommend you to proceed with backing up and restoration of all the information so that you will not have to repent in the end. It is all about using smart tools like Dr.Fone - Data Eraser and Dr.Fone - Phone Backup.

4 Easy Ways for Your Samsung Galaxy XCover 7 Hard Reset

Samsung Galaxy XCover 7 is a popular smartphone brand that has a wide range of models. If you are a Samsung Galaxy XCover 7 user, you might have to hard reset your phone for various reasons. A hard reset is a process that erases all data and settings from your phone, and it is the last resort to fix any software-related issues. If you are looking for ways to hard reset your Samsung Galaxy XCover 7 phone, you are in the right place. In this guide, we will discuss four easy ways to hard reset your Samsung Galaxy XCover 7 phone.

If your Samsung Galaxy XCover 7 phone is very slow or hangs, and you cannot fix it even working with memory and other stuff, then you can solve this issue using Samsung Galaxy XCover 7 hard reset. This also works if you have forgotten your PIN or password or you want to bypass the screen lock. So, how to hard reset a Samsung Galaxy XCover 7 phone?

Part 1: 4 easy ways to hard reset your Samsung Galaxy XCover 7

Hard reset Samsung Galaxy XCover 7 is an excellent solution for bypassing screen lock and recovering locked Samsung Galaxy XCover 7 phone. It is also an option to format your Samsung Galaxy XCover 7 phone if you are handing over or selling your phone and want to keep your data secure. So, what are the tools or techniques for Samsung Galaxy XCover 7 hard reset?

1. Google Find My Device (data loss)

Google Find My Device is your best bet if you want to reset your Samsung Galaxy XCover 7 phone hard remotely. So, here is the step-by-step guide for this method.

1. Launch Google Find My Device on your computer and sign in with your Google credentials.

2. You can choose three options, i.e., Play sound, Secure device, and Erase device.

3. Click the Erase Device link.

4. In the Erase all data menu, click the Erase option.

2. Gmail account

If you opt for a Samsung Galaxy XCover 7 hard reset because of screen lock or phone locking issues, then your other option is to use the Gmail account to unlock it. If you are wondering how to use a Gmail account for unlocking, here is the step-by-step guide.

1. Power On your Samsung Galaxy XCover 7 Android phone.
2. When you attempt your phone incorrectly multiple times, you will see the Forgot pattern option.
3. Click the Forgot pattern option.

4. Fill in your Google Account credentials to log in.
5. Now, unlock your device and choose a new password.

3. Answer security questions

Google security questions or your device company Security questions will help you to reset your phone password without data loss.

1. When you attempt a wrong password multiple times, you will see options for recovering passwords.
2. Click on the Forgot pattern option.

3. Click on the “Answer question”.
4. Answer the security questions correctly to unlock your phones and choose a new password or pattern lock.

4. Use Dr.Fone - Data Eraser

If the reason for hard resetting your phone is any issue with the deleting data of the phone, second-hand phone for sale, then your phone need to data erasing. Since it is a complicated technical procedure for a layman, we recommend using Dr.Fone - Data Eraser because of its ease of use and efficiency. You can erase all types of data using this software. Let us see how it works.

1. Connect Your Android Phone

Launch Dr.Fone on your computer. Select “Data Eraser” among all the tools to resolve the Samsung Galaxy XCover 7 hard reset.

Connect your Android phone to the computer using a USB cable. Make sure you have enabled USB debugging on your phone. If the Android os version is above 4.2.2, there will be a pop-up message on your phone asking you to allow USB debugging. Tap on “OK” to continue.

2. Start Erasing Your Android Phone

Then Dr.Fone will automatically recognize and connect your Android device. Click on the “Erase All Data” button to start erasing all your data.

Since all the erased data are not recoverable, make sure you have backed up all the needed data before you proceed. Then key in “000000” into the box to confirm your operation.

Type in “000000” to confirm and move on. Since you may lose your data in system repair and in case of a Samsung Galaxy XCover 7 hard reset, your phone’s memory is wiped, it is always important to keep a backup of your phone data. More on this in the next section.

Then Dr.Fone will start erasing all data on your Android phone. The whole process takes only a few minutes. Please don’t disconnect the phone or open any other phone management software on the computer.

3. Perform Factory Data Reset on Your Phone

After all app data, photos, and all other private data have been completely erased, Dr.Fone will ask you to tap on Factory Data Reset or Erase All Data on the phone. This will help you completely wipe all the settings on the phone.

Now your Android phone has been completely wiped and it’s like a brand new one.

safe & secure

Part 2: How to keep my data safe?

The best thing you can do to keep your data secure, even in case of unwanted crashes and accidents, is to periodically back up your phone and computer. So, you might ask what the best way to back up my phone is. We recommend Dr.Fone - Phone Backup because it is part of your phone’s comprehensive suite of solutions and works efficiently without any technical input from you.

The Bottom Line

In the current digital age, part of our life depends on our gadgets, so keeping them updated and tuned in is the best strategy to function without unwanted bumps. Obviously, it takes some pre-planning like periodic data backup, memory refresh, optimum charging, and so on. Dr.Fone is a comprehensive suite of applications that help you maintain your devices and fix them in case of an accident. This article discusses the Dr.Fone - Data Eraser for Samsung Galaxy XCover 7 hard reset.