How do I reset my Motorola Edge 40 Neo Phone without technical knowledge?

Resetting a Motorola Edge 40 Neo smartphone to factory settings could be necessary. You will probably need to do a hard reset if you want to unlock your smartphone or sell it to someone else. The majority of Motorola Edge 40 Neo devices may be quickly reset simply by pushing the volume and power buttons together. However, hard resetting a Motorola Edge 40 Neo sometimes is a whole other situation and may be much more difficult. That myth will be dispelled for you by us!

If the Motorola Edge 40 Neo device is functioning properly, hard resetting a Motorola Edge 40 Neo tablet without volume buttons won’t be too difficult and can be completed in a matter of taps. However, if the apparatus is broken, it may be an issue. Let’s have a look at all the possibilities.

Part 1: 4 Easy solutions to hard reset your Motorola Edge 40 Neo

1. From recovery mode to delete all data

It’s not particularly difficult to reset a Motorola Edge 40 Neo smartphone or tablet, especially if it has a home button. You can only do a hard reset on a Motorola Edge 40 Neo tablet without volume buttons after entering recovery mode. Follow the procedures outlined below to learn how to reset a Motorola Edge 40 Neo tablet without volume buttons.

Step 1: First, press the power off and home buttons.

Press the power button repeatedly until the Power off, Restart, and other choices are shown. Now, choose “Power Off” and hold it down while tapping your phone’s home button.

At the same time, the Motorola Edge 40 Neo device.

Step 2: Verify the safe mode bootup.

The screen for restarting in safe mode will now show up. To switch to safe mode, select “Yes.”

Step 3: Switch to recovery mode

Your device’s power and home buttons must be pressed and held simultaneously until a new screen shows. Release the two buttons once it appears, then press the power button one more. Press and hold the home button for a moment. With that, recovery mode will start, and a new set of choices will show up on the screen.

Step 4: Select “Factory Reset” and navigate

Navigate down to the “Wipe data/factory reset” option using the home button. To choose the choice, press the power button.

2. Use the factory reset code to wipe data in Motorola Edge 40 Neo

Step 1: Press the Volume Up + Power Keys at the same time as turning off your smartphone and removing the SIM card.

Step 2: The Motorola Edge 40 Neo logo will appear when the phone boots. Keep none of the keys.

Step 3: Scroll down to the Wipe Data / Factory Reset option using the volume down key.

Step 4: If you want to say “OK” and reset, press the Power Key.

To delete all user data, click “Yes.”

Step 5: The factory data reset process will begin on the phone.

After formatting is finished, click “Reboot System Now.”

3. Google Find My Device

Finding My Device:

Go to www.google.com/android/find on your computer’s web browser and sign in with the same Google Account you used on your phone.

When your phone is located, Find My Device will provide specific location information.

Do any of the following:

• If you’ve merely lost your phone, click Play sound to make it ring.
• If you’re using Find My Device for the first time, select Set up secure & erase to configure remote locking and erasing for your phone.
• To lock your phone and log out of your Google Account, click Secure device.
• If you wish to completely delete everything on your phone, choose Erase device.

The removal of all data from your phone’s storage, including applications, app data, and settings, will result from remotely wiping it. Personal information is one type of data that might not be completely removed. After doing this, you won’t be able to access your phone remotely.

4. Dr.Fone - Data Eraser

Step 1: Connect your Motorola Edge 40 Neo phone to the desktop. Get Dr.Fone running on your PC. Choose “Data Eraser” from the list of tools.

Utilize a USB cord to link your Motorola Edge 40 Neo phone to the PC. Make sure USB debugging is enabled on your phone. On your phone, there will be a pop-up window requesting you to authorize USB debugging if the Motorola Edge 40 Neo OS version is higher than 4.2.2. Click “OK” to move forward.

Step 2: Start erasing your Motorola Edge 40 Neo phone

Your Motorola Edge 40 Neo smartphone will then be immediately detected and connected by Dr.Fone. To begin wiping all of your data, click the “Erase All Data” option.

Make sure you have all the necessary data backed up before continuing because all wiped data cannot be recovered. After that, enter “000000” to verify your action.

The data on your Motorola Edge 40 Neo phone will then begin to be deleted by Dr. Fone. The entire process only requires a few minutes. Do not turn off the phone or launch any other phone management programs on the PC.

Step 3. Reset the factory data on your phone.

Dr.Fone will prompt you to tap on Factory Data Reset or Erase All Data on the phone once all app data, photographs, and other private data have been entirely removed. You may use this to entirely erase all of the phone’s settings.

safe & secure

Part 2: FAQs

1. Is there any simple tool to have my Motorola Edge 40 Neo backup? (Dr.Fone - Phone Backup)

Yes, there are very few simple tools available that you can use to back up your Motorola Edge 40 Neo phone. One such tool is Dr.Fone - Phone backup which is super simple to use and extremely beginner friendly and how you recover all of your lost data from your Motorola Edge 40 Neo phone.

2. Do these solutions damage my Motorola Edge 40 Neo?

Unfortunately, many of the solutions that you used to recover or back up your Motorola Edge 40 Neo phone damage the quality of the information and also the hardware or software of your Motorola Edge 40 Neo mobile however the best solution to this problem is using Dr.Fone - Phone backup which is a supplied tool which does not cause any problem during or after its usage and help you recover all kind of lost data.

The Bottom Line

Now that you know how to reset a Motorola Edge 40 Neo phone that is locked and how to use Motorola Edge 40 Neo hard reset code to reset Motorola Edge 40 Neo, it is time to implement resolution though you can try, and among the ways given above, the best solution is to go with the Wondershare Dr.Fone - Phone Backup. It is a great tool that will immediately help you recover all of your lost information from your Motorola Edge 40 Neo phone without causing any harm to your device.

safe & secure

How do I reset my Motorola Edge 40 Neo Phone without technical knowledge?

Resetting a Motorola Edge 40 Neo smartphone to factory settings could be necessary. You will probably need to do a hard reset if you want to unlock your smartphone or sell it to someone else. The majority of Motorola Edge 40 Neo devices may be quickly reset simply by pushing the volume and power buttons together. However, hard resetting a Motorola Edge 40 Neo sometimes is a whole other situation and may be much more difficult. That myth will be dispelled for you by us!

If the Motorola Edge 40 Neo device is functioning properly, hard resetting a Motorola Edge 40 Neo tablet without volume buttons won’t be too difficult and can be completed in a matter of taps. However, if the apparatus is broken, it may be an issue. Let’s have a look at all the possibilities.

Part 1: 4 Easy solutions to hard reset your Motorola Edge 40 Neo

1. From recovery mode to delete all data

It’s not particularly difficult to reset a Motorola Edge 40 Neo smartphone or tablet, especially if it has a home button. You can only do a hard reset on a Motorola Edge 40 Neo tablet without volume buttons after entering recovery mode. Follow the procedures outlined below to learn how to reset a Motorola Edge 40 Neo tablet without volume buttons.

Step 1: First, press the power off and home buttons.

Press the power button repeatedly until the Power off, Restart, and other choices are shown. Now, choose “Power Off” and hold it down while tapping your phone’s home button.

At the same time, the Motorola Edge 40 Neo device.

Step 2: Verify the safe mode bootup.

The screen for restarting in safe mode will now show up. To switch to safe mode, select “Yes.”

Step 3: Switch to recovery mode

Your device’s power and home buttons must be pressed and held simultaneously until a new screen shows. Release the two buttons once it appears, then press the power button one more. Press and hold the home button for a moment. With that, recovery mode will start, and a new set of choices will show up on the screen.

Step 4: Select “Factory Reset” and navigate

Navigate down to the “Wipe data/factory reset” option using the home button. To choose the choice, press the power button.

2. Use the factory reset code to wipe data in Motorola Edge 40 Neo

Step 1: Press the Volume Up + Power Keys at the same time as turning off your smartphone and removing the SIM card.

Step 2: The Motorola Edge 40 Neo logo will appear when the phone boots. Keep none of the keys.

Step 3: Scroll down to the Wipe Data / Factory Reset option using the volume down key.

Step 4: If you want to say “OK” and reset, press the Power Key.

To delete all user data, click “Yes.”

Step 5: The factory data reset process will begin on the phone.

After formatting is finished, click “Reboot System Now.”

3. Google Find My Device

Finding My Device:

Go to www.google.com/android/find on your computer’s web browser and sign in with the same Google Account you used on your phone.

When your phone is located, Find My Device will provide specific location information.

Do any of the following:

• If you’ve merely lost your phone, click Play sound to make it ring.
• If you’re using Find My Device for the first time, select Set up secure & erase to configure remote locking and erasing for your phone.
• To lock your phone and log out of your Google Account, click Secure device.
• If you wish to completely delete everything on your phone, choose Erase device.

The removal of all data from your phone’s storage, including applications, app data, and settings, will result from remotely wiping it. Personal information is one type of data that might not be completely removed. After doing this, you won’t be able to access your phone remotely.

4. Dr.Fone - Data Eraser

Step 1: Connect your Motorola Edge 40 Neo phone to the desktop. Get Dr.Fone running on your PC. Choose “Data Eraser” from the list of tools.

Utilize a USB cord to link your Motorola Edge 40 Neo phone to the PC. Make sure USB debugging is enabled on your phone. On your phone, there will be a pop-up window requesting you to authorize USB debugging if the Motorola Edge 40 Neo OS version is higher than 4.2.2. Click “OK” to move forward.

Step 2: Start erasing your Motorola Edge 40 Neo phone

Your Motorola Edge 40 Neo smartphone will then be immediately detected and connected by Dr.Fone. To begin wiping all of your data, click the “Erase All Data” option.

Make sure you have all the necessary data backed up before continuing because all wiped data cannot be recovered. After that, enter “000000” to verify your action.

The data on your Motorola Edge 40 Neo phone will then begin to be deleted by Dr. Fone. The entire process only requires a few minutes. Do not turn off the phone or launch any other phone management programs on the PC.

Step 3. Reset the factory data on your phone.

Dr.Fone will prompt you to tap on Factory Data Reset or Erase All Data on the phone once all app data, photographs, and other private data have been entirely removed. You may use this to entirely erase all of the phone’s settings.

safe & secure

Part 2: FAQs

1. Is there any simple tool to have my Motorola Edge 40 Neo backup? (Dr.Fone - Phone Backup)

Yes, there are very few simple tools available that you can use to back up your Motorola Edge 40 Neo phone. One such tool is Dr.Fone - Phone backup which is super simple to use and extremely beginner friendly and how you recover all of your lost data from your Motorola Edge 40 Neo phone.

2. Do these solutions damage my Motorola Edge 40 Neo?

Unfortunately, many of the solutions that you used to recover or back up your Motorola Edge 40 Neo phone damage the quality of the information and also the hardware or software of your Motorola Edge 40 Neo mobile however the best solution to this problem is using Dr.Fone - Phone backup which is a supplied tool which does not cause any problem during or after its usage and help you recover all kind of lost data.

The Bottom Line

Now that you know how to reset a Motorola Edge 40 Neo phone that is locked and how to use Motorola Edge 40 Neo hard reset code to reset Motorola Edge 40 Neo, it is time to implement resolution though you can try, and among the ways given above, the best solution is to go with the Wondershare Dr.Fone - Phone Backup. It is a great tool that will immediately help you recover all of your lost information from your Motorola Edge 40 Neo phone without causing any harm to your device.

safe & secure

How to Reset a Motorola Edge 40 Neo Phone That Is Locked

“Looking for the best solutions on how to factory reset Motorola Edge 40 Neo phone when locked?”

The need to reset a Motorola Edge 40 Neo phone arises in several situations like forgetting the password, PIN, or pattern, purchasing a second-hand device that is locked, accidentally changing the password or setting a wrong one, and others. In all these and other similar situations, you would need to reset your Motorola Edge 40 Neo phone and this can be done using different methods and tools.

In this article, we will discuss all these methods that can help you reset your device so that it can be accessed without any hassles.

Part 1: Things You Should Be Aware of Before Resetting Motorola Edge 40 Neo Phones

Before you start resetting your Motorola Edge 40 Neo device through any of the methods, there are certain important things that should be considered and taken care of. Check them out as below.

• First of all, ensure that your Motorola Edge 40 Neo phone is charged so that the battery does not go off in between and stop the ongoing process.
• Ensure to clear the cache on your Motorola Edge 40 Neo phone.
• If your Motorola Edge 40 Neo phone is not locked, make sure to take the backup of the Motorola Edge 40 Neo device to prevent accidental loss of data. If the Motorola Edge 40 Neo device is locked, ensure that from next time you keep taking the backup on regular basis.

Part 2: How to Reset Motorola Edge 40 Neo Phone When Locked?

Once you have fulfilled the above mention pre-requisites, next comes the process of device resetting. If your Motorola Edge 40 Neo phone is locked, there are different methods that can help you reset your device and the popular ones can be checked as below.

Method 1: Reset Motorola Edge 40 Neo using Google’s Android Device Manager

The Android Device Manager which is also known as Find My Phone is an excellent feature that is majorly used for locating the lost or the stolen phone. This feature also allows the users to unlock and reset their devices. The Android Device Manager can only function if you know the Google ID and password that was used for device initialization. The feature can be used to erase the Motorola Edge 40 Neo device data and reset it.

Steps to reset Motorola Edge 40 Neo phone using Google Android Device Manager

• Step 1. On your PC browser, using your Google account, sign in to the Google Find My Device.
• Step 2. The list of devices will appear on the screen, from which you need to choose the Motorola Edge 40 Neo phone that you want to unlock and reset.
• Step 3. Now, from the available options, click on ERASE DEVICE.
• Step 4. Again, tap on ERASE DEVICE, and to continue you need to log in to your Google account.

With the completion of the above steps, your Motorola Edge 40 Neo phone will reset.

Method 2: Perform a Hard Reset on Motorola Edge 40 Neo with Hardware Keys

Hard reset which is also termed factory reset is a feature that will reset all the Motorola Edge 40 Neo device settings and bring them to the factory setting status. While you perform the hard reset, all the data of your phone as well as the installed apps will also be deleted.

Steps to hard reset Motorola Edge 40 Neo Phone

• Step 1. Using the Power button, turn off your Motorola Edge 40 Neo phone.
• Step 2. Press and hold the Volume Up and Power button together for a few seconds.
• Step 3. In some time, the Recovery mode will load on the screen. From the menu, choose to Wipe data/factory reset using the Volume Up/Down buttons and the selected option can be confirmed using the Power button.
• Step 4. At the space provided, enter the word Yes and then click on the Wipe data/factory reset button.
• Step 5. Again, to confirm the hard reset, click on the Wipe data/factory reset button.
• Step 6. The process of hard resetting will start and when completed, click on Reboot system now for restarting the unlocked phone.

Note: After the hard reset, Google Account Verification, FRP screen will appear where you need to enter the correct Google account or PIN that was previously synced with the Motorola Edge 40 Neo device. If you know the Google credentials, it’s great, but in case you have forgotten then no need to worry as there are Motorola Edge 40 Neo FRP bypass tools available as well as Motorola Edge 40 Neo codes that can be used to bypass the FRP lock.

Method 3: An Efficient Alternative to Reset Locked Motorola Edge 40 Neo Phone

If the above-listed methods do not work for any reason, we recommend using Dr.Fone-Screen Unlock (Android) as the best alternative. This is a Windows and Mac-based tool that can help bypass and remove all types of screen locks including PIN, passcode, pattern, Face ID as well as a fingerprint. The software not only works with Motorola Edge 40 Neo but all other popular Android devices including Motorola Edge 40 Neo, LG, Oppo, and more.

safe & secure

The screen locks can be removed without rooting, and the software is completely safe to use.

Dr.Fone - Screen Unlock (Android)

The Best Tool for factory reset Motorola Edge 40 Neo Phone When Locked

• Work perfectly to reset your Motorola Edge 40 Neo without a password.
• It’s the only solution available that works with both Windows and Mac to help you regain access to your device easily.
• Everybody can handle it without any technical background.
• Except for resetting, it also unlocks the locked Motorola Edge 40 Neo if you are using a PIN, fingerprint, or other screen locks.

4,464,992 people have downloaded it

Steps on how to factory reset Motorola Edge 40 Neo phone without password using Dr. Fone - Screen Unlock

• Step 1. Download, install and launch the Dr.Fone software on your PC and from the main menu choose the Screen Unlock feature.
• Step 2. Next, your Motorola Edge 40 Neo phone needs to be connected to the system using a USB cable, and then from the interface select Unlock Android Screen option.

• Step 3. In the next step, select your Motorola Edge 40 Neo phone’s brand from the supported list in Dr.Fone to ensure it enters the correct specific mode.

• Step 4. Dr.Fone will begin unlocking the Android screen once it enters the specific mode. Please wait for the unlock process to finish.

Part 3. How to Reset Motorola Edge 40 Neo Phone at Normal Cases?

In normal situations, the Motorola Edge 40 Neo phones can be reset using the settings menu or the Android Factory Reset code. Both these methods and their guide to getting the process done are listed below.

Method 1: Reset Motorola Edge 40 Neo phones through the Phone Settings menu

To unlock the screen and reset your Motorola Edge 40 Neo phone, the settings menu of the Motorola Edge 40 Neo device can be used. For this method, you do not need to make your device enter the recovery mode. The steps for the process are as follows.

• Step 1. On your Motorola Edge 40 Neo phone, open the Settings app and look for the Backup and Reset option from the Personalization section.
• Step 2. Next, select Factory Data Reset Option.
• Step 3. Go through the on-screen details and then click on the Reset device button.

The steps above will reset your phone to the default factory settings.

Method 2: Reset Motorola Edge 40 Neo phones with factory reset code

There are Android Reset Codes for different brands of phones that can be used for resetting the Motorola Edge 40 Neo device. These secret codes can be different phones as well as OS versions. In general, the code used for resetting Motorola Edge 40 Neo phones is *#*#2846579#*#*.

Steps to reset Motorola Edge 40 Neo phone using secret reset code

• Step 1. On your Motorola Edge 40 Neo phone, go to the dialer and type the code- *#*#2846579#*#*.
• Step 2. From the menu, click on the Restore Factory option.
• Step 3. Finally, to confirm the resetting of the Motorola Edge 40 Neo device, click on the OK button.

The above methods can also be tried if you get stuck in a situation on how to factory reset Motorola Edge 40 Neo tablets without password. Also, we recently covered a method of how to bypass the Google account on Motorola Edge 40 Neo after a factory reset, we have now had the opportunity to test this with many people with different models of Android and have found mixed results.

Conclusion

The above given are multiple options that can be used for resetting your Motorola Edge 40 Neo phone when you forget your device unlock password. Some of these solutions can be used for free and if they work, nothing like that. Dr.Fone – Screen Unlock (Android) is one of the best methods to reset your Motorola Edge 40 Neo device as it supports removing all types of screen locks in a hassle-free manner.

safe & secure

Also read: