Best Fixes For Tecno Pop 7 Pro Hard Reset

If you are looking for the best fixes for Tecno Pop 7 Pro hard reset, then you have come to the right place. In this guide, we will discuss the best ways to hard reset your Tecno Pop 7 Pro device. We will also provide you with some tips and tricks to help you avoid common issues that may arise during the process.

Do you want to hard reset your Tecno Pop 7 Pro phone? When your phone is not showing its peak performance, it can be very annoying because its working gets slower. If your phone is lagging and apps are not working properly, then there is a problem with its software. The only way to fix this problem is with a hard reset that will restore factory settings in your phone. You can do it to fix your phone or to remove all data if you want to sell it.

If you are facing some troubles with Tecno Pop 7 Pro hard reset, then we have the five best ways to factory reset your phone. Each method is best for certain situations, such as if you forget your password, you only want to erase data, or you want to fix software problems. We will give you simple step-by-step tutorials for each method. Although the procedure is simple, it is best to follow each step.

Using Tecno Pop 7 Pro Hard Reset in What Situations?

1: Erase All Data and Settings

One of the most common reasons for a hard reset is to erase all data and settings from the phone. When your phone runs out of storage, you can only delete the previous data if you want to save something new. Although Tecno Pop 7 Pro phones provide a lot of storage and support SD cards, you can only erase unwanted data if you run out of space. Here is the deal, you can save your data on another device like your laptop and do an Tecno Pop 7 Pro hard reset. This way, you can keep your previous data, make room for new data, and save time.

2: Restore Your Phone Back to Original Operating System and Apps

If your phone is working slower than usual or starts lagging, you can do a factory reset instead of wasting time figuring out the problem. Most problems in a phone come from trash file build-up and software updates. Suppose your phone doesn’t work properly after an update. In that case, you can revert it back to the original operating system by using a factory reset. You can also do it if you don’t like an update’s new features and settings. Before your Tecno Pop 7 Pro hard reset, make sure to backup your data on cloud storage to restore it afterward.

3: Other Situations (like selling your phone…)

Aside from the two situations discussed earlier, you might also have to hard reset your phone in other cases. Let’s say you want to buy a new phone or upgrade to a newer model. You will not use your old phone and will probably sell it. Before you sell it, you have to erase all data and personal information like passwords and accounts from your phone. In another scenario, let’s say your phone is stolen or you lost it. All you need to do is use the Tecno Pop 7 Pro hard reset to ensure no one can access your personal data.

1: Hard Reset from Settings (if you have password)

The easiest way to do an Tecno Pop 7 Pro hard reset is by using the factory reset option in the settings. This method will erase all data and settings, and you can easily do it in two easy steps. But it only works if you know the password of your phone. If you don’t know the password and the phone is unlocked, it will still require a password for confirmation. Follow these steps for a hard reset from settings.

• Open settings and tap on the “system” option.
• Tap on the “Reset Options” in the system menu.
• Tap on Erase all data or factory reset.
• Enter the Password and tap reset for confirmation.
• The system will erase all data and reboot.

2: Restore with Recovery Mode

Suppose you want to hard reset your locked Tecno Pop 7 Pro phone, use the recovery mode. With recovery mode, you don’t have to go to settings and erase data after providing the password. The only drawback of using recovery mode is that it is not best for beginners. Follow these steps for your Tecno Pop 7 Pro hard reset using recovery mode.

• Power off your mobile phone.
• Hold the volume up and power buttons.
• Enter the menu and navigate using the volume up and down buttons.
• Select Wipe data/factory reset using the power button.

3: Dr.Fone - Data Eraser (delete all data and settings)

safe & secure

If you want to hard reset your phone just to erase all its data and settings, instead of using the long factory reset method, erase data with Dr.Fone. With third-party software like Dr.Fone, you can erase anything from your mobile in one click. It helps you save time, and you don’t have to set up your phone after you are done. You can also restore the erased data using Dr.Fone as well. Here are the steps for erasing data from your mobile using Dr.Fone.

• Launch Dr.Fone on your computer, select “Data Erase”, and connect your mobile with your computer using a USB cable.

• Click on the Start button to erase the data on your mobile.

• Type the key and click on “erase now”.

• Dr.Fone will erase all types of data on your device, and you can see the progress on your computer screen.

4: Dr.Fone - Screen Unlock (when you forget password)

Most people do an Tecno Pop 7 Pro hard reset because they forget their screen lock or password. But it also erases all their data and settings, which is a big loss just to recover a password of their phones. Instead of doing a hard reset, you can use the Dr.Fone screen unlock feature to unlock any phone without password. You can also reset a new password without any complicated procedure. Here is the guide on how to unlock phones with Dr.Fone.

safe & secure

• Launch Dr.Fone on your computer, select “screen lock”, and use a USB cable to connect your mobile with your computer.
• Select Tecno Pop 7 Pro on Dr.Fone and put your phone into the specific mode.

• Dr.Fone will automatically lead your phone to enter the specific mode. After downloading, click “remove now” to open the screen lock. Then wait for the unlock process to complete.

5: Dr.Fone - System Repair (fix some software problems)

safe & secure

If your phone is lagging, or you want to fix software problems, doing a factory reset sounds a bit excessive. It might fix your phone, but you will lose all your data in return. In such cases, you can use the system recovery feature of Dr.Fone to fix any issue with your phone’s software. It can solve display problems, sound issues, heat-up issues, etc. Follow these steps to fix software issues using Dr.Fone.

• Open Dr.Fone on your computer and connect your mobile phone with a USB cable.
• Click on “System Repair” and select “Android Repair.”

• Enter the Tecno Pop 7 Pro device information with its name, model, and country.

• Click on Next and type the code you see on the screen.

Bottom Line

This concludes our article on five ways to hard reset Tecno Pop 7 Pro phones. You might be wondering which method is best for your Tecno Pop 7 Pro hard reset. The best way to factory reset your phone, erase all data, or unlock the screen is by using Dr.Fone. It is multipurpose software that enables users to fix various problems without doing anything. All you need to do is install Dr.Fone on your computer and connect your phone with it. Dr.Fone has various other features like WhatsApp transfer, data recovery, and device transfer.

safe & secure

5 Ways to Reset Tecno Pop 7 Pro Without Volume Buttons

Sometimes, there may be a necessity to reset an Android device to its factory settings. Whether you wish to sell your device to someone else or unlock your device, you will most likely have to do a hard reset. Most Android devices can be reset easily by pressing a combination of volume and power buttons. But to hard reset Android tablet without volume buttons is a different ball game altogether and perhaps a lot more cumbersome. We are here to break that myth for you!

If the Android device is working well, to hard reset Android tablet without using the volume buttons won’t be much of a problem and can be done within just a few taps. But if the Tecno Pop 7 Pro device is not functioning, it may pose a problem. That said, there are several methods to hard reset Android tablets without volume buttons. We have been able to list some of the easiest methods and describe them for you in the sections that follow. So read on to learn how to hard reset your Android device without volume buttons.

safe & secure

Part 1: Reset Android without volume buttons using Dr.Fone - Data Eraser (Android)

If you need to reset an Android device that doesn’t have functional volume buttons, Dr.Fone - Data Eraser (Android) can assist you in securely erasing all data and performing a reset. This software provides a reliable solution that doesn’t require volume buttons.

Before proceeding with the reset using Dr.Fone - Data Eraser (Android), carefully consider whether you still want to delete all data from your phone. Resetting will permanently erase all files, settings, and personal information on your device, and it cannot be undone. Therefore, it is important to back up any important data before performing the reset. If you are certain that you want to proceed with the reset using Dr.Fone, follow the steps below:

safe & secure

• Step 1: Download Wondershare Dr.Fone on your computer. Open the “Data Eraser” tool and connect your android device to the computer.

• Step 2: Click “Erase” to start erasing all data on the Android device. Think again about whether you want to delete all data and type “000000” to confirm.

• Step 3: Wait for the erase process to end, and you can view the erasure report to check the data type erased after erasing completes.

safe & secure

Part 2: Reset Android without volume button in recovery mode (need home button)

Resetting an Android smartphone or a tablet is not very hard, especially, if there is a home button on your device. A combination of few button presses including the home button will be the first step to the factory data resetting process. But if there are no physical volume buttons, the process may be quite different from the normal tablets. Only after booting your Android tablet into recovery mode, you will be able to hard reset Android tablet without volume buttons. To know how to reset an Android tablet without volume buttons, follow the steps described below. Remember that this method would only work if your Android device has a home button.

• Step 1: Press Power off + home button.

Press the power button until the options for Power off, Restart, and others appear. Now, tap on the “Power off” option and hold on to it while pressing the home button of your android device at the same time.

• Step 2: Confirm boot into safe mode.

Now, the screen for rebooting into safe mode will appear. Tap on “Yes” to enter the safe mode.

• Step 3: Enter recovery mode.

Press and hold the power button as well as the home button of your device simultaneously until a new screen appears. After it appears, release the two buttons and press the power button one more time. Now, press and hold down the home button. With that, you will enter into recovery mode and a new set of options will appear on the screen.

• Step 4: Navigate and do Factory Reset.

Using the home button to navigate, move down to the “Wipe data/factory reset” option. Press the power button to select the option.

You may have to confirm your choice by selecting “Yes”.

• Step 5: Reboot your device.

After the reset is complete, navigate to the “reboot system now” option and select it to reboot your device. At the end of this process, your device will be reset.

Part 3: Reset Android with the reset pinhole

There are many reasons for opting to reset an Android smartphone or tablet. Sometimes, a forgotten password might get your tablet locked. At times, the screen of your smartphone or tablet might get stuck and fail to respond. Or your device might come with a non-removable battery to make matters worse. For all these problems and many others, you might want to reset your device. But if your device does not come with a home button or volume buttons, you might want to use a different method. Generally, such devices come with a reset pinhole on the Tecno Pop 7 Pro device which can be used to reset the Tecno Pop 7 Pro device. To perform a tablet hard reset without the volume button, follow the simple steps described below.

• Step 1: Find the Reset pinhole.

Look for a very small opening on the back panel or the bezels of a smartphone. Usually, such pinholes are marked “Reset” or “Reboot” and are available on the top left side of the back panel. But be careful not to mistake it with the microphone as using it for resetting your gadget may damage the small microphone permanently and lead to other complications.

• Step 2: Insert a pin into the hole.

After locating it, insert a stretched paperclip or a small pin into the hole and press it for a few seconds.

Now all the data in your Android device will be reset. After this, you can continue to use your device normally without any problem.

Part 4: Reset Android from Settings (phone works normally)

If your Android tablet or smartphone is functioning normally, your device can be reset to the factory settings using just your device itself. Even if your device does not have a home button or volume control buttons, this method will be applicable and can be used to reset the Tecno Pop 7 Pro device. But before using this method to reset your Android device, make sure to back up all the necessary information that you have on your device. You can also sync all the important files to the cloud using your Google account. Also, it is necessary to keep in mind that this procedure will remove all the accounts into which your device is signed in. To know how to reset an Android tablet without volume button, read on.

• Step 1: Open the Settings app.

Tap on the Settings app in the app section of your device to open it.

• Step 2: Select the Data Reset folder.

After that, navigate or scroll down until you can find the “Backup and Reset” option. Tap on it to open the folder.

• Step 3: Tap on Factory data reset.

Now swipe down to find the “Factory data reset” option and tap on it. A new screen will appear, requesting you for confirmation to proceed with the process. Tap on “Reset device” to start the process.

At the end of the process, your device will be reset and ready to use after it completes the mandatory reboot.

Part 5: Reset Android tablet to unlock Android using Dr.Fone - Screen Unlock (Android)

If you are facing the challenge of resetting an Android tablet to unlock the lock screen, the easiest way is to use a dedicated tool. Dr.Fone - Screen Unlock (Android) is recommended in this case. It is a helpful software that provides a solution to bypass screen lock and perform a reset on your Android tablet.

Dr.Fone - Screen Unlock (Android)

The Best Tool to Reset Android and Solve Your Screen Locks

• Reset Android tablets or phones when the Tecno Pop 7 Pro device is locked or without a volume button.
• Bypass the FRP lock of Tecno Pop 7 Pro without a PIN or Google account.
• Support most mainstream Android models like Tecno Pop 7 Pro, Tecno Pop 7 Pro, Xiaomi, etc.
• Everyone can handle the lock screen without any tech knowledge.

3,724,689 people have downloaded it

Here are the steps about how to reset Android to unlock lock screen.

• Step 1: Launch Dr.Fone - Screen Unlock (Android) and connect your Android device.

First, install and launch Wondershare Dr.Fone on your computer. Select the “Screen Unlock” option from the main interface and then click “Android” > “Unlock Android Screen”. Using a USB cable, connect your Android tablet to the computer.

• Step 2: Select your device brand and follow the guide to restart your device.

Dr.Fone will ask you to select your device brand and display the specific way to restart the Tecno Pop 7 Pro device. You need to select your device brand in this step because the unlock way of different device brands is different. And then follow the instructions to restart your device.

• Step 3: The lock screen of your device is removed.

Wait for the reboot process to complete, and then you can access the phone or tablet without the password.

Conclusion

So these are the methods with which you can do a reset without using volume buttons. The difficulty level of the methods depends on the type and brand of the Android device. The first two parts can be performed easily by anyone, and that too in a matter of a few minutes. However, the third method may pose some difficulty, particularly because manufacturers set different key combinations for rebooting the Tecno Pop 7 Pro device into recovery. Nevertheless, once it is figured out, the rest is easy. Hence, it is up to you to decide on the method to be adopted for hard resetting your Android device.

safe & secure

3 Best Tools to Hard Reset Tecno Pop 7 Pro

Smartphones have become a must-have gadget in our lives. We need them to support us in work, schedules, keeping contacts, sharing data, and our banking information. Since they are so important, the questions related to them are also critical and must be solved as soon as possible. So, today we are going to discuss and solve the problem of how to Tecno Pop 7 Pro Y20 hard reset without a password.

Before dealing with the possible solutions and tools, let us get some background knowledge in the following section.

Part 1: Some Common Causes we need to hard reset our Tecno Pop 7 Pro

Hard resetting is usually not easy because it means erasing all your phone data and coming out with a clean phone. Unless you follow a minimalist lifestyle inspired by Marie Kondo, it’s a tough deal. So what may be the reasons for Tecno Pop 7 Pro hard reset?

The battery drains too fast

It is frustrating when you are between some work, and your phone turns off because of battery drain. If this is not a physical battery problem, then any setting or too many applications may cause your battery to eat up quickly. When you hard reset your Tecno Pop 7 Pro phone, there is a high chance of solving this problem.

Constant crashes

Frequent restarts, hanging up of phone, and crashed phone systems are the most common causes why you may want to hard reset your Tecno Pop 7 Pro. Usually, there are system glitches, wrong memory configuration, or unwanted applications behind these crashes and a hard reset has the potential to solve this.

Virus attack

When you suspect your phone is affected by a virus attack, your best bet is to reset your Tecno Pop 7 Pro hard because pinpointing the actual malware or virus file is tricky.

Part 2: What can we do to hard reset Tecno Pop 7 Pro without a password?

You can try to hard reset your Tecno Pop 7 Pro using different methods depending on the primary cause of the issue. Google has introduced different methods to bypass screen locks in case of a forgotten password. However, it would help if you had the proper configuration of your account in the phone before locking it. Let us review these methods and how to use them for vivo y20 hard reset without a password.

Google Find My Device (data loss)

Google Find my device can hard reset your Tecno Pop 7 Pro y20 phone if you already have configured your device in your Google account. Since it can work remotely, you can use it even if you do not hold your phone. Let us see how it works for hard reset Tecno Pop 7 Pro y20.

1. Navigate to the google.com/android website. Sign in with your Google credentials.
2. Choose your Tecno Pop 7 Pro from the “All Devices” list, and click the Erase Device option.
3. Click Erase All Data>Erase and confirm. That’s it; Tecno Pop 7 Pro y20 hard reset is complete.

Gmail account

If you have configured your phone with a Gmail account, then your Gmail account supports recovering from screen lock. Here is how it works.

1. Enter the wrong password a few times, and then you can see a Forgot Pattern/Password option on the screen.

2. Choose Forgot Pattern/Password option and enter your Google account credentials to start the process.
3. When you are done signing in, bypass your screen lock is complete, and you can configure a new password, pattern, or PIN.

Answer security questions

Another way is to use a Google account to bypass your screen lock on the phone. How does it work? Let us show you the step-by-step process.

1. If you enter the wrong password a few times, you will see a “Forgot password” button at the bottom of the screen. Click on this button.
2. Click on the “Answer question” option and answer the pre-configured questions to unlock your phone.

3. When you answer the questions correctly, your phone is unlocked.

Part 3: The best tool to fix your problem

If you have not configured your phone earlier with a Google account and have not taken preventive measures, then, unfortunately, you cannot use the above methods. Then how are you going to reset your Tecno Pop 7 Pro y20 phone hard? We recommend using the Dr. Fone product suite to solve the issues leading to the decision of the Tecno Pop 7 Pro y20 hard reset. The main product you may use is Wondershare Dr.Fone Let us review them one by one.

Precaution is better than cure. Hence having a phone backup that can be restored quickly is a great way to handle tough decisions like Tecno Pop 7 Pro hard reset. Wondershare Dr.Fone is a simple utility with full features to facilitate periodic phone data backup for security. In the case of any Tecno Pop 7 Pro hard reset or factory reset, a fully functional backup ensures little or no data loss.

Wondershare Dr.Fone

Flexibly Back up and Restore Data from Tecno Pop 7 Pro

• Act as an Tecno Pop 7 Pro device manager on PC.
• Back up data from Tecno Pop 7 Pro to PC and restore backups anytime.
• Transfer media between Tecno Pop 7 Pro and iTunes.
• Restore iCloud backups to Tecno Pop 7 Pro without overwriting data.
• Supports the transfer of all data like photos, call logs, contacts, etc.

3981454 people have downloaded it

Let us review how Wondershare Dr.Fone works.

Step 1. Start Dr. Fone’s software on your computer, and choose “My Backup” from the function list.

Step 2. Connect your Tecno Pop 7 Pro to the computer via a USB cable.

Step 3. Click the Backup up Now button to start the backup process of Tecno Pop 7 Pro phone data. Keep your Tecno Pop 7 Pro connected to the computer till your Tecno Pop 7 Pro backup is complete.

Step 4. When the backup is complete, your latest backup will show in the list of previous backups.

safe & secure

Part 4: Restore the backup to your Android phone

When you have an updated phone backup, you can restore it right after the Tecno Pop 7 Pro hard reset. It is a simple process shown as follows.

Step 1. Start Dr. Fone’s software on your computer and select “My backup” from the main menu.

Step 2. Preview the selected file and confirm. Click on Restore to Device it to your Tecno Pop 7 Pro.

Step 3. Keep your Tecno Pop 7 Pro connected to the computer till the process is complete.

The Bottom Line

Smartphones are a critical part of our personal and professional lives now. Keeping them updated, backed up, and fully functional is essential. If your phone has issues or you have forgotten your password, Tecno Pop 7 Pro hard reset is a reliable solution. However, it results in the wiping of data. On the other hand, you can use robust software like Dr.Fone - Screen Unlock to solve your phone’s performance or locking issues without data loss.

safe & secure

You Might Also Like