Best Fixes For Tecno Spark 20 Pro+ Hard Reset

If you are looking for the best fixes for Tecno Spark 20 Pro+ hard reset, then you have come to the right place. In this guide, we will discuss the best ways to hard reset your Tecno Spark 20 Pro+ device. We will also provide you with some tips and tricks to help you avoid common issues that may arise during the process.

Do you want to hard reset your Tecno Spark 20 Pro+ phone? When your phone is not showing its peak performance, it can be very annoying because its working gets slower. If your phone is lagging and apps are not working properly, then there is a problem with its software. The only way to fix this problem is with a hard reset that will restore factory settings in your phone. You can do it to fix your phone or to remove all data if you want to sell it.

If you are facing some troubles with Tecno Spark 20 Pro+ hard reset, then we have the five best ways to factory reset your phone. Each method is best for certain situations, such as if you forget your password, you only want to erase data, or you want to fix software problems. We will give you simple step-by-step tutorials for each method. Although the procedure is simple, it is best to follow each step.

Using Tecno Spark 20 Pro+ Hard Reset in What Situations?

1: Erase All Data and Settings

One of the most common reasons for a hard reset is to erase all data and settings from the phone. When your phone runs out of storage, you can only delete the previous data if you want to save something new. Although Tecno Spark 20 Pro+ phones provide a lot of storage and support SD cards, you can only erase unwanted data if you run out of space. Here is the deal, you can save your data on another device like your laptop and do an Tecno Spark 20 Pro+ hard reset. This way, you can keep your previous data, make room for new data, and save time.

2: Restore Your Phone Back to Original Operating System and Apps

If your phone is working slower than usual or starts lagging, you can do a factory reset instead of wasting time figuring out the problem. Most problems in a phone come from trash file build-up and software updates. Suppose your phone doesn’t work properly after an update. In that case, you can revert it back to the original operating system by using a factory reset. You can also do it if you don’t like an update’s new features and settings. Before your Tecno Spark 20 Pro+ hard reset, make sure to backup your data on cloud storage to restore it afterward.

3: Other Situations (like selling your phone…)

Aside from the two situations discussed earlier, you might also have to hard reset your phone in other cases. Let’s say you want to buy a new phone or upgrade to a newer model. You will not use your old phone and will probably sell it. Before you sell it, you have to erase all data and personal information like passwords and accounts from your phone. In another scenario, let’s say your phone is stolen or you lost it. All you need to do is use the Tecno Spark 20 Pro+ hard reset to ensure no one can access your personal data.

1: Hard Reset from Settings (if you have password)

The easiest way to do an Tecno Spark 20 Pro+ hard reset is by using the factory reset option in the settings. This method will erase all data and settings, and you can easily do it in two easy steps. But it only works if you know the password of your phone. If you don’t know the password and the phone is unlocked, it will still require a password for confirmation. Follow these steps for a hard reset from settings.

• Open settings and tap on the “system” option.
• Tap on the “Reset Options” in the system menu.
• Tap on Erase all data or factory reset.
• Enter the Password and tap reset for confirmation.
• The system will erase all data and reboot.

2: Restore with Recovery Mode

Suppose you want to hard reset your locked Tecno Spark 20 Pro+ phone, use the recovery mode. With recovery mode, you don’t have to go to settings and erase data after providing the password. The only drawback of using recovery mode is that it is not best for beginners. Follow these steps for your Tecno Spark 20 Pro+ hard reset using recovery mode.

• Power off your mobile phone.
• Hold the volume up and power buttons.
• Enter the menu and navigate using the volume up and down buttons.
• Select Wipe data/factory reset using the power button.

3: Dr.Fone - Data Eraser (delete all data and settings)

safe & secure

If you want to hard reset your phone just to erase all its data and settings, instead of using the long factory reset method, erase data with Dr.Fone. With third-party software like Dr.Fone, you can erase anything from your mobile in one click. It helps you save time, and you don’t have to set up your phone after you are done. You can also restore the erased data using Dr.Fone as well. Here are the steps for erasing data from your mobile using Dr.Fone.

• Launch Dr.Fone on your computer, select “Data Erase”, and connect your mobile with your computer using a USB cable.

• Click on the Start button to erase the data on your mobile.

• Type the key and click on “erase now”.

• Dr.Fone will erase all types of data on your device, and you can see the progress on your computer screen.

4: Dr.Fone - Screen Unlock (when you forget password)

Most people do an Tecno Spark 20 Pro+ hard reset because they forget their screen lock or password. But it also erases all their data and settings, which is a big loss just to recover a password of their phones. Instead of doing a hard reset, you can use the Dr.Fone screen unlock feature to unlock any phone without password. You can also reset a new password without any complicated procedure. Here is the guide on how to unlock phones with Dr.Fone.

safe & secure

• Launch Dr.Fone on your computer, select “screen lock”, and use a USB cable to connect your mobile with your computer.
• Select Tecno Spark 20 Pro+ on Dr.Fone and put your phone into the specific mode.

• Dr.Fone will automatically lead your phone to enter the specific mode. After downloading, click “remove now” to open the screen lock. Then wait for the unlock process to complete.

5: Dr.Fone - System Repair (fix some software problems)

safe & secure

If your phone is lagging, or you want to fix software problems, doing a factory reset sounds a bit excessive. It might fix your phone, but you will lose all your data in return. In such cases, you can use the system recovery feature of Dr.Fone to fix any issue with your phone’s software. It can solve display problems, sound issues, heat-up issues, etc. Follow these steps to fix software issues using Dr.Fone.

• Open Dr.Fone on your computer and connect your mobile phone with a USB cable.
• Click on “System Repair” and select “Android Repair.”

• Enter the Tecno Spark 20 Pro+ device information with its name, model, and country.

• Click on Next and type the code you see on the screen.

Bottom Line

This concludes our article on five ways to hard reset Tecno Spark 20 Pro+ phones. You might be wondering which method is best for your Tecno Spark 20 Pro+ hard reset. The best way to factory reset your phone, erase all data, or unlock the screen is by using Dr.Fone. It is multipurpose software that enables users to fix various problems without doing anything. All you need to do is install Dr.Fone on your computer and connect your phone with it. Dr.Fone has various other features like WhatsApp transfer, data recovery, and device transfer.

safe & secure

All About Factory Reset, What Is It and What It Does to Your Tecno Spark 20 Pro+?

I bought a new phone and want to sell my old Tecno Spark 20 Pro+ 3, so I need to clear my data off it. Can someone guide me on how to factory reset the Tecno Spark 20 Pro+ 3 so I can sell it?

As we all know, force restart and even factory reset can resolve many problems on our phones. Sometimes when you want to sell your old phone, you need to factory reset it to clear your data off it. Also, if there is some issue like a screen lock, you can factory reset it to unlock your phone. But do you know how to do a factory reset Tecno Spark 20 Pro+ 3 correctly?

Therefore, we have gathered all that you need to know about a factory reset. After going through this article, you can factory reset Tecno Spark 20 Pro+ phones. So, keep following to resolve your Tecno Spark 20 Pro+ issues.

Part 1: What is Tecno Spark 20 Pro+ Factory Reset?

Principles of Tecno Spark 20 Pro+ Factory Reset

Before you reset your Tecno Spark 20 Pro+ phone, you must ensure your data is all backed up someplace. It can be either on another device or transferred to the cloud. While changing your phone, you can exchange data from your old Tecno Spark 20 Pro+ without much stretch. If you own a Tecno Spark 20 Pro+, a large portion of your data is put away securely in servers.

One way or another, you must twofold check these things before a factory reset:

• Google ID
• Contacts
• Pictures Gallery
• Passwords
• Music

Steps to Start Tecno Spark 20 Pro+ Factory Reset

Now is the right time to factory reset Tecno Spark 20 Pro+ when you have everything backed up. The following steps will help you factory reset your Tecno Spark 20 Pro+:

• On your Tecno Spark 20 Pro+, head into the settings application. Look over right down and search for System and click it. Look down and search for Reset options.

• Go to System and tap the “Erase all data” option.

• Note: After tapping this, the following page will allow you to see what will be cleaned from the Tecno Spark 20 Pro+ device. Make sure everything is covered in your backup.
• Pick whether you need to delete any downloaded SIMs and tap Erase all data.

• You might need to enter your password to complete the reset.

Differences Between Hard Reset and Factory Reset

A factory reset deletes everything from your Tecno Spark 20 Pro+ device. You might utilize a factory reset when your phone could have a virus or when it is seriously breaking down. A factory reset returns your Tecno Spark 20 Pro+ to its factory settings, driving you to set it up again as a new phone.

A hard reset is a basic rebooting of your cell phone. It doesn’t influence the data on your Tecno Spark 20 Pro+. You might utilize a hard reset when your Tecno Spark 20 Pro+ is acting slow. However, it is different from a standard reboot of your Tecno Spark 20 Pro+.

Part 2: What can Tecno Spark 20 Pro+ Factory Reset do?

A factory reset deletes every user information, application, related application data, and settings on your pixel phone. It is like hard drive reformatting in a PC. However, a factory reset fixes different hardware and software-related issues. It also unlocks your phone in case you forget your lock screen password, or you need to factory reset Tecno Spark 20 Pro+ before selling it to protect your privacy.

Part 3: 2 Easy Ways to improve your Tecno Spark 20 Pro+ Factory Reset

1. Dr.Fone - Data Eraser

You can use Dr.Fone Data Eraser to reset your Tecno Spark 20 Pro+ phone within minutes. Whether you need to sell your old Tecno Spark 20 Pro+ or want to make it look like a new one, you can delete its files with Dr.Fone - Data Eraser. All private data and downloads are taken out. Moreover, you can delete your Tecno Spark 20 Pro+ even if its software is corrupted. Additionally, you can erase specific documents on your Tecno Spark 20 Pro+ also. The other Tecno Spark 20 Pro+ data and settings will be protected in this case. So, here is the Wondershare Dr.Fone step-by-step guide to doing so:

safe & secure

• Launch the Wondershare Dr.Fone software and click the “Data Eraser” from the main window.

• Connect your Tecno Spark 20 Pro+ and PC using a connector. Please make sure that USB Debugging is on in your Tecno Spark 20 Pro+.

• The software will automatically read your Tecno Spark 20 Pro+ phone and start to erase your files. Click “Erase All Data.”

• Type in “000000” to affirm your activity and continue.

• Then, at that point, Dr.Fone will ask you to click the Factory Reset option on your Tecno Spark 20 Pro+. You can also select “Erase All Data” to reset your Tecno Spark 20 Pro+.

2. Dr.Fone - Phone Backup

As we mentioned before, we recommend you back up your files before a factory reset. You can use Dr.Fone - Phone Backup (Android) to back up data without any hassle and data loss. With this tool, backing up your Tecno Spark 20 Pro+ has never been simpler. The program makes it simple to back up your Tecno Spark 20 Pro+ data to the PC and recover supporting data for your Android gadget. Now let’s find out how you can back up and upload your Tecno Spark 20 Pro+ files.

safe & secure

• Open Dr.Fone Phone Backup on your PC, and select the “Phone Backup” option.

• Connect your Tecno Spark 20 Pro+ and PC through a USB connector. However, make sure to permit USB Debugging on your Tecno Spark 20 Pro+.

• Click “Backup” to begin the backup of Tecno Spark 20 Pro+ data.
• After the connection, select the File types you need to upload. Of course, Dr.Fone has checked all the document types for you. Then click on backup to begin the process. It will require a short time. Kindly don’t detach your Tecno Spark 20 Pro+ nor use it during the backup.

• After the backup is finished, you can tap on the “View the Backup” button to see what’s in the document.

The Bottom Line

Factory resetting is not ideal for some problems, but sometimes it becomes the only possible solution. So, if you have your phone stuck or want to sell your old phone, you need to factory reset Tecno Spark 20 Pro+. But make sure to back up your phone before going for a reset. You can back up your files before a factory reset using Dr.Fone - Phone Backup (Android).

safe & secure

Is your Tecno Spark 20 Pro+ working too slow? Here’s how you can hard reset it

If Tecno Spark 20 Pro+ 3.4 hard reset or Tecno Spark 20 Pro+ hard reset is the only option for your mobile phone, you can perform a factory reset to make your device function as it did on the first day. You may need a hard reset if it works slowly, hangs, you want to bypass screen lock, your memory is full, and you want to erase everything, you want to sell or give your device away, and you don’t want anyone to be able to access your files or passwords.

The following instructions will show you how to completely wipe up all of your data and restore the Tecno Spark 20 Pro+ to its factory-fresh condition.

Part 1: Why do I Need to Hard Reset My Tecno Spark 20 Pro+?

We advise you to remove all accounts from the Tecno Spark 20 Pro+ device before performing a factory reset, especially if you plan to sell, give away, or donate the 3.4. It is also a good idea to unlink the Google account. By doing this, we can prevent issues for new users as some more recent smartphones have a feature called FRP, or Factory Reset Protection, which requires the Google account or PIN number that was originally used to set up the Tecno Spark 20 Pro+ when a device is factory restored.

Part 2: How to Hard Reset My Tecno Spark 20 Pro+

1. Fastboot Mode

• Shut down your phone.
• Add a USB cord to your computer or laptop.
• Your phone should now start up in Fastboot Mode after you press and hold the Volume Down + Power buttons for a few seconds. Tecno Spark 20 Pro+ Recovery Mode and Fastboot Mode
• Using the ADB command, start Tecno Spark 20 Pro+ in Bootloader Mode or Fastboot Mode.
• If your computer has ADB and Fastboot drivers installed, and your phone has USB debugging turned on, execute the command below after connecting it.
• Launch Command Prompt (CMD) on your PC, then type the command listed below.

reboot bootloader using adb

• After some time, you will see that your Tecno Spark 20 Pro+ has been hard reset.

2. Hard reset with hardware key button

• Choose “wipe data/factory reset” on your Tecno Spark 20 Pro+ to do a hard reset. Scroll down with the Volume buttons, and press the Power key to agree.
• Next, choose yes from the menu if further confirmation is required, and then click the Power button once.
• Lastly, press the Power key and choose the Reboot system.
• Do not forget to charge your phone.
• Initially, turn off your phone.
• Now Press the Volume Up + Power key for a few seconds to enter recovery mode.
• Press and hold the Power and Volume Up buttons at the same time until the Tecno Spark 20 Pro+ device vibrates. Release all the presses if the Tecno Spark 20 Pro+ logo or Recovery screen shows.
• You can give your phone up to 30 seconds to display the recovery screen.

Bonus Tips

Dr.Fone - Data Eraser (delete all data completely)

Dr.Fone - Data Eraser helps you quickly get rid of all the unwanted information and all of your data however it is always advisable to back it up using the Dr.Fone - Phone Backup.

Let’s see how you can delete completely all the data using Dr.Fone - Data Eraser. do not worry the next section is about how you can back up and restore the data before erasing it completely using Dr.Fone - Phone Backup.

Step 1: Connect your Tecno Spark 20 Pro+ smartphone to your computer. Start Dr.Fone on your computer. Select “Data Eraser” from the tool list.

Connect your Tecno Spark 20 Pro+ to the PC via a USB wire. Ensure that your phone has USB debugging turned on. You will see a pop-up window on your phone asking you to approve USB debugging.

Step 2: Begin wiping your Tecno Spark 20 Pro+ phone.

Dr.Fone will then automatically recognize and connect to your Tecno Spark 20 Pro+ smartphone. To begin wiping all of your data, select “Erase All Data.”.

Before proceeding, ensure that you have backed up any critical data because deleted data cannot be retrieved. After that, type “000000” to confirm your activity.

Dr. Fone will next proceed to wipe the data on your Tecno Spark 20 Pro+ phone. The entire procedure takes only a few minutes. Turn off the phone and do not run any phone administration programs on the PC.

Step 3: Reset your phone’s factory data.

Once all app data, photos, and other private data have been completely erased, Dr.Fone will advise you to touch on Factory Data Reset or Erase All Data on the phone. You may use this to completely delete the phone’s settings.

Your Tecno Spark 20 Pro+ phone has now been completely wiped, giving it the appearance of being brand new.

safe & secure

Dr.Fone - Phone Backup (easy backup before a new hard reset)

Step 1: Connect your Tecno Spark 20 Pro+ phone to your PC.

Launch Dr.Fone on your PC and choose “Phone Backup” from the list of options.

Then, connect your Tecno Spark 20 Pro+ phone to the computer using a USB cord. Please ensure that the phone is in USB debugging mode. If your Tecno Spark 20 Pro+ version is 4.2.2 or higher, a pop-up window on the Tecno Spark 20 Pro+ phone will prompt you to accept USB Debugging. Please press the OK button.

To begin backing up the data on your Tecno Spark 20 Pro+ phone, click Backup.

If you have previously used this application to back up your device, you may examine your backup history by clicking on “View backup history.”

Step 2: Choose which file types to back up.

After connecting the Tecno Spark 20 Pro+ phone, pick the file types you wish to back up. Dr.Fone has already tested all of the file kinds for you. Then, to begin the backup process, click Backup.

The backup will take a few moments. Please do not detach your Tecno Spark 20 Pro+ phone, use it, or erase any data from it during the backup process.

When the backup is finished, you can view the contents of the backup file by clicking the View the backup button.

safe & secure

The Bottom Line

Now that you know how to hard reset Tecno Spark 20 Pro+ it is time to implement all the possible ways and see which one works for you. We also recommend you to proceed with backing up and restoration of all the information so that you will not have to repent in the end. It is all about using smart tools like Dr.Fone - Data Eraser and Dr.Fone - Phone Backup.