All Things You Need to Know about Wipe Data/Factoy Reset For Xiaomi Redmi 13C

Wiping data or carrying out a factory reset on an Android device is an effective solution for various issues on your Android phone. Even if you are contemplating selling your phone and you need all your device data to be wiped out, you carry out a factory reset. But, before you proceed, what’s important is to understand about wipe data/ factory reset, because, if you don’t, you might end up losing all your important data before it is backed up, serving no purpose. So, before you wipe data/ factory reset Android, here’s what you should know about it.

Part 1: What data will be wiped by Wipe Data/Factory Reset?

Doing a factory reset on the Android device will remove all the applications installed on the Xiaomi Redmi 13C device along with the data associated with them. This brings back all the default settings of the Xiaomi Redmi 13C device as it was when the phone was new, giving you a clean slate to start all over again.

Since Wipe data/factory reset deletes all applications, app data, and information (documents, videos, images, music, etc) stored in the internal space, it is required for you to perform a data backup operation before you reset the Android device to factory settings. However, wipe data/factory reset does not affect the SD card in any way. So, even if you have the SD card inserted with videos, images, documents, and any other personal information in the Android device while carrying out a factory reset, everything will remain safe and intact.

Part 2: How to perform Wipe Data/ Factory Reset?

Performing wipe data/factory reset on your Android device e is very simple. It is a matter of time before you wipe out everything lying on the internal storage of your Android device. Here’s how you can perform Wipe data/ Factory Rest on your device:

Step 1: First of all, turn off the Xiaomi Redmi 13C device. Then, use the volume up button, volume down button, and Power button on your Android device simultaneously and hold on to the buttons until the phone turns on.

Step 2: Release the buttons when the Xiaomi Redmi 13C device is powered on. Now, use the volume up and down button to sift through the options given on the screen. Use the power button to select “Recovery Mode” on the screen. Your phone will restart into “Recovery Mode’ and you will find the below screen:

Step 3: Holding the power button down, use the volume up button, and the Android system recovery menu will pop up.

Now, scroll down to “wipe data/factory reset” option from the list of commands and use the Power button to select it.

Now, scroll down to “Yes – delete all user data” using the volume button and then push the power button to select.

In some time your device will be reset into factory settings with all your data erased. The entire process will take a few minutes. Ensure that you have the phone at least 70% charged so that it does not run out of charge midway.

Part 3: Does Wipe Data/ Factory Reset wipe all your data?

There are various instances where you would require performing a wipe/factory reset on your device. It might be because of some glitch that you would like to troubleshoot on your Android device. Wiping data from the phone is a universal solution in such cases. Even in cases where you want to sell your device, performing a factory reset seems the best option. What’s important is to make sure you don’t leave a trace of your personal information on the Xiaomi Redmi 13C device. Therefore, wipe data/factory reset is never the ultimate solution to rely on. It is neither the best option anyway.

Contrary to conventional thought of relying on wipe data/factory reset Android believing it to be the best solution for wiping out complete data from the phone, all research outcomes have proved something different. It is easier to recover account tokens used to authenticate you when you enter a password for the first time, from service providers like Facebook, WhatsApp, and Google. Hence it is easier to restore the user’s credentials as well.

So, to protect your privacy and completely wipe data off the Xiaomi Redmi 13C device, you can use Dr.Fone - Data Eraser. This is an amazing tool that erases everything on the Xiaomi Redmi 13C device without leaving an ounce of data in it. Here’s how you can use Dr.Fone - Data Eraser to completely wipe the data and protect privacy:

Dr.Fone - Data Eraser

Fully Erase Everything on Android and Protect Your Privacy

• Simple, click-through process.
• Wipe your Android completely and permanently.
• Erase photos, contacts, messages, call logs, and all private data.
• Supports all Android devices available in the market.

4,683,556 people have downloaded it

Step 1: Install and launch Dr.Fone - Data Eraser

First of all, install Dr.Fone on your computer and launch it by double-clicking on the icon. You will find the below window. You will find various toolkits on the interface. Select Erase from various toolkits.

Step 2: Initiate the Process

When the tool’s window opens, click Start to trigger the operation.

Step 3: Confirm and Execute Data Eraser

To remove all data, confirm with the given code. After inputting the code, select Erase Now. A message will appear upon erasure completion. Click Erasure Report to review the types of data erased.

This will protect your privacy as your Android device will reboot into default settings with all the data erased.

Since the erased data cannot be recovered, it is highly recommended to have all the personal data backed up before operating here using Dr.Fone.

And you could watch this YouTube video for an in-depth tutorial.

Try It Free Try It Free

safe & secure

Conclusion

Hence, today we learned about wiping data and also factory reset. Well as per us, using Dr.Fone - Data Eraser is the best option as it is a simple and click-through process and helps you completely erase data from your Android. This toolkit also is the best as it supports all Android devices available in the market today.

Try It Free Try It Free

safe & secure

How do I reset my Xiaomi Redmi 13C Phone without technical knowledge?

Resetting a Xiaomi Redmi 13C smartphone to factory settings could be necessary. You will probably need to do a hard reset if you want to unlock your smartphone or sell it to someone else. The majority of Xiaomi Redmi 13C devices may be quickly reset simply by pushing the volume and power buttons together. However, hard resetting a Xiaomi Redmi 13C sometimes is a whole other situation and may be much more difficult. That myth will be dispelled for you by us!

If the Xiaomi Redmi 13C device is functioning properly, hard resetting a Xiaomi Redmi 13C tablet without volume buttons won’t be too difficult and can be completed in a matter of taps. However, if the apparatus is broken, it may be an issue. Let’s have a look at all the possibilities.

Part 1: 4 Easy solutions to hard reset your Xiaomi Redmi 13C

1. From recovery mode to delete all data

It’s not particularly difficult to reset a Xiaomi Redmi 13C smartphone or tablet, especially if it has a home button. You can only do a hard reset on a Xiaomi Redmi 13C tablet without volume buttons after entering recovery mode. Follow the procedures outlined below to learn how to reset a Xiaomi Redmi 13C tablet without volume buttons.

Step 1: First, press the power off and home buttons.

Press the power button repeatedly until the Power off, Restart, and other choices are shown. Now, choose “Power Off” and hold it down while tapping your phone’s home button.

At the same time, the Xiaomi Redmi 13C device.

Step 2: Verify the safe mode bootup.

The screen for restarting in safe mode will now show up. To switch to safe mode, select “Yes.”

Step 3: Switch to recovery mode

Your device’s power and home buttons must be pressed and held simultaneously until a new screen shows. Release the two buttons once it appears, then press the power button one more. Press and hold the home button for a moment. With that, recovery mode will start, and a new set of choices will show up on the screen.

Step 4: Select “Factory Reset” and navigate

Navigate down to the “Wipe data/factory reset” option using the home button. To choose the choice, press the power button.

2. Use the factory reset code to wipe data in Xiaomi Redmi 13C

Step 1: Press the Volume Up + Power Keys at the same time as turning off your smartphone and removing the SIM card.

Step 2: The Xiaomi Redmi 13C logo will appear when the phone boots. Keep none of the keys.

Step 3: Scroll down to the Wipe Data / Factory Reset option using the volume down key.

Step 4: If you want to say “OK” and reset, press the Power Key.

To delete all user data, click “Yes.”

Step 5: The factory data reset process will begin on the phone.

After formatting is finished, click “Reboot System Now.”

3. Google Find My Device

Finding My Device:

Go to www.google.com/android/find on your computer’s web browser and sign in with the same Google Account you used on your phone.

When your phone is located, Find My Device will provide specific location information.

Do any of the following:

• If you’ve merely lost your phone, click Play sound to make it ring.
• If you’re using Find My Device for the first time, select Set up secure & erase to configure remote locking and erasing for your phone.
• To lock your phone and log out of your Google Account, click Secure device.
• If you wish to completely delete everything on your phone, choose Erase device.

The removal of all data from your phone’s storage, including applications, app data, and settings, will result from remotely wiping it. Personal information is one type of data that might not be completely removed. After doing this, you won’t be able to access your phone remotely.

4. Dr.Fone - Data Eraser

Step 1: Connect your Xiaomi Redmi 13C phone to the desktop. Get Dr.Fone running on your PC. Choose “Data Eraser” from the list of tools.

Utilize a USB cord to link your Xiaomi Redmi 13C phone to the PC. Make sure USB debugging is enabled on your phone. On your phone, there will be a pop-up window requesting you to authorize USB debugging if the Xiaomi Redmi 13C OS version is higher than 4.2.2. Click “OK” to move forward.

Step 2: Start erasing your Xiaomi Redmi 13C phone

Your Xiaomi Redmi 13C smartphone will then be immediately detected and connected by Dr.Fone. To begin wiping all of your data, click the “Erase All Data” option.

Make sure you have all the necessary data backed up before continuing because all wiped data cannot be recovered. After that, enter “000000” to verify your action.

The data on your Xiaomi Redmi 13C phone will then begin to be deleted by Dr. Fone. The entire process only requires a few minutes. Do not turn off the phone or launch any other phone management programs on the PC.

Step 3. Reset the factory data on your phone.

Dr.Fone will prompt you to tap on Factory Data Reset or Erase All Data on the phone once all app data, photographs, and other private data have been entirely removed. You may use this to entirely erase all of the phone’s settings.

safe & secure

Part 2: FAQs

1. Is there any simple tool to have my Xiaomi Redmi 13C backup? (Dr.Fone - Phone Backup)

Yes, there are very few simple tools available that you can use to back up your Xiaomi Redmi 13C phone. One such tool is Dr.Fone - Phone backup which is super simple to use and extremely beginner friendly and how you recover all of your lost data from your Xiaomi Redmi 13C phone.

2. Do these solutions damage my Xiaomi Redmi 13C?

Unfortunately, many of the solutions that you used to recover or back up your Xiaomi Redmi 13C phone damage the quality of the information and also the hardware or software of your Xiaomi Redmi 13C mobile however the best solution to this problem is using Dr.Fone - Phone backup which is a supplied tool which does not cause any problem during or after its usage and help you recover all kind of lost data.

The Bottom Line

Now that you know how to reset a Xiaomi Redmi 13C phone that is locked and how to use Xiaomi Redmi 13C hard reset code to reset Xiaomi Redmi 13C, it is time to implement resolution though you can try, and among the ways given above, the best solution is to go with the Wondershare Dr.Fone - Phone Backup. It is a great tool that will immediately help you recover all of your lost information from your Xiaomi Redmi 13C phone without causing any harm to your device.

safe & secure

How to Reset a Xiaomi Redmi 13C Phone That Is Locked

“Looking for the best solutions on how to factory reset Xiaomi Redmi 13C phone when locked?”

The need to reset a Xiaomi Redmi 13C phone arises in several situations like forgetting the password, PIN, or pattern, purchasing a second-hand device that is locked, accidentally changing the password or setting a wrong one, and others. In all these and other similar situations, you would need to reset your Xiaomi Redmi 13C phone and this can be done using different methods and tools.

In this article, we will discuss all these methods that can help you reset your device so that it can be accessed without any hassles.

Part 1: Things You Should Be Aware of Before Resetting Xiaomi Redmi 13C Phones

Before you start resetting your Xiaomi Redmi 13C device through any of the methods, there are certain important things that should be considered and taken care of. Check them out as below.

• First of all, ensure that your Xiaomi Redmi 13C phone is charged so that the battery does not go off in between and stop the ongoing process.
• Ensure to clear the cache on your Xiaomi Redmi 13C phone.
• If your Xiaomi Redmi 13C phone is not locked, make sure to take the backup of the Xiaomi Redmi 13C device to prevent accidental loss of data. If the Xiaomi Redmi 13C device is locked, ensure that from next time you keep taking the backup on regular basis.

Part 2: How to Reset Xiaomi Redmi 13C Phone When Locked?

Once you have fulfilled the above mention pre-requisites, next comes the process of device resetting. If your Xiaomi Redmi 13C phone is locked, there are different methods that can help you reset your device and the popular ones can be checked as below.

Method 1: Reset Xiaomi Redmi 13C using Google’s Android Device Manager

The Android Device Manager which is also known as Find My Phone is an excellent feature that is majorly used for locating the lost or the stolen phone. This feature also allows the users to unlock and reset their devices. The Android Device Manager can only function if you know the Google ID and password that was used for device initialization. The feature can be used to erase the Xiaomi Redmi 13C device data and reset it.

Steps to reset Xiaomi Redmi 13C phone using Google Android Device Manager

• Step 1. On your PC browser, using your Google account, sign in to the Google Find My Device.
• Step 2. The list of devices will appear on the screen, from which you need to choose the Xiaomi Redmi 13C phone that you want to unlock and reset.
• Step 3. Now, from the available options, click on ERASE DEVICE.
• Step 4. Again, tap on ERASE DEVICE, and to continue you need to log in to your Google account.

With the completion of the above steps, your Xiaomi Redmi 13C phone will reset.

Method 2: Perform a Hard Reset on Xiaomi Redmi 13C with Hardware Keys

Hard reset which is also termed factory reset is a feature that will reset all the Xiaomi Redmi 13C device settings and bring them to the factory setting status. While you perform the hard reset, all the data of your phone as well as the installed apps will also be deleted.

Steps to hard reset Xiaomi Redmi 13C Phone

• Step 1. Using the Power button, turn off your Xiaomi Redmi 13C phone.
• Step 2. Press and hold the Volume Up and Power button together for a few seconds.
• Step 3. In some time, the Recovery mode will load on the screen. From the menu, choose to Wipe data/factory reset using the Volume Up/Down buttons and the selected option can be confirmed using the Power button.
• Step 4. At the space provided, enter the word Yes and then click on the Wipe data/factory reset button.
• Step 5. Again, to confirm the hard reset, click on the Wipe data/factory reset button.
• Step 6. The process of hard resetting will start and when completed, click on Reboot system now for restarting the unlocked phone.

Note: After the hard reset, Google Account Verification, FRP screen will appear where you need to enter the correct Google account or PIN that was previously synced with the Xiaomi Redmi 13C device. If you know the Google credentials, it’s great, but in case you have forgotten then no need to worry as there are Xiaomi Redmi 13C FRP bypass tools available as well as Xiaomi Redmi 13C codes that can be used to bypass the FRP lock.

Method 3: An Efficient Alternative to Reset Locked Xiaomi Redmi 13C Phone

If the above-listed methods do not work for any reason, we recommend using Dr.Fone-Screen Unlock (Android) as the best alternative. This is a Windows and Mac-based tool that can help bypass and remove all types of screen locks including PIN, passcode, pattern, Face ID as well as a fingerprint. The software not only works with Xiaomi Redmi 13C but all other popular Android devices including Xiaomi Redmi 13C, LG, Oppo, and more.

safe & secure

The screen locks can be removed without rooting, and the software is completely safe to use.

Dr.Fone - Screen Unlock (Android)

The Best Tool for factory reset Xiaomi Redmi 13C Phone When Locked

• Work perfectly to reset your Xiaomi Redmi 13C without a password.
• It’s the only solution available that works with both Windows and Mac to help you regain access to your device easily.
• Everybody can handle it without any technical background.
• Except for resetting, it also unlocks the locked Xiaomi Redmi 13C if you are using a PIN, fingerprint, or other screen locks.

4,464,992 people have downloaded it

Steps on how to factory reset Xiaomi Redmi 13C phone without password using Dr. Fone - Screen Unlock

• Step 1. Download, install and launch the Dr.Fone software on your PC and from the main menu choose the Screen Unlock feature.
• Step 2. Next, your Xiaomi Redmi 13C phone needs to be connected to the system using a USB cable, and then from the interface select Unlock Android Screen option.

• Step 3. In the next step, select your Xiaomi Redmi 13C phone’s brand from the supported list in Dr.Fone to ensure it enters the correct specific mode.

• Step 4. Dr.Fone will begin unlocking the Android screen once it enters the specific mode. Please wait for the unlock process to finish.

Part 3. How to Reset Xiaomi Redmi 13C Phone at Normal Cases?

In normal situations, the Xiaomi Redmi 13C phones can be reset using the settings menu or the Android Factory Reset code. Both these methods and their guide to getting the process done are listed below.

Method 1: Reset Xiaomi Redmi 13C phones through the Phone Settings menu

To unlock the screen and reset your Xiaomi Redmi 13C phone, the settings menu of the Xiaomi Redmi 13C device can be used. For this method, you do not need to make your device enter the recovery mode. The steps for the process are as follows.

• Step 1. On your Xiaomi Redmi 13C phone, open the Settings app and look for the Backup and Reset option from the Personalization section.
• Step 2. Next, select Factory Data Reset Option.
• Step 3. Go through the on-screen details and then click on the Reset device button.

The steps above will reset your phone to the default factory settings.

Method 2: Reset Xiaomi Redmi 13C phones with factory reset code

There are Android Reset Codes for different brands of phones that can be used for resetting the Xiaomi Redmi 13C device. These secret codes can be different phones as well as OS versions. In general, the code used for resetting Xiaomi Redmi 13C phones is *#*#2846579#*#*.

Steps to reset Xiaomi Redmi 13C phone using secret reset code

• Step 1. On your Xiaomi Redmi 13C phone, go to the dialer and type the code- *#*#2846579#*#*.
• Step 2. From the menu, click on the Restore Factory option.
• Step 3. Finally, to confirm the resetting of the Xiaomi Redmi 13C device, click on the OK button.

The above methods can also be tried if you get stuck in a situation on how to factory reset Xiaomi Redmi 13C tablets without password. Also, we recently covered a method of how to bypass the Google account on Xiaomi Redmi 13C after a factory reset, we have now had the opportunity to test this with many people with different models of Android and have found mixed results.

Conclusion

The above given are multiple options that can be used for resetting your Xiaomi Redmi 13C phone when you forget your device unlock password. Some of these solutions can be used for free and if they work, nothing like that. Dr.Fone – Screen Unlock (Android) is one of the best methods to reset your Xiaomi Redmi 13C device as it supports removing all types of screen locks in a hassle-free manner.

safe & secure