All Things You Need to Know about Wipe Data/Factoy Reset For Tecno Spark 10C

Wiping data or carrying out a factory reset on an Android device is an effective solution for various issues on your Android phone. Even if you are contemplating selling your phone and you need all your device data to be wiped out, you carry out a factory reset. But, before you proceed, what’s important is to understand about wipe data/ factory reset, because, if you don’t, you might end up losing all your important data before it is backed up, serving no purpose. So, before you wipe data/ factory reset Android, here’s what you should know about it.

Part 1: What data will be wiped by Wipe Data/Factory Reset?

Doing a factory reset on the Android device will remove all the applications installed on the Tecno Spark 10C device along with the data associated with them. This brings back all the default settings of the Tecno Spark 10C device as it was when the phone was new, giving you a clean slate to start all over again.

Since Wipe data/factory reset deletes all applications, app data, and information (documents, videos, images, music, etc) stored in the internal space, it is required for you to perform a data backup operation before you reset the Android device to factory settings. However, wipe data/factory reset does not affect the SD card in any way. So, even if you have the SD card inserted with videos, images, documents, and any other personal information in the Android device while carrying out a factory reset, everything will remain safe and intact.

Part 2: How to perform Wipe Data/ Factory Reset?

Performing wipe data/factory reset on your Android device e is very simple. It is a matter of time before you wipe out everything lying on the internal storage of your Android device. Here’s how you can perform Wipe data/ Factory Rest on your device:

Step 1: First of all, turn off the Tecno Spark 10C device. Then, use the volume up button, volume down button, and Power button on your Android device simultaneously and hold on to the buttons until the phone turns on.

Step 2: Release the buttons when the Tecno Spark 10C device is powered on. Now, use the volume up and down button to sift through the options given on the screen. Use the power button to select “Recovery Mode” on the screen. Your phone will restart into “Recovery Mode’ and you will find the below screen:

Step 3: Holding the power button down, use the volume up button, and the Android system recovery menu will pop up.

Now, scroll down to “wipe data/factory reset” option from the list of commands and use the Power button to select it.

Now, scroll down to “Yes – delete all user data” using the volume button and then push the power button to select.

In some time your device will be reset into factory settings with all your data erased. The entire process will take a few minutes. Ensure that you have the phone at least 70% charged so that it does not run out of charge midway.

Part 3: Does Wipe Data/ Factory Reset wipe all your data?

There are various instances where you would require performing a wipe/factory reset on your device. It might be because of some glitch that you would like to troubleshoot on your Android device. Wiping data from the phone is a universal solution in such cases. Even in cases where you want to sell your device, performing a factory reset seems the best option. What’s important is to make sure you don’t leave a trace of your personal information on the Tecno Spark 10C device. Therefore, wipe data/factory reset is never the ultimate solution to rely on. It is neither the best option anyway.

Contrary to conventional thought of relying on wipe data/factory reset Android believing it to be the best solution for wiping out complete data from the phone, all research outcomes have proved something different. It is easier to recover account tokens used to authenticate you when you enter a password for the first time, from service providers like Facebook, WhatsApp, and Google. Hence it is easier to restore the user’s credentials as well.

So, to protect your privacy and completely wipe data off the Tecno Spark 10C device, you can use Dr.Fone - Data Eraser. This is an amazing tool that erases everything on the Tecno Spark 10C device without leaving an ounce of data in it. Here’s how you can use Dr.Fone - Data Eraser to completely wipe the data and protect privacy:

Dr.Fone - Data Eraser

Fully Erase Everything on Android and Protect Your Privacy

• Simple, click-through process.
• Wipe your Android completely and permanently.
• Erase photos, contacts, messages, call logs, and all private data.
• Supports all Android devices available in the market.

4,683,556 people have downloaded it

Step 1: Install and launch Dr.Fone - Data Eraser

First of all, install Dr.Fone on your computer and launch it by double-clicking on the icon. You will find the below window. You will find various toolkits on the interface. Select Erase from various toolkits.

Step 2: Initiate the Process

When the tool’s window opens, click Start to trigger the operation.

Step 3: Confirm and Execute Data Eraser

To remove all data, confirm with the given code. After inputting the code, select Erase Now. A message will appear upon erasure completion. Click Erasure Report to review the types of data erased.

This will protect your privacy as your Android device will reboot into default settings with all the data erased.

Since the erased data cannot be recovered, it is highly recommended to have all the personal data backed up before operating here using Dr.Fone.

And you could watch this YouTube video for an in-depth tutorial.

Try It Free Try It Free

safe & secure

Conclusion

Hence, today we learned about wiping data and also factory reset. Well as per us, using Dr.Fone - Data Eraser is the best option as it is a simple and click-through process and helps you completely erase data from your Android. This toolkit also is the best as it supports all Android devices available in the market today.

Try It Free Try It Free

safe & secure

Is your Tecno Spark 10C working too slow? Here’s how you can hard reset it

If Tecno Spark 10C 3.4 hard reset or Tecno Spark 10C hard reset is the only option for your mobile phone, you can perform a factory reset to make your device function as it did on the first day. You may need a hard reset if it works slowly, hangs, you want to bypass screen lock, your memory is full, and you want to erase everything, you want to sell or give your device away, and you don’t want anyone to be able to access your files or passwords.

The following instructions will show you how to completely wipe up all of your data and restore the Tecno Spark 10C to its factory-fresh condition.

Part 1: Why do I Need to Hard Reset My Tecno Spark 10C?

We advise you to remove all accounts from the Tecno Spark 10C device before performing a factory reset, especially if you plan to sell, give away, or donate the 3.4. It is also a good idea to unlink the Google account. By doing this, we can prevent issues for new users as some more recent smartphones have a feature called FRP, or Factory Reset Protection, which requires the Google account or PIN number that was originally used to set up the Tecno Spark 10C when a device is factory restored.

Part 2: How to Hard Reset My Tecno Spark 10C

1. Fastboot Mode

• Shut down your phone.
• Add a USB cord to your computer or laptop.
• Your phone should now start up in Fastboot Mode after you press and hold the Volume Down + Power buttons for a few seconds. Tecno Spark 10C Recovery Mode and Fastboot Mode
• Using the ADB command, start Tecno Spark 10C in Bootloader Mode or Fastboot Mode.
• If your computer has ADB and Fastboot drivers installed, and your phone has USB debugging turned on, execute the command below after connecting it.
• Launch Command Prompt (CMD) on your PC, then type the command listed below.

reboot bootloader using adb

• After some time, you will see that your Tecno Spark 10C has been hard reset.

2. Hard reset with hardware key button

• Choose “wipe data/factory reset” on your Tecno Spark 10C to do a hard reset. Scroll down with the Volume buttons, and press the Power key to agree.
• Next, choose yes from the menu if further confirmation is required, and then click the Power button once.
• Lastly, press the Power key and choose the Reboot system.
• Do not forget to charge your phone.
• Initially, turn off your phone.
• Now Press the Volume Up + Power key for a few seconds to enter recovery mode.
• Press and hold the Power and Volume Up buttons at the same time until the Tecno Spark 10C device vibrates. Release all the presses if the Tecno Spark 10C logo or Recovery screen shows.
• You can give your phone up to 30 seconds to display the recovery screen.

Bonus Tips

Dr.Fone - Data Eraser (delete all data completely)

Dr.Fone - Data Eraser helps you quickly get rid of all the unwanted information and all of your data however it is always advisable to back it up using the Dr.Fone - Phone Backup.

Let’s see how you can delete completely all the data using Dr.Fone - Data Eraser. do not worry the next section is about how you can back up and restore the data before erasing it completely using Dr.Fone - Phone Backup.

Step 1: Connect your Tecno Spark 10C smartphone to your computer. Start Dr.Fone on your computer. Select “Data Eraser” from the tool list.

Connect your Tecno Spark 10C to the PC via a USB wire. Ensure that your phone has USB debugging turned on. You will see a pop-up window on your phone asking you to approve USB debugging.

Step 2: Begin wiping your Tecno Spark 10C phone.

Dr.Fone will then automatically recognize and connect to your Tecno Spark 10C smartphone. To begin wiping all of your data, select “Erase All Data.”.

Before proceeding, ensure that you have backed up any critical data because deleted data cannot be retrieved. After that, type “000000” to confirm your activity.

Dr. Fone will next proceed to wipe the data on your Tecno Spark 10C phone. The entire procedure takes only a few minutes. Turn off the phone and do not run any phone administration programs on the PC.

Step 3: Reset your phone’s factory data.

Once all app data, photos, and other private data have been completely erased, Dr.Fone will advise you to touch on Factory Data Reset or Erase All Data on the phone. You may use this to completely delete the phone’s settings.

Your Tecno Spark 10C phone has now been completely wiped, giving it the appearance of being brand new.

safe & secure

Dr.Fone - Phone Backup (easy backup before a new hard reset)

Step 1: Connect your Tecno Spark 10C phone to your PC.

Launch Dr.Fone on your PC and choose “Phone Backup” from the list of options.

Then, connect your Tecno Spark 10C phone to the computer using a USB cord. Please ensure that the phone is in USB debugging mode. If your Tecno Spark 10C version is 4.2.2 or higher, a pop-up window on the Tecno Spark 10C phone will prompt you to accept USB Debugging. Please press the OK button.

To begin backing up the data on your Tecno Spark 10C phone, click Backup.

If you have previously used this application to back up your device, you may examine your backup history by clicking on “View backup history.”

Step 2: Choose which file types to back up.

After connecting the Tecno Spark 10C phone, pick the file types you wish to back up. Dr.Fone has already tested all of the file kinds for you. Then, to begin the backup process, click Backup.

The backup will take a few moments. Please do not detach your Tecno Spark 10C phone, use it, or erase any data from it during the backup process.

When the backup is finished, you can view the contents of the backup file by clicking the View the backup button.

safe & secure

The Bottom Line

Now that you know how to hard reset Tecno Spark 10C it is time to implement all the possible ways and see which one works for you. We also recommend you to proceed with backing up and restoration of all the information so that you will not have to repent in the end. It is all about using smart tools like Dr.Fone - Data Eraser and Dr.Fone - Phone Backup.

Full Guide to Hard Reset Your Tecno Spark 10C

Tecno Spark 10C hard reset is needed when you wish to sell your phone or give it to someone. In such situations, you must have your data removed from the phone. So, to remove the whole data with a single click, there is no better method than a hard reset. A hard reset will remove photos, videos, contacts, applications, messages, etc. Therefore, you should use a reliable source to help save your system files. In this regard, we suggest Wondershare Dr.Fone.

Dr.Fone by Wondershare is a reliable tool for all your Android needs. It can erase, recover, unlock, back up, and do other things with just a single software. Therefore, this article explains how to reset Tecno Spark 10C and use Dr.Fone. We assure you that your privacy will be safe, and no file corruption will occur while using this program.

Part 1: Some Common Causes About Tecno Spark 10C Hard Reset

Some of the most common situations that require Tecno Spark 10C Hard Reset are:

• When you try to sell your Tecno Spark 10C phone or give it to others, you must delete your data. To do so, you must hard reset your phone.
• Too many wrong password/pattern attempts can lock your device. Hence, a hard reset will unlock your phone in recovery mode.
• If your device functions too slowly, a hard reset will make it faster. A hard reset will clear the cache and unwanted files, so your phone runs smoothly.
• Lastly, an Tecno Spark 10C hard reset prevents your device from constant crashes. Therefore, if your phone has some software issue, look no further.

Part 2: Easy Ways for Your Tecno Spark 10C Hard Reset

1. Hard Reset from Settings

Step 1: Before you continue with the hard reset or factory reset on your Tecno Spark 10C smartphone. However, make sure you have a backup of the important data put away on the phone.

Step 2: If you wish to do a straightforward hard reset, head to the Settings menu and search “Erase All Data” or “Factory Reset”.

Step 3: Tap the “Erase All Data” choice and snap on “OK” once you find it.

Step 4: Approve the command in the popup window. However, ensure that your Tecno Spark 10C phone has an adequate battery to start and reset. You can put your phone on charging if the battery levels are low.

Click here

2. Recovery Mode

Recovery mode assists you in opening the hidden features on your Tecno Spark 10C. By utilizing the Recovery mode, you can perform a hard reset on your device and wipe data. The following are the steps to get to the recovery mode on Tecno Spark 10C and complete the hard reset:

Step 1: Firstly, your Tecno Spark 10C must be turned off to perform a hard reset. Press and hold the power key on your Tecno Spark 10C smartphone for around 10 seconds to turn it off.

Step 2: Simultaneously, press and hold Power and the volume down keys until the Tecno Spark 10C logo springs up on the screen. That will raise the Recovery mode screen.

Step 3: Select your preferred language and tap on “Wipe Data”.

Step 4: You will be approached to enter the confirmation code (screen lock PIN).

Step 5: Complete the above steps and select the Format Data choice afterward.

Step 6: Click OK to finish the process, and that’s how to reset Tecno Spark 10C phone.

3. Dr.Fone-Data Eraser

Whether you intend to Change your phone/tablet or give them to somebody, you should delete your data. However, the physically deleted records on Android can be restored, especially with some expert tools. In light of this, the Dr.Fone Data Eraser ensures you erase information on Tecno Spark 10C permanently. It can’t be recovered using any means, including proficient tools. Here’s how:

• Open Dr.Fone on your PC and select “Data Eraser,” among other tools.

• Connect your Tecno Spark 10C phone to the PC through a USB cable.

• Click the “Erase All Data” button to eradicate all your data.

• Key in “000000” into the popup window to affirm your activity.

• Then, at that point, Dr.Fone will begin deleting all data on your Tecno Spark 10C phone.

• Then click the Factory Data Reset or Erase All Data on the phone. That will assist you with totally cleaning all the settings on the phone.

safe & secure

4. Dr.Fone-Phone Backup

Dr.Fone Phone Backup (Android) is a wonderful tool for backups and restoration that you can depend on totally. It has a backup feature that can back up a large portion of the Tecno Spark 10C files. Not just those, the backup tool can likewise recover files from your Android phone or tablet PC if you lose them unexpectedly. The method involved with backing up is quick enough. At the same time, you can select a few files to recover, which will save time. Here’s what you need to do:

• Open Dr.Fone on your PC, and select the “Phone Backup” tool.

• Then, at that point, connect your Tecno Spark 10C phone to the PC through a USB cable and tap on OK.

• Click Backup to begin the Backup of Tecno Spark 10C phone data.
• After the Android phone is connected, select the File types you need to back up. Of course, Dr.Fone has checked all the document types for you. Then click on Backup to begin.

• The process will require a couple of minutes.

• After it is finished, you can tap on View the backup button to see what’s in the backup record.

safe & secure

Conclusion

Above are some strategies with which you can do an Tecno Spark 10C hard reset. However, a backup is needed if you don’t want to lose your data after a reset. Therefore, in the end, we have mentioned the best tools for that purpose. You must consider these tools before going for a simple reset. Anybody can perform the last two sections (Dr.Fone tools) without issue. Therefore, we strongly suggest you download and install the Dr.Fone tool by Wondershare.