All Things You Need to Know about Wipe Data/Factoy Reset For Tecno Spark 10 Pro

Wiping data or carrying out a factory reset on an Android device is an effective solution for various issues on your Android phone. Even if you are contemplating selling your phone and you need all your device data to be wiped out, you carry out a factory reset. But, before you proceed, what’s important is to understand about wipe data/ factory reset, because, if you don’t, you might end up losing all your important data before it is backed up, serving no purpose. So, before you wipe data/ factory reset Android, here’s what you should know about it.

Part 1: What data will be wiped by Wipe Data/Factory Reset?

Doing a factory reset on the Android device will remove all the applications installed on the Tecno Spark 10 Pro device along with the data associated with them. This brings back all the default settings of the Tecno Spark 10 Pro device as it was when the phone was new, giving you a clean slate to start all over again.

Since Wipe data/factory reset deletes all applications, app data, and information (documents, videos, images, music, etc) stored in the internal space, it is required for you to perform a data backup operation before you reset the Android device to factory settings. However, wipe data/factory reset does not affect the SD card in any way. So, even if you have the SD card inserted with videos, images, documents, and any other personal information in the Android device while carrying out a factory reset, everything will remain safe and intact.

Part 2: How to perform Wipe Data/ Factory Reset?

Performing wipe data/factory reset on your Android device e is very simple. It is a matter of time before you wipe out everything lying on the internal storage of your Android device. Here’s how you can perform Wipe data/ Factory Rest on your device:

Step 1: First of all, turn off the Tecno Spark 10 Pro device. Then, use the volume up button, volume down button, and Power button on your Android device simultaneously and hold on to the buttons until the phone turns on.

Step 2: Release the buttons when the Tecno Spark 10 Pro device is powered on. Now, use the volume up and down button to sift through the options given on the screen. Use the power button to select “Recovery Mode” on the screen. Your phone will restart into “Recovery Mode’ and you will find the below screen:

Step 3: Holding the power button down, use the volume up button, and the Android system recovery menu will pop up.

Now, scroll down to “wipe data/factory reset” option from the list of commands and use the Power button to select it.

Now, scroll down to “Yes – delete all user data” using the volume button and then push the power button to select.

In some time your device will be reset into factory settings with all your data erased. The entire process will take a few minutes. Ensure that you have the phone at least 70% charged so that it does not run out of charge midway.

Part 3: Does Wipe Data/ Factory Reset wipe all your data?

There are various instances where you would require performing a wipe/factory reset on your device. It might be because of some glitch that you would like to troubleshoot on your Android device. Wiping data from the phone is a universal solution in such cases. Even in cases where you want to sell your device, performing a factory reset seems the best option. What’s important is to make sure you don’t leave a trace of your personal information on the Tecno Spark 10 Pro device. Therefore, wipe data/factory reset is never the ultimate solution to rely on. It is neither the best option anyway.

Contrary to conventional thought of relying on wipe data/factory reset Android believing it to be the best solution for wiping out complete data from the phone, all research outcomes have proved something different. It is easier to recover account tokens used to authenticate you when you enter a password for the first time, from service providers like Facebook, WhatsApp, and Google. Hence it is easier to restore the user’s credentials as well.

So, to protect your privacy and completely wipe data off the Tecno Spark 10 Pro device, you can use Dr.Fone - Data Eraser. This is an amazing tool that erases everything on the Tecno Spark 10 Pro device without leaving an ounce of data in it. Here’s how you can use Dr.Fone - Data Eraser to completely wipe the data and protect privacy:

Dr.Fone - Data Eraser

Fully Erase Everything on Android and Protect Your Privacy

• Simple, click-through process.
• Wipe your Android completely and permanently.
• Erase photos, contacts, messages, call logs, and all private data.
• Supports all Android devices available in the market.

4,683,556 people have downloaded it

Step 1: Install and launch Dr.Fone - Data Eraser

First of all, install Dr.Fone on your computer and launch it by double-clicking on the icon. You will find the below window. You will find various toolkits on the interface. Select Erase from various toolkits.

Step 2: Initiate the Process

When the tool’s window opens, click Start to trigger the operation.

Step 3: Confirm and Execute Data Eraser

To remove all data, confirm with the given code. After inputting the code, select Erase Now. A message will appear upon erasure completion. Click Erasure Report to review the types of data erased.

This will protect your privacy as your Android device will reboot into default settings with all the data erased.

Since the erased data cannot be recovered, it is highly recommended to have all the personal data backed up before operating here using Dr.Fone.

And you could watch this YouTube video for an in-depth tutorial.

Try It Free Try It Free

safe & secure

Conclusion

Hence, today we learned about wiping data and also factory reset. Well as per us, using Dr.Fone - Data Eraser is the best option as it is a simple and click-through process and helps you completely erase data from your Android. This toolkit also is the best as it supports all Android devices available in the market today.

Try It Free Try It Free

safe & secure

Hard Resetting an Tecno Spark 10 Pro Device Made Easy

If you have owned any Tecno Spark 10 Pro smartphone, you should know about the UI features these handsets offer. The new age of Color OS has been giving the best client experience. Moreover, it is easier to hard reset your Tecno Spark 10 Pro phone if you need to sell a phone. This article will guide you on resetting Tecno Spark 10 Pro phone with simple steps.

We have shared a step-by-step manual on how you can perform Tecno Spark 10 Pro hard reset. Several methods are mentioned in this article, and all of them are tested. Resetting any Tecno Spark 10 Pro phone is not a hard task. You should know about the right steps. However, we suggest you use Dr.Fone - Data Eraser for better results and more commands. It is hassle-free software and lets you selectively delete the desired data from your phone.

Part 1: Some Common Causes of Tecno Spark 10 Pro Hard Reset

There are many occasions when a person may want to hard reset their Tecno Spark 10 Pro phone. Some of these are:

• If your Tecno Spark 10 Pro runs too slowly, you may need to reset it to clear some space.
• When you lose your password or pattern, you will need to reset your device hard to remove the screen lock.
• You can repair a frozen or stuck screen using a hard reset.
• If your phone is constantly crashing, and you want to make your experience smoother, a hard reset may help.
• Lastly, you need to remove everything from your phone when you are looking to sell your phone. In such cases, a hard reset will do your work quickly.

Part 2: 2 simple ways to hard reset your Tecno Spark 10 Pro

1. Hard Reset from Settings

• Step 1. Go to the Settings application on your Tecno Spark 10 Pro phone and open System Settings.

• Step 2. Go to the “Backup and Reset” menu and click the “Reset Phone” option.
• Step 3. The phone will show numerous choices to reset. It includes resetting network settings, system settings only, contacts, call logs, messages, etc. Moreover, there will be the “Erase All Data” option too.
• Step 4. To hard reset Tecno Spark 10 Pro, pick the Erase All Data option to reset your device and bring it to factory settings.

2. From Recovery Mode (By Hardware Keys)

Hard resetting Tecno Spark 10 Pro smartphones is also simple, assuming you know the right steps. The following are the steps to get to the recovery mode on Tecno Spark 10 Pro smartphones and do an Oppo hard reset. This method is quite helpful when you don’t remember your phone’s screen lock.

• Step 1: Make sure to power off your Tecno Spark 10 Pro smartphone to get started. Press and hold the power key on your Tecno Spark 10 Pro phone for about 10 seconds.
• Step 2: Simultaneously, press and hold the power and Volume down keys until the Tecno Spark 10 Pro logo springs up on the screen. This will bring the Recovery mode screen.
• Step 3: Select your preferred language using the Volume and Power buttons, and then tap on “Wipe Data”.

• Step 4: You will be approached to enter the confirmation code (screen lock PIN).
• Step 5: Complete step 4 and afterward select the Format data choice.
• Step 6: Select OK to finish the hard reset strategy on your Oppo device.

Part 3: Best Tools to Make your Tecno Spark 10 Pro Hard Reset Easier

To make your Oppo hard reset experience easier, you need to look for an expert service. We would suggest you use Wondershare Dr.Fone. Dr.Fone is an all-in-one professional software for screen unlock, data erasure, data recovery, system repair, and more. In case of a hard reset, if you have forgotten the screen lock, you can use their Screen Unlock feature. Interestingly, their Data Erasure software provides the full command to its users. You can use it to delete the desired files or fully reset your phone. Overall, it is a safe tool with an almost 100% access rate. It works with almost 99% of the Android phones available in the market and has great customer support service. Therefore, download it right away and make your hard reset experience smoother.

Steps to Use Dr.Fone - Screen Unlock (Android)

• Step 1: After launching Dr.Fone, please use a USB cable to connect your Tecno Spark 10 Pro phone. And tap the “Screen Unlock” option.
• Step 2: Please select the left part with 3 phones, “Unlock Android Screen” to proceed.

• Step 3: To unlock Tecno Spark 10 Pro phone, the left “100% Remove Screen Lock” is the only feasible way. In this interface, we include most android brands. And as Tecno Spark 10 Pro user, it’s also in the list we offered.

• Step 4: Recovery mode is the key step for the whole process. Here is a simple guide to help you hard reset your Tecno Spark 10 Pro device.

• Congrats! You’re able to access your Tecno Spark 10 Pro phone without hassle and it’s already hard reset!

safe & secure

Steps to Use Dr.Fone - Data Eraser (Android)

• Step 1: Open Dr.Fone’s program and select the “Data Eraser” tool.
• Step 2: Connect your Tecno Spark 10 Pro phone to the PC through a USB connector.
• Step 3: Click on the “Erase All Data” button to begin. Ensure you have backed up your important files before you continue.

• Step 4: Then type in “000000” to affirm your action. Then Dr.Fone will begin deleting all data on your phone.

• Step 5: Tap on Factory Data Reset or Erase All Data on the phone. This will assist you with totally cleaning up the settings on the phone.

• Presently, your Android phone has been wiped, and it can be used as a new one.

safe & secure

Conclusion

Resetting an Tecno Spark 10 Pro phone can be tricky sometimes; therefore, it should be finished with the right tools and strategies. Above, we have listed multiple ways to hard reset Tecno Spark 10 Pro. You need to pick the best strategy according to your situation. However, for an easy, solid, protected, and speedy technique, we recommend Dr.Fone by Wondershare . It provides multiple tools in a single program and has a higher success ratio compared to the other methods. So install it right away for a speedy hard reset of your Tecno Spark 10 Pro device.

You Might Also Like

How to Reset Tecno Spark 10 Pro without Losing Data

Nothing good lasts forever, not even your all-singing, all-dancing new Android smartphone. The warning signs are obvious, apps taking forever to load, constant force close notifications, and a battery life shorter than an episode of Westworld. If you recognize these symptoms then listen up, because your phone may be headed for a meltdown and there’s only one thing left to do. It’s time to reset your Android phone.

Before taking the plunge, there are a number of factors to consider. We’ve put together a quick guide to let you know what you need to know… and what you need to do. Before we start deleting stuff, however, it’s important to understand what a Factory reset is.

Part 1: What is Factory Reset?

There are two types of reset for every Android device, soft and hard resets. A soft reset is just a way to force the Android operating system to shut down in the event of a freeze and you only risk losing any data which wasn’t saved prior to the reset.

A hard reset, also known as a factory reset and a master reset, returns the Tecno Spark 10 Pro device to the condition it was in when it left the factory. Performing a factory reset will permanently delete any and all personal data you have on your device. This includes any personal settings, apps, pictures, documents, and music stored on your device. A factory reset is irreversible, which means before considering taking this step, it is a good idea to back your data and settings up. A factory reset is a great way to purge buggy updates and other malfunctioning software and can give your phone a new lease of life.

Signs You Need to Reset Phone

You’ll probably already know if your phone needs a reset, but if you’re unsure, look for some of the following signs. If you recognize any of the following symptoms then a factory reset is probably a good idea.

1. If your phone is running slowly and you’ve already tried deleting Apps and data, but it hasn’t resolved anything.
2. If your Apps are crashing or you keep getting ‘force close’ notifications from your operating system.
3. If your Apps are taking longer to load than usual, or your browser is running slow.
4. If you find your battery life is worse than usual and you need to charge your phone more often.
5. If you are selling, exchanging, or just giving your phone away. If you don’t reset it, the new user can gain access to cached passwords, personal details, and even your pictures and videos.

Remember factory resetting will erase everything on your device, so it’s essential that you back up anything you can’t afford to lose.

Part 2: Back Up Your Data Before Factory Reset

There are a number of Android data backup software for PC out there. Having a Google account will help you save your contacts and settings, but it won’t save your pictures, documents, or music. There are numerous cloud-based systems available like Dropbox and Onedrive where your data is saved onto a cloud-based server, but you’ll need a data connection or wi-fi to restore to your device and of course, you are trusting a third party with your data. We recommend Dr.Fone Basic . It’s easy to use and will save everything and best of all you know exactly where it is.

Dr.Fone - Phone Backup (Android) enables you to backup all your data, including contacts, messages, call history, calendar, video and audio files, etc. You can choose to individually back up data or everything directly to your computer and then restore it whenever you like.

Back up and restore data from your device to a computer with a single click. It’s a tried and tested program and compatible with over 8000+ devices. To use it, click the link, download it and follow these instructions.

Dr.Fone Basic

Backup & Restore Data Turns Flexible

• One-click to back up the whole iOS and Android device to your computer.
• Export what you want from the backup to your computer.
• Your device’s data remains intact during the restore process.
• Fully compatible with the latest iOS and Android version.

3,823,152 people have downloaded it

How to backup Android phone with Dr.Fone Basic

Step 1. Open Dr.Fone on your computer and connect your Android device. Go to My Backup > Back Up Now. Set the Dr.Fone Link app as your default SMS app on your Android device.

Step 2. Wait for the backup process to complete. A progress bar will show you how far along it is.

Step 3. Once the backup is done, it’ll show up in your window. To see the backup on your PC, click Open in Folder. If you want to see all backups, select View Backups.

Also, you can watch this video to learn more details.

safe & secure

Part 3: How to Factory Reset Android Phone

After your data is safely tucked away, it’s time to tackle the reset itself. There are a few different ways to reset your device and we’ll look at them all in turn.

Method 1. Using the Settings Menu To Factory Reset Your Device

You can factory data reset your Android device via the settings menu by following these steps.

Step 1. Open your phone, drag down the ‘Options’ menu and select the ‘Settings’ menu. Look for the little cog in the top right of your screen.

Step 2. Find the option for ‘Back up and Restore’ (please note - using Google to back up your account is a good idea, but it won’t save your music, documents, or pictures.)

Step 3. Press the button for ‘Factory Data Reset’ (please note - this is irreversible)

Step 4. If you have done this correctly a little Android robot will appear on your screen as the Tecno Spark 10 Pro device resets itself.

Method 2. Resetting Your Phone in Recovery Mode

If your phone is misbehaving it might be easier to reset it via Recovery Mode. To do this you must turn your device off first.

Step 1. Press and hold the Volume up button and the Power button at the same time. The phone will now boot in Recovery Mode.

Step 2. Use the Volume down button to choose Recovery Mode. To navigate use the Volume up button to move the arrow and the Volume down button to select.

Step 3. If done correctly. You’ll find an image of an Android robot alongside a red exclamation mark and the words ‘No command’.

Step 4. Hold down the Power button and press the Volume up button then release it.

Step 5. Using the volume buttons scroll to ‘wipe data/factory reset’ and then press the Power button.

Step 6. Scroll to ‘Yes - erase all user data’ and to complete the process press the Power button.

Please note: Devices running Android 5.1 or above, will still require you to enter your Google Password to complete this reset.

Method 3. Resetting Your Phone Remotely With Android Device Manager

You can also perform a factory reset by using the Android Device manager App. Obviously, you’ll need to have Android Device Manager installed on your phone for which you’ll need a Google Account.

Step 1. Sign in to the App and locate your device on whatever medium you are currently using. With Android Device Manager it is possible to Factory Reset a device remotely by using a PC or other device, but your phone must be logged into your Google account and have an active internet connection.

Step 2. Select erase all data. This is particularly effective if you have lost or had your phone stolen and your device is running Android 5.1 or higher as whoever has your phone will still need your Google Password to be able to reset the Phone.

Please note: this reset will also delete Android Device Manager and you will therefore be unable to locate or track your device.

Once you have successfully reset your Android device to its factory settings, all you need to do is restore your original data. After you’ve completed this step your device should be just like new.

Part 4: Restoring Your Phone After a Reset

It can be quick and scary seeing your phone return to its original state. But don’t panic. Your data is still safely tucked away on your computer. To restore your contacts and Apps just connect your Tecno Spark 10 Pro to the Internet and login into your Google account when prompted.

Once you have restarted your mobile, connect it to your PC and open Dr.Fone on your computer. Select Phone Backup, and click on the Restore button to start restoring the data to your phone.

Dr.Fone will display all the backup files. Select the backup file you would like to restore and click View.

Then you will be able to select what files you want to restore. You can click Restore to Device to restore them all to your phone or just select individual data to restore.

Once you’ve successfully completed your first reset, you’ll realize how simple the whole process is and the next time you need to perform one, you’ll be able to do it with your eyes closed.

safe & secure

Bonus Tip: Are You Preparing to Exchange Your Phone?

After factory resetting your Android Phone, your phone should work smoothly. But what should we do if your phone is still not working as before? The App still crashes or your phone is still running slow, which may be caused by an old operating system or the phone is too old. It is time to change to a new phone. In this case, you may want to switch the data from the old phone to the new phone. How do achieve that? Dr.Fone - Phone Transfer is here. It is a dedicated tool to transfer everything from one old device to the new one! You can transfer data without any hassle because of user-friendly instructions.

Dr.Fone - Phone Transfer

Transfer Everything from Old Devices to New Devices in 1 Click!

• Works directly and transfer data between two cross-operating system devices in real-time.
• Works perfectly with Apple, Tecno Spark 10 Pro, HTC, LG, Sony, Google, HUAWEI, Motorola, ZTE, Tecno Spark 10 Pro, and more smartphones and tablets.
• Fully compatible with major providers like AT&T, Verizon, Sprint, and T-Mobile.
• Fully compatible with the latest iOS and Android.

3981454 people have downloaded it

Conclusion

Resetting your Android device can resolve performance issues and prepare it for resale or gifting. However, a factory reset erases all personal data, making it essential to back up your data before proceeding.

Tools like Dr.Fone Basic are recommended for this purpose. You can perform a factory reset using the settings menu, recovery mode, or Android Device Manager. Remember, a factory reset is irreversible, so take every precaution necessary to safeguard your important data.

Thank you for reading and if we’ve been of some help please take the time to bookmark our page.